York VRF Wall Mount Indoor Unit Installation guide

Installation Manual for Connector Cable

Model PCC-6A

No. Name Qty.

1 Connector Cable 1

2 Cable Band (For wrap up the cable) 2

1. Applicable Unit

This connector cable is used for connection between PSC-5RA connector (CN7) and indoor unit PCB

connector (CN17) for auxiliary heater installation.

2. Contents of Connector Cable

3. How to Use

Connect the connector cable as shown below.

Wrap up the excess cable using the cable band (accessory).

During installation, refer also to the “Installation and Maintenance Manual” for connecting indoor unit.

Wired Controller

CN17

PCB1

Indoor Unit

PCB1: Pins 3 and 4 of CN17

Connector Cable

(PCC-6A)

CN7

TB2

Relay and 3 Pin Connector Kit

(PSC-5RA)

Field Installation Side

(Out of Responsibility)

Code No. LIT-12012559

Issued July 2017

P5417017