Page is loading ...
Teachers WorkPod Desk
MODEL# TWPD
1
the leg assembly(Part D1& D2) and align the two holes on the leg's mounting
plate with the two holes on the frame of the desk as illustrated below with the
#2. Be sure that the legs are protruding towards the outer edge of the desk.
Use two bolts(Part S-2) and two washers(Part X) to attach the leg assembly
in place.
sembly (Part D1&D2). Use two bolts(Part T) and two washers(Part X) to attach
panel with the leg assembly. It's important that the finished side of the mesh
panel is facing outwards.Use the provided allen key to tighten the bolts.
edge of the panel with the holes on the cross bar of the desk(Part C). Then align
the two holes on the short end of the mesh modesty panel(Part E) with the two
holes on the smaller mesh modesty panel(Part F). Use two bolts(Part T)and two
wshers(Part X)to attach them together
3
Dear Valued Customer,
Although extreme care goes into manufacturing and packing of this unit, mistakes are
possible. If you encounter any defects or you feel that something is missing, please call
our toll free customer service line at 1-800-261-4112 for courteous and immediate
resoluon to your problem.
Sincerely
Oklahoma Sound
Manufactures Warranty
P
g
g
g
MODEL # TWPL
Teachers WorkPod Lectern
A1 PC
Lectern Top
B-1 "L "
shaped Tube
Part 1 A
B-1
B-1
U-1
1
G
QP
H
I1
I1 PC
Bottom Panel
GLeft Panel 1 PC
H1 PC
Part 2
Q
Right Panel
Part List
No. Drawing Part Name Qty
Part No.
U-2
B-2
1 PC
B-2
2 PC
Cross Tube
O-2
S-1
3
K
2
2
3
J
J1 PC
Back Panel
K1 PC
Top Panel
S-1
S-1
Oklaoma
Sound
®
Dear Valued Customer,
Although extreme care goes into manufac
turing and packing of this unit, mistakes
are possible. If you encounter any defects
or you feel that something is missing,
please call our toll free customer service
line at 1-800-261-4112 for courteous and
immediate resoluon to your problem.
Sincerely
Oklahoma Sound
Manufactures Warranty
P
g
g
g
10
/
