CJ TECH 24944-DI User manual

Type
User manual

CJ TECH 24944-DI is a versatile charging station that offers multiple charging options for your devices, including smartphones, Apple Watch, and AirPods. It features 5W, 10W, and 15W wireless charging modes, allowing you to charge your devices quickly and efficiently. The collapsible smartphone holder can be adjusted to accommodate different phone sizes and can be used as a stand or a pad. Additionally, the built-in lamp provides three different lighting colors to suit your preference.

CJ TECH 24944-DI is a versatile charging station that offers multiple charging options for your devices, including smartphones, Apple Watch, and AirPods. It features 5W, 10W, and 15W wireless charging modes, allowing you to charge your devices quickly and efficiently. The collapsible smartphone holder can be adjusted to accommodate different phone sizes and can be used as a stand or a pad. Additionally, the built-in lamp provides three different lighting colors to suit your preference.

4-in-1
Fast Wireless
Charging Station
WITH LAMP
15 WATT
User Manual
ITEM 24944-DI & 24946-DI
POWER & CHARGING
This Fast Wireless Charging Desktop Station with Lamp can charge your
Qi enabled smartphone at 5 Watt charging speeds and also FAST charge
at 10 Watt and 15 Watt speeds. For FAST charging (10 and 15 Watts)
there is nothing to select on the charger as different phone brands will
accommodate different fast charging speeds automatically.
In order to achieve FAST charging speeds (10 Watt or 15 Watt) you will
require a QC3.0 adapter (not included), additional info provided below.
1) SMARTPHONE 5-WATT WIRELESS CHARGING:
Using the included charging cable, connect the end with the Type-C
connection into the Fast Wireless Charging Desktop Station with Lamp
and the other end to a USB Power Source 5V and up to 2.4 Amps (not
included). Place your Qi enabled device in the center of the charging
stand, when placed correctly the LED light will change from red to green
indicating the Qi enabled device is charging. You will also see the
charging icon on your phone appear.
2) SMARTPHONE 10-WATT AND 15-WATT FAST WIRELESS CHARGING:
Using the included charging cable, connect the end with Type C
connection into the Fast Wireless Charging Desktop Station with Lamp
and the other end into a QC 3.0 wall charger (not included). QC 3.0 is a
rapid wall charger that will enable the fast-charging features on this unit
of 10 Watt or 15 Watt. Place your Qi-enabled devices in the center of the
charging stand, when correctly placed the LED light on the charger will
change from red to green indicating the Qi enabled device is charging.
You will also see the charging icon on your phone appear.
3) APPLE WATCH® WIRELESS CHARGING:
After your charging station is connected to power, place your Apple
Watch® on the top wireless charger and your watch will start to charge
wirelessly.
4) AIRPODS® & QI ENABLED TRUE WIRELESS EARBUDS CHARGING:
After your charging station is connected to power, place your Airpods®
or Qi enabled True Wireless Earbuds in the center of the wireless
charging pad in the middle of the device. When placed correctly on the
charging pad the LED light in the front will change from red to purple
indicating the earbuds are charging.
5) LAMP CONTROLS:
After your charging station is connected to power you can adjust the
light color/brightness between three different settings. Touch the Light
icon to adjust the lamp color/brightness between warm, cold and
subdued light or to turn it OFF.
PACKAGE CONTENTS
1* Fast Wireless Charging Desktop Station with Lamp
1* Type-C Charging Cable
NOTE
Do not place other materials like metal objects, magnets, magnetic
stripe cards between the mobile device and the wireless charger pad.
Check your mobile device’s battery percentage by referring to the
charging icon on your phone.
When the mobile device is not placed on the charging surface
accurately, your mobile device may not charge properly.
Please do not expose this device to moisture or heat sources.
This is not a toy and therefor keep away from children.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference,
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party
responsible for compliance. such modifications could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.
and any use of such marks by CJ Global is under license. Other trademarks and trade names are
those of their respective owners.
Thank you for purchasing the 4-in-1 Fast Wireless Charging Station
with Lamp. This all-in-one device allows you to charge up to three
devices at one time without the hassle of messy charging cables.
The collapsible smartphone holder can be converted from a wireless
charging stand to a wireless charging pad. In addition, the built-in
lamp provides three different colors of lighting to select from for the
perfect amount of light for your workspace or night table.
DEVICE LAYOUT
Apple Watch and AirPods are trademarks of Apple Inc., registered in the U.S.
and other countries and regions.
Compatible with:
Apple Watch® and AirPods®
Flexible Lamp Neck LED Lights
Lamp Touch
Switch
Non-Slip Mat
Air Vent
Collapsible
Apple Watch®
Wireless Charger
Indicator LED Light
Smartphone
Wireless
Charging
Stand
Qi enabled
Earbud
Charging Pad
PRODUCT SPECIFICATIONS
• Wireless Output: 5 Watt, 10 Watt and 15 Watt
• Input Power: 30W(For Wireless charger+Lamp)
• Input Voltage: 9V/3A,12V/2.5A
Charging Efficiency: 70%-80%
FRONT
BACK
24944/46-DI - MANUAL 4-in-1 Fast Wireless Charging Station with Lamp
CLOSED: 11 x 18 cm / OPEN: 22 x 18 cm
  • Page 1 1

CJ TECH 24944-DI User manual

Type
User manual

CJ TECH 24944-DI is a versatile charging station that offers multiple charging options for your devices, including smartphones, Apple Watch, and AirPods. It features 5W, 10W, and 15W wireless charging modes, allowing you to charge your devices quickly and efficiently. The collapsible smartphone holder can be adjusted to accommodate different phone sizes and can be used as a stand or a pad. Additionally, the built-in lamp provides three different lighting colors to suit your preference.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI