Aim Kit Solo/SoloDL for Yamaha YZF-R1-R1 2015 Installation guide

Insert the screw

in the bracket

and in the rubber

washer.

Screw the rawl nut

on the screw.

Fix Solo and Solo bracket

on the kit bracket using

M4x10 screws.

Insert the rawl nut in the

handle bar hinge.

Hook Solo/SoloDL

to its bracket.

Screw the central screw

on the hinge so that this

last grips.

Fix Solo screwing

the kit bracket screws.

Fig. 1/6

Fig. 3/6

Fig. 5/6

Fig. 2/6

Fig. 4/6

Fig. 6/6

Kit AiM Solo/SoloDL for Yamaha R1-R1M 2015

Installation guide

Ver. 1.00

AiMTech Srl - Via Cavalcanti, 8 20063 Cernusco sul Naviglio, Milan - Italy | Tel. +39.02.9290571 | Fax +39.02.92118024

[email protected] | www.aim-sportline.com

M6x60mm screw

Rubber washer

Solo adapter bracket

Rawl nut

M4x10mm screws

Solo adapter bracket

Solo bracket