Southern Enterprises MS904800TX User manual

Brand: Southern Enterprises

Model: MS904800TX

Type: User manual

This manual is also suitable for

For assistance with assembly contact:

Southern Enterprises Inc.

Customer Service 1-800-633-5096

[email protected]

www.seidal.com

MS904700TX/4800TX

TV Media Stand-

Cullerton Black/

Off White

Care and Cleaning Instructions:

Before using, wipe with a clean , dry cloth.

Periodically apply furniture wax to renew

The nish. Avoid rubbing or scratching the

surface with rough or abrasive objects.

For replacement parts or questions, please

call Customer Service at 1-800-633-5096.

Do not return product to store. Please call

manufacturer for assistance, questions or

parts.

MS904700TX/4800TX

TV Media Stand- Cullerton Black/ Off White

Assembly Instructions

Please review all parts and hardware before disposing of any packaging.

Call Customer Service if missing hardware. Do not return to store/retailer.

Using a screw that is too long will cause damage.

Before beginning assembly, separate each type of screw. Carefully study

the screw diagrams below. You may receive extra hardware with your unit.

※

MAX. LOADING CAPACITY IS 175 LBS FOR TOP PANEL, 20 LBS FOR FIXED SHELF,

15 LBS PER ADJUSTABLE SHELF.

Wood Dowel

∅

6mmx25mm

Cam Lock

∅

15mmx9mm

Metal Plate

16mmx10mm

Cam Lock Dowel

∅

6.2mmx32mm

Screw

∅

3mmx16mm

Knob Bolt

∅

4mmx16mm

Screw

∅

3mmx14mm

∅

6mmx19mm

Screw

∅

4mmx25.4mm

Knob

∅

27mmx24mm

Quantity

Of 27

Quantity

Of 20

Quantity

Of 7

Quantity

Of 20

Quantity

Of 31

Quantity

Of 3

Quantity

Of 12

Quantity

Of 8

Quantity

Of 8

Quantity

Of 3

Tool required: Phillips screw driver

(Not Included)

For assistance with assembly contact:

Southern Enterprises Inc.

Customer Service 1-800-633-5096

[email protected]

www.seidal.com

CAM LOCK INSTRUCTION:

THIS ITEM IS ASSEMBLED WITH CAM LOCK SET.

--SCREW CAM LOCK DOWEL INTO PANEL II.

--INSERT CAM LOCK INTO PRE-DRILLED HOLE IN PANEL I, AND

--ROTATE CAM LOCK UNTIL ARROW IS IN LINE WITH HOLE ON PANEL EDGE.

--ALIGN CAM LOCK DOWEL TO CAM LOCK HOLE ON PANEL I, AND PRESS

PANELS I & II TOGETHER.

--LOCK PANELS TOGETHER BY TURNING CAM LOCK CLOCKWISE UNTIL

TIGHT.

NOTE :

FOLLOW INSTRUCTIONS LISTED BELOW IN THE PROPER SEQUENCE AS NUMBERED TO ASSURE

FAST, EASY AND CORRECT ASSEMBLY. HOUSE HOLD GLUE SUGGESTED FOR WOOD DOWEL.(eg.

ELMERS GLUE, NOT PROVIDED).SOLID ARROW MARK POINTS AT FRONT SIDE OR UP DIRECTION.

PHILLIP SCREW DRIVER IS REQUIRED(NOT PROVIDED).TWO PERSONS ARE RECOMMENDED TO

ASSEMBLE THIS ITEM.

CAM LOCK

CAM LOCK DOWEL

PANEL EDGE

PANEL II

PANEL I

CAM LOCK INSTRUCTION

PARTS LIST:

NO DESCRIPTION QTY NO DESCRIPTION QTY

Bottom Panel

1 J

Right Side Back Panel

Base Support

1 K

Center Upper Back Panel

Middle Left Panel

1 L

Center Lower Back Panel

Middle Right Panel

1 M

Left Side Panel

Center divider

1 N

Adjustable shelf

Left Side Panel

1 O

Left Glass Door

Right Side Panel

1 P

Center Wooden Door

Top Panel

1 Q

Right Glass Door

Front cross Brace

MS904700TX/4800TX

TV Media Stand-

Cullerton Black/

Off White

Step 1:

Insert wood dowels (a) into

the bottom base (A). Join

the base support (B) and the

bottom base (A) with screws

Step 2:

Insert cam lock dowels (b)

to the bottom panel (A),

also the middle left and right

panels (C) and (D) as shown

in Figure 1.

Customer Service 1-800-633-5096

[email protected]

Southern Enterprises, Inc.

600 Freeport Pkwy Ste: 200

Coppell, Texas 75019

Figure 1

MS904700TX/4800TX

TV Media Stand- Cullerton Black/ Off White

Assembly Instructions

Step 1:

Assemble the middle left

and right panels (C) and

(D) and the center divider

(E) using wood dowels (a).

Tighten cam lock dowels (b)

with cam locks (d) from the

pre-drilled hole as shown in

Figure 2.

Step 2:

Assemble middle and side

panels (F) (C) (D) and (G)

with bottom panel (A) using

wood dowels (a), and tighten

cam lock dowel (b) with cam

lock (d) from the pre-drilled

hole as shown in Figure 2.

Figure 2

MS904700TX/4800TX

TV Media Stand- Cullerton Black/ Off White

Assembly Instructions

Step 1:

Join the front cross brace (I)

to the top panel (H) using

wood dowels (a), and tighten

using screws (c). Insert cam

lock dowels (b) into the top

panel (H) as shown in Figure

Step 2:

Join the top panel (H) to

the assembly from Figure

2 using wood dowels, and

tighten cam lock dowels (b)

with cam locks (d) from the

pre-drilled holes as shown in

Figure 3.

Figure 3

MS904700TX/4800TX

TV Media Stand- Cullerton Black/ Off White

Assembly Instructions

Step 1:

Tighten the back panels (K)

(L) (M) (J) to the assembly

using screws (e) through the

metal plate (f) as shown in

Figure 4.

Figure 4

MS904700TX/4800TX

TV Media Stand- Cullerton Black/ Off White

Assembly Instructions

Step 1:

Insert the pins (g) at the

desired position and place

the adjustable shelves (N)

above the pins as shown in

Figure 5.

Step 2:

Tighten the door panels (O)

(P) and (Q) to the assembly

using screws (j) through the

pre-xed hinges.

Step 3:

Tighten knobs (g) to the door

panels (O) and (Q) using

knob bolts (i) through the

pre-drilled holes.

Figure 5

MS904700TX/4800TX

TV Media Stand- Cullerton Black/ Off White

Assembly Instructions

CAUTION

The top shelf is intended for a at screen television with a maximum

overall width of 50” and supports up to 175 lb.

The top shelf is NOT INTENDED for tube televisions.

Each center shelf should not be loaded with more than 20 lb. Each side

shelf should not be loaded with more than 15 lb.

DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the

maximum sizes and weights indicated may result in instability causing

possible injury.

This unit contains a permanent warning sticker located on back panel.

Do not allow children under 16 years to move the cart.

Model: MS9047/800TX

Cullerton TV/Media Stand

Southern Enterprises, Inc

600 Freeport Parkway,

Suite 200 Coppell, Texas, 75019

Manufacture Date: 10/15/2013

Parts Replacement Form

Customer Information

Name

Address

City/State/Zip Code

Phone Number

Please indicate where you purchased this item: Store/Website/Catalog

Please indicate color/size/style number:

Style No Parts Letter Parts Description Quantity Needed

Please immediately examine this product carefully. Any request for missing parts or damage replacement

must be received within 90 days of your receipt of the product. Replacement, if available, will be

honored within this time frame. Parts will not be available for items arriving fully assembled. We do

not recommend modifying product(s) and we are not responsible for any damages due to product

modication(s). If damages or missing parts are not reported within 90 days of your receipt, we are under

no obligation to provide parts or replacement merchandise.

Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri

Central time if you have product issues or email us at [email protected]. Please ask for customer

service representative for issues involving damages or replacement parts. Please ask for technical

assistance representative for any issues with product and assembly/construction.

Please contact the retailer that you purchased from for returns.

Customer Service

1-800-633-5096

[email protected]

Southern Enterprises, Inc.

600 Freeport Parkway, Suite 200

Coppell, Texas 75019

Southern Enterprises MS904800TX User manual

Brand: Southern Enterprises

Model: MS904800TX

Type: User manual

This manual is also suitable for

Download PDF

report

Southern Enterprises MS904800TX User manual

This manual is also suitable for

Southern Enterprises MS904800TX User manual

Related papers

Other documents