NPS 82MS Assembly Instructions

82MS Assembly Instrucons

1) Remove bolt and

base cap from

boom of pole.

2) Insert pole protrusions

into base holes and place

base cap over protrusions.

4) Extend chrome tube

and insert into neck.

5) Tighten screw with

Philips screwdriver.

Tools Needed: Philips Screwdriver & 9/16” or 14mm Socket wrench

Naonal Public Seang / 149 Enn Road, Clion, New Jersey 07014 / Phone (973) 594-1100 / Fax (973) 594-1500

www.naonalpublicseang.com / Email: info@naonalpublicseang.com

Dear Valued Customer,

Thank you for your purchase. If you en-

counter any missing parts or diculty in

assembly etc., please call our toll-free cus-

tomer service line at 1-800-261-4112 for

courteous and immediate resoluon to

your problem.

Sincerely

Naonal Public Seang

3) Insert bolt/washer and

ghten using a socket

wrench.