Bolens 11A-074F265 Quick start guide

Bolens
Brand
Bolens
Model
11A-074F265
Type
Quick start guide

This manual is also suitable for

IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Read and understand all instruction, warning, and danger labels.
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
Lea el manual de operación anexo sobre ensamblaje e inicio.
Remove retainer clip from chute deector.
Lift handle to extended position. Tighten star knobs.
1
2
Starter
Rope
Blade Control Handle
Star Knobs
Chute
Deector
Tools Required for Assembly: A set
of adjustable wrenches or individual
wrenches of the following sizes:
9/16-inch and 3/4-inch
Secure rear wheels to deck as shown. Be sure to
place cupped side of washer against deck.
Secure front wheels in same manner.
B
C
A
A
C
D
B
Hold blade control handle against upper handle.
Slowly slip starter rope into rope guide.
Tighten rope guide wing knob.
Secure cable to lower handle with
cable tie provided.
3
4
778-10716D
© 2006
11A-074E065
11A-074F265
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Read and understand all instruction, warning, and danger labels.
Need Help?
Call 1-888-TO-HELP-U
Lea el manual de operación anexo sobre ensamblaje e inicio.
Depress blade control handle and hold.
Pull starter rope with quick, full arm stroke.
If engine does not start after ve pulls,
repeat steps 7 through 9.
9
8
Fill tank with gas to within 1/2 inch of top of tank.
Fill engine with entire contents of oil bottle supplied
with your mower.
5
6
Push primer ve times.
7
Gas Cap
Oil Fill
Primer
  • Page 1 1
  • Page 2 2

Bolens 11A-074F265 Quick start guide

Bolens
Brand
Bolens
Model
11A-074F265
Type
Quick start guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents