2. Aim
  3. MX2E
MX2E

Aim MX2E Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Aim MX2E Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Remove the indicated original parts.
Remove the original cluster.
Remove the original dashboard.
Install the MX2E on the original bracket.
Note: it is not necessary to remove the steering wheel.
1/2
AiM Lotus cluster
Installation guide
AiM Tech Srl - Via Cavalcanti, 8 20063 Cernusco sul Naviglio, Milan - Italy | Tel. +39.02.9290571 | Fax +39.02.92118024
info@aim-sportline.com | www.aim-sportline.com
Figure 1/7
Figure 3/7
Figure 2/7
Figure 4/7
4 x Nylon washers supplied
4 x steel washers supplied 4 x M4x10mm screws supplied
AiM Lotus cluster
Installation guide
AiM Tech Srl - Via Cavalcanti, 8 20063 Cernusco sul Naviglio, Milan - Italy | Tel. +39.02.9290571 | Fax +39.02.92118024
info@aim-sportline.com | www.aim-sportline.com
Figure 5/7
Figure 6/7
2/2
Connect MX2E with AiM cluster.
Install MX2E and AiM cluster.
AiM Cluster
MX2E
Right buttons cable
Exp cable
Connect
to existing car cable harness
Left buttons cable
Figure 7/7
Re-install the original parts.
/