2. Pima
  3. Technician Keypad

Pima Technician Keypad Installation guide

  • Hello, I've reviewed the installation guide for the PIMA Technician Keypad 8410062, as well as Keypads RX-410, RX-150, RX-160 and RX-406. This document provides information on connecting the keypad using its included TC-3 cable kit, with RJ-11, Terminal, and Molex adapter options. It also includes some important notes on using the keypad with different PIMA models. I'm ready to answer any questions you have about its features or usage.
  • What is the purpose of the Technician Keypad?
    What is included with the Technician Keypad?
    What connections are available with the TC-3 cable?
    Can I use two types of connections at the same time?
    Can I connect the RJ-11 connector to the RJ-11 port on LCD keypads?
PIMA Electronic Systems Ltd.
5 Hatzoref Street, Holon 58856, Israel
℡
+972-3-6506414
+972-3-5500442
support@pima-alarms.com
http://www.pima-alarms.com
General Information
PIMA’s new Technician Keypad (P/N 8410062) is
an easy-to-use all-in-one technician tool,
designed to make field programming of all PIMA
panels user-friendly and error free.
The keypad includes a TC-3 Cable kit, allows you
to program any of PIMA systems on all locations
regardless system configuration (i.e., with or
without keypad) in minutes.
The TC-3 Cable is directly attached to the keypad
and can be connected directly to the panel, other
keypad, or to the keypads' BUS (i.e., SecuBUS™).
Connections
The connected cable comes with three adapters
to fit any installation configuration:
RJ-11:
Connection to LED keypads ONLY!
(marked “B1” in figure 1).
Terminal Connection:
Connection to any
terminal block on the keypads' BUS, i.e.,
SecuBUS™ (marked “B2” in figure 1).
Molex:
Fast connection to panels’ JP2 (marked
“B3” in figure 1).
Technician Keypad
IMPORTANT!
1. Do not use two types of connections
simultaneously.
2. Do not connect the RJ-11 connector (B1)
to the RJ-11 port on LCD keypads.
3.
To connect to the RJ-11 in RX-406, the
keypad cover should be removed.
NOTE:
To use the TC-3 cable with an older
version of RX-150/160 keypads, connect
the wires according to the color scheme in
figure 2.
Technician Keypad
Figure 2
Connecting TC-3 to
keypads with Wire
Connection (Older
Version)
Figure 1
Connections to
keypads
P/N 4410222 A1
XX en (Oct 2009)
PIMA Electronic Systems Ltd.
5 Hatzoref Street, Holon 58856, Israel
℡
+972-3-6506414
+972-3-5500442
support@pima-alarms.com
http://www.pima-alarms.com
General Information
PIMA’s new Technician Keypad (P/N 8410062) is
an easy-to-use all-in-one technician tool,
designed to make field programming of all PIMA
panels user-friendly and error free.
The keypad includes a TC-3 Cable kit, allows you
to program any of PIMA systems on all locations
regardless system configuration (i.e., with or
without keypad) in minutes.
The TC-3 Cable is directly attached to the keypad
and can be connected directly to the panel, other
keypad, or to the keypads' BUS (i.e., SecuBUS™).
Connections
The connected cable comes with three adapters
to fit any installation configuration:
RJ-11:
Connection to LED keypads ONLY!
(marked “B1” in figure 1).
Terminal Connection:
Connection to any
terminal block on the keypads' BUS, i.e.,
SecuBUS™ (marked “B2” in figure 1).
Molex:
Fast connection to panels’ JP2 (marked
“B3” in figure 1).
Technician Keypad
IMPORTANT!
1. Do not use two types of connections
simultaneously.
2. Do not connect the RJ-11 connector (B1)
to the RJ-11 port on LCD keypads.
3.
To connect to the RJ-11 in RX-406, the
keypad cover should be removed.
NOTE:
To use the TC-3 cable with an older
version of RX-150/160 keypads, connect
the wires according to the color scheme in
figure 2.
Technician Keypad
Figure 2
Connecting TC-3 to
keypads with Wire
Connection (Older
Version)
Figure 1
Connections to
keypads
P/N 4410222 A1
XX en (Oct 2009)
/