Ledalite SilkSpace recessed Install Instructions

SilkSpace recessed
Ledalite
Brand
Ledalite
Model
SilkSpace recessed
Type
Install Instructions

This manual is also suitable for

Ledalite SilkSpace recessed is a versatile lighting solution designed for both standalone and continuous row installations. With its sleek profile and efficient design, it seamlessly integrates into various ceiling systems, including T-grids and drywall ceilings. Installation is simplified with pre-installed drivers and direct power feeds, reducing the need for complex wiring. The SilkSpace recessed offers flexible mounting options, allowing for easy integration into existing structures.

Ledalite SilkSpace recessed is a versatile lighting solution designed for both standalone and continuous row installations. With its sleek profile and efficient design, it seamlessly integrates into various ceiling systems, including T-grids and drywall ceilings. Installation is simplified with pre-installed drivers and direct power feeds, reducing the need for complex wiring. The SilkSpace recessed offers flexible mounting options, allowing for easy integration into existing structures.

www.ledalite.com
page10/30/2020 1
Recessed
ID-42
SilkSpace
Standalone Installation Instructions
Driver Driver
Every fixture contains its own driver
and receives a direct power feed.
Power feed
Driver
Prepare fixtures
Arrange boxed fixtures on the floor
in specified mounting locations;
remove fixtures from boxes.
Lay luminaire into T-grid. Bend mounting
tabs flush against outside of T-grid.
Install in ceiling grid
!
Handling Note
Remove from Packaging
Remove luminaire from packaging,
recycle box.
Lift using both hands from fixture
ends only.
Do not use cross-strap to lift fixture.
(2x4, 1x4)
1
2
3
Secure luminaire and Tie
off to structure
4
Secure luminaire to T-grid with self drilling
8x1/4” sheet metal screws (supplied by
others). Secure luminaire with grid wire or
suitable equivalent per local and national
building codes.
Remove pre-installed wire access plate.
Connect power feed to the leads
provided. Reinstall wire access plate.
Optional Flex Whip is prewired to the
fixture. Insert wire access plate into
wiring cavity. Complete electrical
connection at other end of whip in
accordance with local and national
building code.
Standalone wiring
5a
Flex Whip (Optional)
5b
www.ledalite.com
page10/30/2020 2
Recessed
ID-42
SilkSpace
Continuous Row Installation Instructions
Driver Driver
Every fixture contains its own driver
and receives a direct power feed.
Power feed
Driver
Prepare fixtures
Arrange boxed fixtures on the floor
in specified mounting locations;
remove fixtures from boxes.
Lay luminaire into T-grid. Bend mounting
tabs flush against outside of T-grid.
Install in ceiling grid
Remove from Packaging
Remove luminaire from packaging,
recycle box.
1
2
3
Secure luminaire and Tie off
to structure
4
Secure luminaire to T-grid with self drilling
8x1/4” sheet metal screws (supplied by
others). Secure luminaire with grid wire or
suitable equivalent per local and national
building codes.
Remove pre-installed wire access plate.
Connect power feed to the leads
provided. Reinstall wire access plate.
Optional Flex Whip is prewired to the
fixture. Insert wire access plate into
wiring cavity. Complete electrical
connection at other end of whip in
accordance with local and national
building code.
Remove driver top cover
Attach adjacent fixtures
5
6
!
Handling Note
Lift using both hands from fixture
ends only.
Do not use cross-strap to lift fixture.
(2x4, 1x4)
page
10/30/2020 3
www.ledalite.com
Fixtures size A B
2’x2’ 24 ⅝” (626mm) 24 ⅝” (626mm)
2’x4’ 24 ⅝” (626mm) 48 ⅝” (1235mm)
1’x4’ 12 ⅝” (321mm) 48 ⅝” (1235mm)
Mounting in a drywall ceiling
6
Drywall ceiling cut out
Cut a hole in the drywall with according to
the dimensions in the table above.
7
Installing mounting frame
Insert mounting frame into hole and secure
as shown in step 9.
8
Mounting options
Secure mounting frame by screwing to
wood frame or attaching hangar wires.
!
ATTENTION: Install in accordance with local and national building and electric codes.
Standalone Installation InstructionsID-33 & ID-42
  • Page 1 1
  • Page 2 2
  • Page 3 3

Ledalite SilkSpace recessed Install Instructions

SilkSpace recessed
Ledalite
Brand
Ledalite
Model
SilkSpace recessed
Type
Install Instructions
This manual is also suitable for

Ledalite SilkSpace recessed is a versatile lighting solution designed for both standalone and continuous row installations. With its sleek profile and efficient design, it seamlessly integrates into various ceiling systems, including T-grids and drywall ceilings. Installation is simplified with pre-installed drivers and direct power feeds, reducing the need for complex wiring. The SilkSpace recessed offers flexible mounting options, allowing for easy integration into existing structures.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents