National Public Seating BPFT-2472-20 Installation guide

Brand
National Public Seating
Model
BPFT-2472-20
Type
Installation guide

This manual is also suitable for

Dear Customer,
Thank you for your purchase. Although great care goes into the manufacturing and packaging of this product, mistakes are possible. If you
encounter any missing parts or have difficulty with assembly, please call our customer service Toll Free at 1.800.261.4112 for immediate and
courteous service.
Plastic Flip·n·Store Table
Assembly Instructions
Model BPFT-2460
www.nationalpublicseating.com
Parts List
BPFT-2460 Plastic Flip·n·Store Table
Assembly Instructions
Tabletop - 1pc.
A
Modesty Panel - 1pc.
B
C
Leg - 2 pcs.
Swivel Caster - 2 pcs.
1 3/4”
Socket Screw - 2 pcs.
Nut - 2 pcs.
1 5/8”
Socket Screw - 4 pcs.
4mm
Allen Wrench - 1pc.
5mm
Allen Wrench - 1pc.
Double Sided
Wrench - 2 pcs.
D
D1
E
F
G
Locking Swivel
Caster - 2 pcs.
H
I
J
Place tabletop (A) frame side up on a clean surface. Depress the lever on the tabletop locking
mechanism to release the lock. Align holes in legs (C) with holes in tabletop frame as shown in Fig. a
and secure with a 1 3/4” socket screw (E) and nut (F) on each side. (Ensure the elongated part for the legs are
positioned over the tabletop as shown.) Tighten with enclosed 5mm Allen wrench (I) and double sided wrench (J).
Step 1
Fig. a
Congratulations!
Your Flip·n·Store table is
now fully assembled!
Using enclosed 4mm Allen wrench (H), attach modesty panel (B) to legs with 4 socket screws (G). If
you want the modesty panel to be seen, then make sure that the cable channel is facing away from
the elongated part of the leg as shown in Fig. B. If you want it to be hidden, then face it in the
direction of the elongated part of the leg.
Attach 2 locking casters (D) to the front part of the legs and 2 non-locking casters (D1) to the rear part of the legs as
shown. Tighten with enclosed double sided wrench (J).
Step 2
Fig. B
Grasp the lever on either side of the tabletop and depress
to release lock and lift tabletop until it locks in the upright
position. To lower tabletop, depress lever to release lock and gently lower
tabletop until it locks in the down position.
1.800.261.4112
www.naonalpublicseang.com
To Operate:
  • Page 1 1
  • Page 2 2
  • Page 3 3

National Public Seating BPFT-2472-20 Installation guide

Brand
National Public Seating
Model
BPFT-2472-20
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents