FSR FL-200-SLD-ALU-C User manual

FSR
Brand
FSR
Model
FL-200-SLD-ALU-C
Type
User manual

This manual is also suitable for

FSR 244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: 973.785.4347 - Fax: 973.785.4207
43092 LIT1558A
BOX INSTALLATION - STEP 1
LOCATE AND POSITION BOX IN ACCORDANCE WITH FLOOR
PLANS. TOP SURFACE OF TEMPORARY COVER MUST BE SET
TO MATCH THE HEIGHT OF THE FINISHED FLOOR - ie STONE,
WOOD OR CONCRETE - SEE TYPICAL INSTALLATION HEIGHTS.
LEVEL AND ANCHOR BOX AS REQUIRED. USE SCREWS, NAILS,
OR WIRE TO PREVENT BOX FROM FLOATING DURING POUR.
REMOVE AND RETAIN TEMPORARY COVER AND SCREWS.
ROUTE CONDUITS TO BOX AS REQUIRED. GANG BRACKET
SCREWS MUST BE IN PLACE AND BOTTOMED TO ENSURE
SCREW VOIDS AFTER POUR. PLACE THIS INSTALLATION GUIDE
BACK INTO BOX, ALONG WITH ALL SUPPLIED ITEMS, AND
REINSTALL TEMPORARY COVER.
BOX INSTALLATION - STEP 2
SCREED TO TOP OF BOX SURFACE FOR 3/16" THICK
CARPET/FLOORING OR SPECIFIC HEIGHT TO ALLOW
FOR THICKER FINISHED FLOOR MATERIAL. HAND
TROWELING RECOMMENDED NEAR BOX EDGES.
BOX HAS NO HEIGHT ADJUSTMENT AFTER
CONCRETE POUR.
(4) #6-32 FLAT HEAD SCREW
CONCRETE SURFACE OR TOP
OF FINISHED FLOOR MATERIAL
Carpeted or Tile Floors, Cover types - BLP, BSQ, B, SLP, SSQ, S
TYPICAL INSTALLATION HEIGHTS
(4) LEVELING BOLT
FL-200 INSTALLATION INSTRUCTIONS
INSTALLED
ELECTRONIC
COMPONENT
GANG
MOUNTING
BRACKET
NON-CONFIGURABLE MOUNTING PLATE
INSTALLTING ELECTRONIC COMPONENTS
PULL WIRES AND CABLES TO BOX AS NECCESSARY (REMOVAL OF
GANG MOUNTING BRACKETS MAY BE REQUIRED). TERMINATE
WIRES AND CABLES TO ELECTRONIC COMPONENTS, AND INSTALL
ELECTRONIC COMPONENTS ONTO GANG MOUNTING BRACKETS.
REINSTALL TEMPORARY COVER IF FINISHED COVER IS TO BE
INSTALLED AT A LATER DATE.
NON-CONFIGURABLE MOUNTING PLATE,
DESIGNED TO UTILIZE ONLY DECORA
STYLE ELECTICAL COMPONENTS.
(2) #8-32 x .25 LG
PAN HEAD SCREW
TM
TEMPORARY COVER
COVER FLUSH WITH CONCRETE
FLOOR BOX TEMPORARY COVER WILL EITHER BE INSTALLED DIRECTLY ON THE BOX OR SHIMMED
BASED ON THE COVER AND FLOORING SPECIFICATIONS. SHIM KITS SOLD SEPARATELY (FL-200-CSK).
THE TEMPORARY COVER MAY NOT BE FLUSH WITH THE FINISH FLOOR IN ALL INSTALLATIONS.
CARPET FLOORING TILE OR LAMINATE FLOORING
SCREED FLUSH TEMPORARY
COVER
FLOOR BOX
CARPET COVER WITH
EDGING
FLOOR BOX
FINISHED
FLOOR COVER WITH
EDGING
FLOOR BOX
Vinyl or Stained Concrete, Cover types - SLD-ALUM, SLD-Color
COVER FLUSH WITH CONCRETE VINYL FLOORING STAINED FLOORING
SCREED FLUSH TEMPORARY
COVER
FLOOR BOX
FINISHED
FLOOR
SHIM 1/4"
COVER
FLOOR BOX
SHIM TO VINYL
THICKNESS
COVER
FLOOR BOX
Wood / Floating Wood, Cover types - BLP, BSQ, B, SLP, SSQ, S, SLD-ALUM, SLD-Color
COVER ABOVE CONCRETE WOOD FLOORING WOOD FLOORING COVER WITH
EDGING
FLOOR BOX
SLEEP SYSTEM (IF USED)
FINISHED FLOOR
COVER
FLOOR BOX
SLEEP SYSTEM (IF USED)
FINISHED FLOOR
FINISHED
FLOOR
TEMPORARY COVER
SHIM 1/4"
CONCRETE CONCRETE CONCRETE
CONCRETE CONCRETE CONCRETE
CONCRETE CONCRETE CONCRETE
.30 .30
.55
.55
.55 .30 .55
GANG DIVIDER ASSEMBLY
GANG MOUNTING PLATE
GANG MOUNTING BRACKET CONFIGURATION
PER CUSTOMER SPECIFICATIONS, CONFIGURE GANG MOUNTING BRACKETS AS SHOWN BELOW AND
REASSEMBLE INTO BOX (DECORA WALL PLATES SHOWN AS REFERENCE AND ARE NOT INCLUDED).
1-GANG / 1-GANG CONFIGURATION
2-GANG CONFIGURATION
OPTIONAL DIVIDER
DIVIDER HOLDER
GANG MOUNTING PLATE
DIVIDER HOLDER
GANG MOUNTING PLATE
DIVIDER ASSEMBLY
DIVIDER
HOLDER
DIVIDER
(2) #8-32 x .25 LG
PAN HEAD SCREW
(2) #8-32 x .25 LG
FLAT HEAD SCREW
GANG PLATE ASSEMBLY
(4) #8-32 x .25 LG
PAN HEAD SCREW
TM
  • Page 1 1
  • Page 2 2

FSR FL-200-SLD-ALU-C User manual

FSR
Brand
FSR
Model
FL-200-SLD-ALU-C
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents