Southern Enterprises FA939100TX Assembly Instruction Manual

FA939100TX- ESPRESSO

LYNDEN MEDIA

FIREPLACE MANTEL

ASSEMBLY INSTRUCTION

For assistance with assembly contact:

Southern Enterprises Inc.

Customer Service 1-800-633-5096

service@seidal.com

www.seidal.com

LYNDEN MEDIA

FIREPLACE

Parts List

Please review all parts and hardware before disposing of any packaging.

Call Customer Service if missing hardware. Do not return to store/retailer.

Using a screw that is too long will cause damage.

Before beginning assembly, separate each type of screw. Carefully study the

screw diagrams below. You may receive extra hardware with your unit.

A Quantity

of 36

CAM BOLT

B Quantity

of 34

WOOD DOWEL (￠8*30mm)

C Quantity

of 36

CAM LOCK

D Quantity

of 8

SHELF PIN

E Quantity

of 2

DOOR PULL

F Quantity

of 2

LONG BOLT (5/32”*7/8”)

G Quantity

of 2

MAGNETIC CATCH

H Quantity

of 53

SCREW(3*14MM)

I Quantity

of 2

SCREW(￠8*25mm)

J Quantity

of 2

METAL PLATE

K Quantity

of 26

SCREW(3*14MM)

L Quantity

of 4

HINGE

M Quantity

of 1

FIREBOX（IN SEPARATE CARTON）

(1) Quantity

of 1

BIG UPPER PANEL

(2) Quantity

of 2

MIDDLE SIDE PANEL

(3) Quantity

of 1

SMALL MIDDLE PANEL

(4) Quantity

of 1

SHELF PANEL

(5) Quantity

of 1

LEFT ADJUSTABLE SHELF PANEL

(6) Quantity

of 1

RIGHT ADJUSTABLE SHELF PANEL

(7) Quantity

of 1

BIG LEFT SIDE PANEL

(8) Quantity

of 1

BIG RIGHT SIDE PANEL

(9) Quantity

of 1

LOWER LEFT DIVIDED PANEL

(10) Quantity

of 1

LOWER RIGHT DIVIDED PANEL

(11) Quantity

of 1

BOTTOM PANEL

(12) Quantity

of 1

LEFT DOOR PANEL

(13) Quantity

of 1

RIGHT DOOR PANEL

(14) Quantity

of 1

MIDDLE BACK PANEL

(15) Quantity

of 2

SIDE BACK PANEL

(16) Quantity

of 1

TOP

PANEL

(17) Quantity

of 2

UPPER SIDE PANEL

(18) Quantity

of 1

UPPER BACK PANEL

(19) Quantity

of 1

WOOD HOLDER

Care and Cleaning Instructions:

Before using, wipe with a clean, dry cloth.

Periodically apply furniture wax to renew

the finish. Avoid rubbing or scratching the

surface with rough or abrasive objects.

Call Customer Service at 1-800-633-5096

Do not return product to store, please call

Manufacturer for assistance, questions or

Parts.

Assembly Tool Required

No.2 Phillips Screwdriver (Not Included)

LYNDEN MEDIA FIREPLACE

Assembly Instructions

Figure 1

Unpack and lay parts on clean,

padded surface like carpet or

blanket. Check that you have all

parts indicated on the front page

Insert cam locks (C) into predrilled

holes on the two lower side panel (7)

& (8) and two lower divided panel

(9) & (10).

Screw cam bolt (A) into predrilled

holes on shelf panel (4).

Attach the two lower side panel (7) &

(8) and two lower divided panel (9) &

(10).to shelf panel (4) by inserting

wood dowel (B) & cam bolt (A) into

corresponding predrilled holes until

the two lower side panel (7) & (8) and

two lower divided panel (9) & (10)&

shelf panel (4) meet.

Secure by rotating cam lock (C)

clockwise with Phillips screwdriver.

Repeat the same way to attach the

bottom panel (11 ) on the assembled

unit.

Figure 2

Insert cam locks (C) into predrilled

holes on the middle side panel (2)

and small middle panel (3).

Screw cam bolt (A) into predrilled

holes on pre-assemble parts in figure

1. Attach the middle side panel (2)

and small middle panel (3) to

pre-assemble parts in figure 1 by

inserting wood dowel (B) & cam bolt

(A) into corresponding predrilled

holes until middle side panel (2) and

small middle panel (3) &

pre-assemble parts in figure 1 meet.

Secure by rotating cam lock (C)

clockwise with Phillips screwdriver.

B

C

LYNDEN MEDIA FIREPLACE

Assembly Instructions

Figure 3

Insert cam locks (C) into predrilled

holes on the middle side panel (2)

and small middle panel (3).

Screw cam bolt (A) into predrilled

holes on the big upper panel (1).

Attach the big upper panel (1) to

three middle panel by inserting wood

dowel (B) & cam bolt (A) into

corresponding predrilled holes until

the big upper panel (1) & three

middle panel meet.

Secure by rotating cam lock (C)

clockwise with Phillips screwdriver.

Figure 4

Insert cam locks (C) into predrilled

holes on the upper side panel (17) .

Screw cam bolt (A) into predrilled

holes on the pre-assemble parts in

figure 3.

Attach the upper side panel (17) to

the pre-assemble parts in figure 3 by

inserting wood dowel (B) & cam bolt

(A) into corresponding predrilled

holes until the upper side panel (17)

& the pre-assemble parts in figure 3

meet.

Secure by rotating cam lock (C)

clockwise with Phillips screwdriver.

A

17

B

A

C

1

LYNDEN MEDIA FIREPLACE

Assembly Instructions

Figure 5

Insert cam locks (C) into predrilled

holes on the upper side panel (17) .

Screw cam bolt (A) into predrilled

holes on the top panel (16).

Attach the top panel (16) to the upper

side panel by inserting wood dowel

(B) & cam bolt (A) into corresponding

predrilled holes until the top panel

(16) & two upper side panel meet.

Secure by rotating cam lock (C)

clockwise with Phillips screwdriver.

Figure 6

Attach the middle back panels (14) &

side back panel (15) on the

pre-assembled unit by screw (H).

Then slip the upper back panel (18)

into the groove of middle back panel,

and attach it on the cabinet by screw

(H).

16

H

14

18

15

LYNDEN MEDIA FIREPLACE

Assembly Instructions

Figure 7

Insert the shelf pin (D) into the

pre-drilled hole on the cabinet side

panel and divided panel,

and well put the two adjustable shelf

panels (5) & (6) on it as shown.

Figure 8

Assemble the door hinge (L) on the

cabinet and right door panel (13) by

screw (K).

Assemble the magnet catch (G)

under the shelf panel by screw (H),

then attach the metal plate (J) on the

up inside of door panel by screw (K)

to let it can match the position of the

magnet catch.

At last, tighten the door pull (E) on

the door panel by long bolt (F) as

shown.

Repeat the same way to assemble

the left door panel (12) on the

cabinet.

LYNDEN MEDIA FIREPLACE

Assembly Instructions

Figure 9

Well put the fireplace (M) into cabinet

and avoid any scratch.

Figure 10

Assemble the wood holder (19) on

the bottom panel by using screw (I).

19

LYNDEN MEDIA FIREPLACE

Assembly Instructions

Figure 11

Now you can enjoy your new

fireplace.

Please immediately examine this product carefully. Any request for missing parts or damage replacement must be

received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time

frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s)

and we are not responsible for any damages due to product modification(s).

If damages or missing parts are not

reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise.

Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central

time if you have product issues or email us at service@seidal.com. Please ask for customer service

representative for issues involving damages or replacement parts. Please ask for technical assistance

representative for any issues with product and assembly/construction.

Please contact the retailer that you purchased from for returns.

Customer Information

Name

Address

City/State/Zip Code

Phone Number

Please indicate where you purchased this item: Store/Website/Catalog

Please indicate color/size/style number:

Style No Parts Letter Parts Description Quantity Needed

Parts Replacement Form

Customer Service 1-800-633-5096

[email protected]om

Southern Enterprises, Inc.

600 Freeport Parkway, Suite 200

Coppell, Texas 75019

CAUTION

The top shelf is intended for a flat screen television with a maximum overall width of 38”

and supports up to 85lb.

Each center shelf should not be loaded with more than 20 lb.

Each side shelf should not be loaded with more than 10 lb.

DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the

maximum sizes and weights indicated may result in instability causing possible injury.

This unit contains a permanent warning sticker located on back panel.

Do not allow children under 16 years old to move the cart.

Model: FA939100TX- ESPRESSO

LYNDEN MEDIA

FIREPLACE MANTEL

Southern Enterprises, Inc

600 Freeport Parkway, Suite 200

Coppell, Texas, 75019

Manufacture Date:

Southern Enterprises FA939100TX Assembly Instruction Manual

Southern Enterprises FA939100TX Assembly Instruction Manual

Related papers

Other documents