Shenzhen Itian Technology U8A User manual

Brand: Shenzhen Itian Technology

Model: U8A

Type: User manual

Shenzhen Itian Technology U8A is a magnetic wireless charger compatible with Apple Watch Series Ultra, 1-8. Featuring a compact and lightweight design, it effortlessly charges your Apple Watch using any powered USB-C or USB-A adapter. Simply place your Apple Watch face up on the wireless charging dock, and it will automatically start charging. The magnetic adsorption holds your watch securely in place, ensuring efficient and uninterrupted charging.

User Manual

Fast Wireless Charger

U8A

Thank you for choosing our product. Please read the instructions carefully before using

Product information

Made for Apple Watch Series Ultra, 8,7,6 5,4,3,2 and 1

Features

Charge the Apple Watch using a USB-C or USB-A adapter

Magnetic adsorption holds the Apple Watch firmly in place while charging

Production instructions

1. Plug the Apple Watch wireless charger into any powered USB-C or USB-A adapter.

2. Place your Apple Watch face up on the wireless charging dock

3. Your Apple Watch will light up and automatically start charging

Wireless charging area

4. Remove your Apple Watch from the module when fully charged

Specifications

Size: 67*33*8.7mm

Weight: 18g

Material: ABS + Metal

Input: 5V/500mA 5V/1000mA

Output: 3W (Max)

Input interface: USB-C + USB-A

Compatibility: Apple Watch Series

Warning

1. Do not dismantle or modify the product

2. Do not store product in wet conditions

3. Do not let water inside part of the product’s interface, this would cause harm to the charger

4. While charging, the charger may heat up. This is normal and should not affect the charger’s

performance. If the charger feels hot to touch during the charging process, remove the

device from the charger and allow it to cool down before restarting the charging process.

Any changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy, and if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

–Reorient or relocate the receiving antenna.

–Increase the separation between the equipment and receiver.

–Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

–Consult the dealer or an experienced radio/TV technician for help.

Shenzhen Itian Technology U8A User manual

Shenzhen Itian Technology U8A User manual

Shenzhen Itian Technology U8A User manual

Other documents