Identifier GUID-84A89BCB-86AC-4BC8-B33F-4C3845748970
Version 2
Status Released
Setting up a PCoIP Card Host Dual/Quad
This section provides a quick overview of the host driver installation process on Dell Precision Tower 5810/7810/7910 and Rack 7910. For
more details, see the Teradici Support site.
Install the PCoIP host driver software from dell.com/support.
NOTE: You cannot upgrade the PCoIP host driver software while a VMware View-brokered PCoIP session is active
between a host workstation or host PC and VMware View client. Doing this will disable your mouse and keyboard when
driver software is removed.
To upgrade the PCoIP host driver sofware in this type of deployment, either:
• Connect to the host from a zero client
OR
• Upgrade the software while connected to the host through another desktop-remote protocol such as Remote Desktop Protocol
(RDP) or Virtual Network Console (VNC).
To install the PCoIP Host Driver Software on a Host PC:
1. Download the PCoIP host driver software from the Teradici Support site.
2. Log in to the administrative web interface for the host card.
3. From the Configuration > Host Driver Functionmenu, enable the Host Driverfunction.
4. Restart the host PC.
5. Install the PCoIP host software package appropriate to the operating system installed on the host PC. You can start the install process
by double-clicking the installer:
• - 32 bit: PCoipHostSoftware_x86-v3.3.20.msi (or later)
• - 64 bit: PCoipHostSoftware_x64-v3.3.20.msi (or later)
The welcome screen appears.
6. Click Next.
7. Accept the terms and conditions, and click Next.
8. Make sure the install location is correct, and click Next.
9. Click Install.
NOTE:
For Windows 7, when the driver is installed, a Windows Security dialog may appear. Click Install to continue
with the installation. To keep this dialog from appearing in the future, select Always trust software from Teradici
Corporation.
10. If prompted, restart the operating system, otherwise skip this step.
11. When restarted, the host driver software installation process continues when the OS boots up. Click Install to continue.
12. Click Finish to complete installation.
Identifier
GUID-5A8AA6B7-A6A9-408F-97DD-69CBFE9A3DFB
Version 6
Status Released
Finding More Information and Resources
See the safety and regulatory documents that shipped with your computer and the regulatory compliance website at www.dell.com/
regulatory_compliance for more information on:
• Safety best practices
• Regulatory certification
• Ergonomics
2
Setting up a PCoIP Card Host Dual/Quad
