Deagostini Ford GT User guide

10

STAGE PAGE

36 Left lateral reinforcements 146

37 Chassis front 149

38 Main chassis 151

39 Rear chassis frame 154

40 Central rear chassis frame 157

Published in the UK by De Agostini UK Ltd, Royds Withy King, 65 Carter Lane, London EC4V 5EQ.

Published in the USA by De Agostini Publishing USA, Inc., 299 Park Avenue • New York, New York 10171.

Warning: Not suitable for children under the age of 14.

is product is not a toy and is not designed or intended for use in play.

Items may vary from those shown.

146

FORD GT

Stage 36:

Left lateral reinforcements

YOUR PARTS

36-A

36-B

36-A Left lateral reinforcements

(5 pieces)

36-B Left lateral reinforcement

(1 piece)

36-C FP02 screw 1.8 x 4mm

FP02

STEP BY STEP

147

STEP 36-1

Place the left lateral reinforcement (36B)

in the position shown on the underside

of the oor. Engage the pin with the

corresponding hole in the oor and

secure with an FP02 screw.

STEP 36-3

Pass cable 06 (35A) through

the gap between the fourth

and fth reinforcements and

lead it through to the front.

STEP 36-2

Repeat this process to x the left

lateral reinforcements (36A) to the

oor with FP02 screws.

FP02

35-A

36-A

36-B

148

FORD GT

STEP 36-4

Pass cable 07 (35B) under the

reinforcements on the right

side to the front.

STAGE COMPLETE

35-B

35-B 34-B

STEP BY STEP

149

37-A Chassis front

Stage 37:

Chassis front

YOUR PARTS

37-A

150

FORD GT

STEP 37-1

Keep the chassis front

(37A) supplied with this

stage to one side for

future use.

STEP BY STEP

151

Stage 38: Main chassis

38-A Main chassis

38-B Screw FD01 2.3 x 4mm

YOUR PARTS

38-A

FD01

152

FORD GT

STEP 38-1

Collect the chassis front (37A) supplied with the

previous stage to the main chassis (38A). Line up

the four holes with the four corresponding posts.

STEP 38-2

Press the four holes onto

the posts, as shown.

STEP 38-3

Use three FD01 screws to x the two parts of the chassis together (circled). Leave the protruding posts free.

38-A

37-A

FD01

STEP BY STEP

153

STAGE COMPLETE

154

FORD GT

39-A Rear chassis frame

39-B Screw FD01 2.3 x 4mm

Stage 39:

Rear chassis frame

YOUR PARTS

39-A

FD01

STEP BY STEP

155

STEP 39-1

Retrieve the chassis

assembly from the

previous stage.

STEP 39-3

Engage the holes of the

chassis frame with those

of the chassis.

STEP 39-2

Align the holes of the

rear chassis frame (39A)

with the corresponding

holes in the rear section

of the chassis.

38-A

39-A

156

FORD GT

STEP 39-4

Secure the frame

with two FD01

screws, as indicated.

STAGE COMPLETE

38-A

39-A

FD01

STEP BY STEP

157

40-A Central rear chassis frame

40-B Screw FD01 2.3 x 4mm

YOUR PARTS

40-A

FD01

Stage 40:

Central rear chassis frame

158

FORD GT

STEP 40-1

Prepare the chassis

assembly from the

previous stage.

STEP 40-3

Once the back is

aligned, lower the

holes at the front

onto the posts on the

chassis (circled).

STEP 40-2

Align the cutouts at the

back of the central rear

chassis frame (40A) with

the tabs at the front of

the rear chassis frame,

as shown.

40-A

39-A

38-A

40-A

STEP BY STEP

159

STEP 40-4

Secure the central rear

chassis frame with ve

FD01 screws.

STAGE

COMPLETE

FD0140-A

38-A

Deagostini Ford GT User guide

Deagostini Ford GT User guide

Related papers

Other documents