Aim Kit Solo 2 DL for Aprilia RSV4 (from 2017) Installation guide

Fix Solo 2/Solo 2 DL bracket

to the adapter bracket

for Aprilia RSV4

using the two countersunk

screws you find in the kit

Screw the 8x45 pan head Allen screw

in the toothed washer and screw

the rubber nut under

Aprilia adapter bracket

Fig. 1

Fig. 2

Fig. 3

Kit AiM Solo 2/Solo 2 DL for Aprilia RSV4

Installation guide

Insert the assembled kit

in the handle bar hinge

until the distance piece

abuts the hinge

Fig. 4

8x45 screw

Washer

Rubber nut

Tighten the central screw

on the hinge so that this last grips

Fig. 5

Hook Solo 2/Solo2 DL

to its bracket

Fig. 6

Fix it using the screws already

inserted rear on Solo 2/Solo 2 DL bracket

AiM Tech Srl - Via Cavalcanti, 8 20063 Cernusco sul Naviglio, Milan - Italy | Tel. +39.02.9290571 | Fax +39.02.92118024

info@aim-sportline.com | www.aim-sportline.com