Danfoss EVRS EVRST Installation guide

Type
Installation guide
Max. 150 °C (300 °F)
Warning
Never switch on
power to the
coil when the
coil is dismounted
from the valve.
Otherwise the coil
may be damaged
and there is risk of
injuries and burns.
Installation Guide
Solenoid Valve
Types EVRS 3 – 20 and EVRST 10 – 20
© Danfoss A/S (AC-MCI / jmn), 2012-12 DKRCC.PI.BP0.A2.02 / 520H6992 1
032R9513
032R9513
Refrigerants:
R744, R717, R22/R407C, R404A/R507, R410A, R134a,
R407A, R23.
For other refrigerants, please contact Danfoss.
Body material – stainless steel
1.4308 for EVRS 10, EVRS 15, EVRS 20
1.4301 for EVRS 3
a.c.~ a.c.~ a.c.~
a.c.~
Clip-on
On
O
Oil
New
Used
75 Nm ± 5 Nm
T = 50 Nm (37 ft-lbs)
T = 20 Nm (15 ft-lbs)
T = 30 Nm (22 ft-lbs)
10 W a.c.
t
max.
80 °C
(175 °F)
10 / 12 W a.c.
t
max.
80 °C
(175 °F)
20 W d.c.
t
max.
50 °C
(120 °F)
t
min.
- 40 °C
(-40 °F)
Min. medium temperature -40 °C (-40 °F)
Max. medium temperature 105 °C (221 °F)
Max. working
pressure PS/MWP
EVRS/T 3
EVRS/T 10
EVRS/T 15
50 barg / 725 psig
EVRS/T 20
28 barg / 406 psig for 032F3086 and 032F2237
50 barg / 725 psig for 032F5437 and 032F5438
Max. opening di. pressure:
Max. working pressure PS/MWP:
2 DKRCC.PI.BP0.A2.02 / 520H6992 © Danfoss A/S (AC-MCI / jmn), 2012-12
EVRS 3
EVRS 3
EVRS 10 – 20
EVRS 10 – 20
EVRST 10 – 20
EVRST 10 – 20
  • Page 1 1
  • Page 2 2

Danfoss EVRS EVRST Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI