Sapling Transformer Installation guide

Transformer
Sapling
Brand
Sapling
Model
Transformer
Type
Installation guide
Transformer
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
215.322.6063 P.
215.322.8498 F.
www.sapling-inc.com
Installation Manual V3
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
215.322.6063 P.
215.322.8498 F.
www.sapling-inc.com
2
Table of Contents
Installation Instructions
Installing the Transformer 3
Transformer
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
215.322.6063 P.
215.322.8498 F.
www.sapling-inc.com
3
1. Place the transformer in the desired position (inside rack or on wall).
2. Using the existing holes on the transformer, mark the location of the holes on the mounting surface. Remove transformer
and drill.
3. Securely fasten the transformer to the mounting surface with machine screws or nuts and bolts.
4. Connect 110V neutral input to wires H1 and H3. (see diagram above)
5. Connect power input to wires H2 and H4. (see diagram above)
6. Connect transformer output wire # X4 for 24V neutral
7. Connect transformer output wire # X1 for 24V power
8. Connect transformer wires X2 and X3 together with wire nuts.
Installation Instructions
Installation the Transformer
  • Page 1 1
  • Page 2 2
  • Page 3 3

Sapling Transformer Installation guide

Transformer
Sapling
Brand
Sapling
Model
Transformer
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents