York VRF EconoFresh Kit Indoor Unit Installation guide

Type
Installation guide
Installation Manual for Connector Cable to Indoor Unit
Model PCC-CN8-H
No. Name Qty.
1 Connector Cable 1
2 Cable Band (for securing the cable) 2
1. Applicable Unit
This connector cable is used for connection between PSC-5RA connector (CN7) and indoor unit PCB
connector (CN8) for auxiliary heater control.
2. Contents of Connector Cable
3. How to Use
Connect the connector cable as shown below.
Secure excess cable using the cable band (accessory).
During installation, refer also to the “Installation and Maintenance Manual” for connecting indoor unit.
Wired Controller
CN8
1
2
3
PCB1
Indoor Unit
1
2
3
1
2
3
Connector Cable
(PCC-CN8-H)
1
2
3
CN7
7
8
9
TB2
X1
X2
Relay and 3 Pin Connector Kit
(PSC-5RA)
Installer
’s Responsibility
PCB1:
Pins 1 and 2 of CN8
X1
X2
© 2018 Johnson Controls, Inc.
Code No. LIT-12013125
Issued August 2018
P5417081
  • Page 1 1

York VRF EconoFresh Kit Indoor Unit Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI