NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 011206
Product Dimensions
Decorator Island Hood
DA5100
E
4 1/2"
27 9/16"
39 3/8"
42 "
15 3/16"
14 3/4"
2"
120 Volt - 15 Amp 3-wire power supply
connects attop of chimney.
Notes
• All installations must be done in
accordance with local codes.
• Mounting plate must be used.
• 6" duct connects to mounting plate at top
of chimney.
Location Codes
E -
Front Perspective
NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 011206
Front Perspective
Chimney mounting plate
Ceiling mounting plate
Notes
• Center unit over cooking surface
• Bolt spacers to structural members
• Attach ceiling mounting plate to spacers in
ceiling using supplied mounting bolts
• External ducting connects to ceiling
mounting plate
• Connect chimney mounting plate to ceiling
mounting plate using supplied mounting
bolts.
Chimney mounting plate
Ceiling mounting plate
Ceiling
Structural Ceiling Members (16" centers)
2 x 4 spacers
(bolt to structural members)
Chimney
Mounting Bolts
Installation Dimensions
Decorator Island Hood
DA5100
NOTE: Unit must be secured to
structural members in ceiling.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Wolf CTWH30 Operating instructions
-
Quadrafire Pioneer III Wood Fireplace Installation guide
-
Quadrafire Pioneer II Wood Fireplace Installation guide
-
Quadrafire 7100 Wood Fireplace Installation guide
-
Superior HCI-42 User manual
-
Monessen Hearth BWBC400 User manual
-
Vermont Castings FREESTANDING WOODBURNER Specification
-
Vermont Castings Resolute Acclaim 2490 User manual
-
Vermont Castings Intrepid II Owner's manual
-
Vermont Casting 1640 User manual
