2. Toro
  3. Receiver Hitch Kit, Workman 1100/2100/2110 and Twister 1400/1600 Utility Vehicle

Toro Receiver Hitch Kit, Workman 1100/2100/2110 and Twister 1400/1600 Utility Vehicle Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Receiver Hitch Kit, Workman 1100/2100/2110 and Twister 1400/1600 Utility Vehicle Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3433-840RevA
ReceiverHitchKit
Workman
®
1100/2100/2110andTwister
®
1400/1600UtilityVehicle
ModelNo.07278
ModelNo.07278R
InstallationInstructions
Safety
SafetyandInstructional
Decals
Safetydecalsandinstructionsare
easilyvisibletotheoperatorandare
locatednearanyareaofpotential
danger.Replaceanydecalthatis
damagedormissing.
decal140-2500
140-2500
1.ForWorkman2100,
1100,andTwister
1400—maximumtongue
weightis45kg(100lb)
3.ForWorkmanMD
series,2110,andTwister
1600—maximumtongue
weightis45kg(100lb)
2.ForWorkman2100,
1100,andTwister
1400—maximumtrailer
weightis363kg(800lb)
4.ForWorkmanMD
series,2110,andTwister
1600—maximumtrailer
weightis544kg(1,200lb)
Installation
InstallingtheReceiver
Hitch
ForWorkman1100,2100,and
2110andTwister1400and1600
Machines
1.Removetheexistinghitchfromtherearframe.
2.Attachthereceiverhitchtotherearframewith4
ange-headboltsandangenuts(Figure1).
g296023
Figure1
1.Receiverhitch3.Flange-headbolt
2.Drillahole(3/8inch)
hereusingthehitchasa
templateifaholeisnot
present.
4.Flangenut
Note:A2-inchx2-inchstandardballmountisnot
includedwiththiskit.Youcanpurchaseaballmount
atahitchdealerorautomotivepartsstore.
©2019—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3433-840*A
ForWorkmanMD/MDXMachines
1.Removetheexistinghitchfromtherearswing
arm.
2.Attachthereceiverhitchtotherearswingarm
with5ange-headboltsandangenuts(Figure
2).
g295439
Figure2
1.Receiverhitchassembly3.Flange-headbolt
2.Drillahole(3/8inch)
hereusingthehitchasa
templateifaholeisnot
present.
4.Flangenut
Note:A2-inchx2-inchstandardballmountisnot
includedwiththiskit.Youcanpurchaseaballmount
atahitchdealerorautomotivepartsstore.
Operation
AvoidingHitchInterference
Becauseballmountsvaryindesignandshape,
removethemfromthereceiverbeforeliftingthecargo
bedtoavoidpossibleinterference.
Atailgatelanyardkitforavoidingcontactwiththe
hitchisavailable.
2
/