Shenzhen 2AW9R WIRELESS CHARGING PAD User manual

Shenzhen
Brand
Shenzhen
Model
2AW9R WIRELESS CHARGING PAD
Type
User manual

Shenzhen 2AW9R WIRELESS CHARGING PAD

The Shenzhen 2AW9R WIRELESS CHARGING PAD is a convenient and efficient way to charge your Qi-enabled devices. With its compact size and sleek design, it's perfect for use at home, in the office, or on the go.

Simply place your device on the center of the charging pad and the LED indicator will turn green to indicate that charging has begun. The pad supports fast charging for devices that support 10W input, and standard charging for Qi-enabled devices like the iPhone 8 and iPhone X.

For optimal performance, it's recommended to remove your phone case while charging. The charging pad also features a built-in fan to prevent overheating and ensure safe and reliable charging.

Shenzhen 2AW9R WIRELESS CHARGING PAD

The Shenzhen 2AW9R WIRELESS CHARGING PAD is a convenient and efficient way to charge your Qi-enabled devices. With its compact size and sleek design, it's perfect for use at home, in the office, or on the go.

Simply place your device on the center of the charging pad and the LED indicator will turn green to indicate that charging has begun. The pad supports fast charging for devices that support 10W input, and standard charging for Qi-enabled devices like the iPhone 8 and iPhone X.

For optimal performance, it's recommended to remove your phone case while charging. The charging pad also features a built-in fan to prevent overheating and ensure safe and reliable charging.

Thanks for choosing Mobile To Go!
This Fast Wireless Charging Pad allows you to enjoy the
freedom and convenience of wireless charging. Simply place
your phone on the center of the pad to begin charging.
Please read this manual before using the device to ensure
safe and proper use.
Getting Started
Package Contents
• Wireless Charger
• Charging Cable
Wireless charging covers and chargers sold separately.
Using the Wireless Charger Specifications
Indicator Light Identification:
Color Status
Solid Amber Standby
Solid Green Charging
60343073621
Wireless
Charging Pad
User Manual
Device Layout:
1. Connect the micro cable (included) to the charging pad and your charger adapter
(not included). When the LED lights up amber it is ready for charging.
2. Place your phone down on the center of the charging pad.
3. When the phone is properly aligned, the LED light will change to green.
Your phone is now charging.
Notes:
1. Fast charge mode is compatible with any phone that can receive 10W input.
2. Standard Qi enabled devices will charge at a standard speed, such as iPhone
8/8plus, iPhone X.
3. Phones without standard Qi function need an additional Qi wireless receiver
(not included). It is normal for your phone to get warm during the charging process,
removing a phone case is recommended while charging.
Output: 5V/2A,9V/1.1A MAX
Conversion: >72%
Input: 5V/2A;9V/1.8A
Receiving distance: 4~10mm
Frequency: 113.14-145.99KHz
Size: 100*100mm N.W.: 81g
Do not squeeze or collide with other items.
Do not disassemble or throw into fire or water, to avoid causing a short
circuit leakage.
Do not use wireless charger in severely hot, wet, or corrosive
environments, to avoid circuit damage and leakage phenomenon.
Do not place close to magnetic strip or chip card (ID card,
bank cards, etc.) to avoid magnetic failure.
Please keep an 8-inch distance between embedding medical devices
(pacemakers, embedding cochlear, etc.) and the wireless charger, to
avoid potential interference with the medical device.
Do not block charging fan on bottom of the wireless charger.
Please advise children this charger is not a toy.
Do not place materials such as metals, magnets, or magnetic
stripes between the mobile device and the wireless charger.
LED indicator area
Input port of power supply
00000
CERTIFIED
Can cause damage to the device
Can cause bodily hard to user or another person.
FCC Statement
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions (1)this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with minimum distance 20cm between the radiator &
your body.
  • Page 1 1

Shenzhen 2AW9R WIRELESS CHARGING PAD User manual

Shenzhen
Brand
Shenzhen
Model
2AW9R WIRELESS CHARGING PAD
Type
User manual

Shenzhen 2AW9R WIRELESS CHARGING PAD

The Shenzhen 2AW9R WIRELESS CHARGING PAD is a convenient and efficient way to charge your Qi-enabled devices. With its compact size and sleek design, it's perfect for use at home, in the office, or on the go.

Simply place your device on the center of the charging pad and the LED indicator will turn green to indicate that charging has begun. The pad supports fast charging for devices that support 10W input, and standard charging for Qi-enabled devices like the iPhone 8 and iPhone X.

For optimal performance, it's recommended to remove your phone case while charging. The charging pad also features a built-in fan to prevent overheating and ensure safe and reliable charging.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents