Page is loading ...
Dell Precision Tower 5810/7810/7910 and
Rack 7910
Dual/Quad Host PCIe Cards Setup Guide
October 2020
Rev. A02
Topics:
•Installing the Dual/Quad Host Cards
Installing the Dual/Quad Host Cards
This section describes in brief on how to install the dual/quad host cards on a Dell Precision Tower 5810, 7810, 7910, and Rack
7910.
1. If you purchased a customer install kit, install the host card in a PCIe slot in your Dell Precision computer.
NOTE: The purchased customer install kit will be shipped with the host cards.
2. For instructions on how to install the host card and connect the two-wire cable (included in the kit), see the Owner’s Manual
for your computer at
www.dell.com/manuals
.
NOTE: To download the drivers for install, go to
www.dell.com/support.
Finding More Information and Resources
See the safety and regulatory documents that shipped with your computer and the regulatory compliance website at
www.dell.com/regulatory_compliance for more information on:
●Safety best practices
●Regulatory certification
●Ergonomics
See Dell.com for additional information on:
●Warranty
●Terms and Conditions (U.S. only)
●End User License Agreement
Additional information on your product is available at https://www.dell.com/support.
Copyright © 2014 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual
property laws. Dell™ and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions. All other marks
and names mentioned herein may be trademarks of their respective companies.
1
2
/