Welch Allyn Connex Integrated Wall System User manual

Category
Blood pressure units
Type
User manual
ConneIntegrated Wall System
2.2 Software Version
Clinical Inservice Presentation
MC12931 1
Table of Contents
Device Overview & Intended Use
Power ON
Power OFF
Home Screen Navigation
Spot Profile
Intervals Monitoring Profile
Office Profile
Using Office Profile
Taking a Non-invasive Blood Pressure
Proper BP Technique
Initiating Interval Blood Pressures
Setting Up Interval Blood Pressures
Obtaining an SpO
2
and Pulse Rate
Taking Temperatures using SureTemp® Plus
Taking Temperatures using Braun 4000
Manual Entry of Parameters & Clear Function
Alarm Management
Manual Parameter Entry
Patient Modifier Entry
Saving and Reviewing Vital Signs
Diagnostic Information
Cleaning
Advanced Settings
Conclusion & Resources
2
Device Overview & Intended Use
Use to obtain vital signs
and other parameters
Adults (>12 yrs)
Pediatric (29 days-12 yrs)
Neonate (<28 days)
Return to Table of Contents
3
Power On
Power ON
Press Power
Button on the front
Return to Table of Contents
4
Power Off
Power OFF
1. Press Power
Button
2. Select Power
Down on main
screen
Return to Table of Contents
5
The Home Screen
The home screen is
divided into three
areas:
Device Status Area
Content Area
Navigation Area
Lets look at each area.
Return to Table of Contents
6
Device Status Area
Provides device status
information, including:
Clinician ID (if applicable)
Device location (i.e. nursing unit)
Time
Date
Battery life information
Connection status (if applicable)
Alarms and Messages and Patient
Profile
(i.e. Spot, Intervals, or Office)
Return to Table of Contents
7
Content Area
Displays:
Vital sign measurements
Patient information (if
applicable)
Manual parameters
Shortcuts to alarm controls
Save button
Return to Table of Contents
8
Navigation Area
Provides tabs for:
Home
Patient List*
Alarms*
Review*
Settings
*Depending upon profile
selected
Return to Table of Contents
9
Spot Profile
Features:
No alarms
No BP intervals
Take SpO
2
sensor OFF
prior to touching
SAVE
Return to Table of Contents
10
Features:
Automatic, Program, and
Stat interval settings
Parameter alarms
SpO
2
sensor should stay
ON while you touch
SAVE
Intervals Profile
Return to Table of Contents
11
Office Profile
Features:
No alarms
Averaging interval program
enables you to record the
patient's average NIBP
readings over a set period of
time.
Take SpO
2
sensor OFF prior
to touching SAVE
HT, WT, RR, Pain, and BMI if
applicable
Return to Table of Contents
12
Follow this link for a Quick Reference
Guide for Office Profile:
http://www.welchallyn.com/content/
dam/welchallyn/documents/sap-
documents/LIT/80017/80017737LITP
DF.pdf
Using Office Profile
13
From Home Screen
select clock under
start NIBP to view BP
averaging programs
Choose desired
program and select
“Start Intervals”
Program runs and
displays all readings
and Averaged BP
Return to Table of Contents
Changing Patient Profiles
To change Profiles:
1. Touch the current Profile
showing in the Device
Status Area
2. Choose the appropriate
profile. Your choices may
include:
1. Office
2. Triage
3. Spot
4. Intervals
5. Continuous
Return to Table of Contents
14
Taking a Non-Invasive Blood Pressure (NIBP)
Proper technique is very important for accurate readings
Uses SureBP® technology that captures BP on cuff inflation
Will revert to Step deflation method
in times of extreme movement
artifact
Neonate mode
if programmed to do so via Advanced Settings
Touch the START button to initiate a BP.
Touch the STOP button to cancel a BP in progress.
Return to Table of Contents
15
Proper Blood Pressure Technique
No more than two fingers between cuff and
arm
Patient sitting quietly; not moving
Back supported; legs uncrossed
Arm at heart level
Align Artery Index Marker with brachial artery
Proper sized cuff
FlexiPort® should be to the outside of the
patients body
Return to
Table of Contents
16
Proper Blood Pressure Technique
For more information on Blood Pressure technique, go to:
https://www.youtube.com/watch?v=ScbFRb1dKc4&index=21&list=PLkXnwo
kwhxrU8d-LnfwYy2Lsjzqa2z7kX
Return to Table of Contents
17
Simple Steps for Initiating BP Intervals
1. Touch within the BP frame on the
Home Screen
2. Choose “Automatic” or “Program”
3. Adjust intervals in minutes (Automatic) or
choose appropriate program (Program)
4. Touch “Start Intervals”
Return to Table of Contents
18
Taking Interval Blood Pressures: Overview
Access the Interval options by touching the clock icon within the NIBP
frame
Choose Automatic, Program, or Stat
Stat takes multiple BPs in a 5-minute period
Return to Table of Contents
19
Taking Automatic Interval Blood Pressures: Automatic
Adjust Automatic Interval setting in minutes
Touch arrow keys
OR
Touch small keyboard icon in bottom right of “minutes” window
Touch Start Intervals
Return to Table of Contents
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39

Welch Allyn Connex Integrated Wall System User manual

Category
Blood pressure units
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI