Extron Retractor SM Series Owner's manual

Extron
Brand
Extron
Model
Retractor SM Series
Type
Owner's manual
Retractor SM Cable Cubby Mount - Triple •
Installation Guide
The Retractor SM modules require this mounting bracket for installation in a Cable
Cubby 500 or Cable Cubby 700 enclosure. Each bracket installs up to three modules.
See the Cable Cubby 500 and 700 Installation Guide for the enclosure installation and
see the Retractor SM Installation Guide for Retractor installation. Both are available at
www.extron.com.
Place the Retractor Trim in
the mounting position.
[Slide clamp not shown for clarity]
Secure the Retractors with
the included pin and clip.
5
1
Pin
Retractor Trim
(included with the
Cable Cubby enclosure)
Triple
Bracket
Clip
Cable Cubby 500
NOTE: The bracket tab must be
located inside the trim.
Push the bracket up into
the enclosure and against
the trim.
3
4
A
lign the bracket mounting
holes with the enclosur
e holes
and secur
e with the included
scr
ews and washers (3 places).
Secure the trim using the
provided mounting scr
ews (2 places).
2
68-2735-01
Rev. A
12 14
Extron Headquarters
+1.800.633.9876 (Inside USA/Canada Only)
Extron Asia
+65.6383.4400
Extron China
+86.21.3760.1568
Extron Korea
+82.2.3444.1571
Extron Europe
+31.33.453.4040
Extron Japan
+81.3.3511.7655
Extron Middle East
+971.4.299.1800
Extron India
+91.80.3055.3777
© 2014 Extron Electronics — All rights reserved. All trademarks mentioned are the property of their respective owners. www.extron.com
  • Page 1 1

Extron Retractor SM Series Owner's manual

Extron
Brand
Extron
Model
Retractor SM Series
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents