SEI TORRES HUTCH HO270600TX Assembly Instructions Manual

For assistance with assembly contact:

Southern Enterprises Inc.

Customer Service 1-800-633-5096

service@seidal.com

www.seidal.com

TORRES HUTCH

HO270600TX-

BLACK

Assembly Instructions

PO#11906

A Quantity

of 24

CAM BOLT（￠6.5*35mm

B Quantity

of 28

WOOD DOWEL（￠8*30mm）

C Quantity

of 24

CAM LOCK￠（￠14.8*11.5mm）

D Quantity

of 2

CONNECTION PLATE（L45*W12*D1mm）

E Quantity

of 4

FLAT HEAD SCREW（￠3*12mm）

F Quantity

of 24

COVER（￠16mm）

G Quantity

of 2

WALL AHCHOR

H Quantity

of 2

ANTI-TIP CHAIN

I Quantity

of 4

ANTI-TIP BRACKET

J Quantity

of 2

SCREW（￠4*16mm）

K Quantity

of 2

TORRES HUTCH

Parts List

Please review all parts and hardware before disposing of any packaging.

Call Customer Service if missing hardware. Do not return to store/retailer.

Using a screw that is too long will cause damage.

Before beginning assembly, separate each type of screw. Carefully study the

screw diagrams below . You may receive extra hardware with your unit.

SCREW（￠4*25mm）

(1) Quantity

of 1

TOP PANEL

(2) Quantity

of 1

BASE

(3) Quantity

of 1

LEFT SIDE PANEL

(4) Quantity

of 1

RIGHT SIDE PANEL

(5) Quantity

of 1

LEFT VERTICAL PANEL

(6) Quantity

of 1

RIGHT VERTICAL PANEL

(7) Quantity

of 1

UPPER SHELF PANEL

(8) Quantity

of 1

MIDDLE SHELF PANEL

(9) Quantity

of 2

UPPER VERTICAL PANEL

(10) Quantity

of 1

SHELF PANEL

(11) Quantity

of 1

LEFT BACK PANEL

(12) Quantity

of 1

RIGHT BACK PANEL

TORRES HUTCH

Parts List

Please review all parts and hardware before disposing of any packaging.

Call Customer Service if missing hardware. Do not return to store/retailer.

Using a screw that is too long will cause damage.

Before beginning assembly, separate each type of screw. Carefully study the

screw diagrams below . You may receive extra hardware with your unit.

Care and Cleaning Instructions:

Before using, wipe with a clean, dry cloth.

Periodically apply furniture wax to renew

the finish . Avoid rubbing or scratching the

surface with rough or abrasive objects.

For replacement parts or questions, please

Call Customer Service at 1-800-633-5096

Do not return product to store, please call

Manufacturer for assistance, questions or

Parts.

Assembly Tool Required

No.2 Phillips Screwdriver (Not Included)

Figure 1

INSERT CAM LOCK(C) INTO

PREDRILLED HOLES ON 1 PC SHELF

PANEL (10).

SCREW CAM BOLT(A) INTO

PREDRILLED HOLES ON LEFT

VERTICAL PANEL(5). ATTACH SHELF

PANEL (10) TO LEFT VERTICAL

PANEL(5) BY SLIPPING WOOD

DOWEL(B) & CAM BOLT(A) INTO

CORRESPONDING PREDRILLED

HOLES UNTIL SHELF PANEL (10) &

LEFT VERTICAL PANEL(5) MEET.

SECURE BY ROTATING CAM LOCK (C)

COUNTERCLOCKWISE WITH

PHILLIPS SCREWDRIVER.

Figure 2

INSERT UPPER SHELF PANEL (7)

INTO ASSEMBLED UNIT IN THE STEP

1.

TORRES HUTCH

Assembly Instructions

Figure 3

INSERT CAM LOCKS(C) INTO

PREDRILLED HOLES ON

ASSEMBLED UNIT IN THE STEP 2.

SCREW CAM BOLT(A) INTO

PREDRILLED HOLES ON RIGHT

VERTICAL PANEL (6). ATTACH RIGHT

VERTICAL PANEL (6) TO ASSEMBLED

UNIT IN THE STEP 2 BY SLIPPING

WOOD DOWEL(B) & CAM BOLT(A)

INTO CORRESPONDING PREDRILLED

HOLES UNTIL RIGHT VERTICAL

PANEL (6) & ASSEMBLED UNIT IN

THE STEP 2 MEET. SECURE BY

ROTATING CAM LOCK (C)

COUNTERCLOCKWISE WITH

PHILLIPS SCREWDRIVER.

Figure 4

INSERT CAM LOCKS(C) INTO

PREDRILLED HOLES ON

ASSEMBLED UNIT IN THE STEP 3.

SCREW CAM BOLT(A) INTO

PREDRILLED HOLES ON BASE (2).

ATTACH BASE (2) TO ASSEMBLED

UNIT IN THE STEP 3 BY SLIPPING

WOOD DOWEL(B) & CAM BOLT(A)

INTO CORRESPONDING PREDRILLED

HOLES UNTIL BASE (2) &

ASSEMBLED UNIT IN THE STEP 3

MEET. SECURE BY ROTATING CAM

LOCK (C) COUNTERCLOCKWISE

WITH PHILLIPS SCREWDRIVER.

TORRES HUTCH

Assembly Instructions

Figure 5

INSERT CAM LOCK(C) INTO

PREDRILLED HOLES ON MIDDLE

SHELF PANEL (8). SCREW CAM

BOLT(A) INTO PREDRILLED HOLES

ON ASSEMBLED UNIT IN THE STEP 4.

ATTACH MIDDLE SHELF PANEL (8)

TO ASSEMBLED UNIT IN THE STEP 4

BY SLIPPING WOOD DOWEL(B) &

CAM BOLT(A) INTO

CORRESPONDING PREDRILLED

HOLES UNTIL MIDDLE SHELF PANEL

(8) & ASSEMBLED UNIT IN THE STEP

4 MEET. SECURE BY ROTATING CAM

LOCK (C) COUNTERCLOCKWISE

WITH PHILLIPS SCREWDRIVER.

Figure 6

INSERT CAM LOCKS(C) INTO

PREDRILLED HOLES ON

ASSEMBLED UNIT IN THE STEP 5.

SCREW CAM BOLT(A) INTO

PREDRILLED HOLES ON LEFT SIDE

PANEL (3). ATTACH LEFT SIDE PANEL

(3) TO ASSEMBLED UNIT IN THE

STEP 5 BY SLIPPING WOOD

DOWEL(B) & CAM BOLT(A) INTO

CORRESPONDING PREDRILLED

HOLES UNTIL LEFT SIDE PANEL (3) &

ASSEMBLED UNIT IN THE STEP 5

MEET. SECURE BY ROTATING CAM

LOCK (C) COUNTERCLOCKWISE

WITH PHILLIPS SCREWDRIVER.

REPEAT WITH RIGHT SIDE PANEL

(4).

TORRES HUTCH

Assembly Instructions

Figure 7

INSERT CAM LOCKS(C) INTO

PREDRILLED HOLES ON UPPER

VERTICAL PANELS (9). SCREW CAM

BOLT(A) INTO PREDRILLED HOLES

ON ASSEMBLED UNIT IN THE STEP 6.

ATTACH UPPER VERTICAL PANELS

(9) TO ASSEMBLED UNIT IN THE

STEP 6 BY SLIPPING WOOD

DOWEL(B) & CAM BOLT(A) INTO

CORRESPONDING PREDRILLED

HOLES UNTIL UPPER VERTICAL

PANELS (9) TO ASSEMBLED UNIT IN

THE STEP 6 MEET. SECURE BY

ROTATING CAM LOCK (C)

COUNTERCLOCKWISE WITH

PHILLIPS SCREWDRIVER.

Figure 8

INSERT TO THE LEFT BACK

PANEL(11) & RIGHT BACK PANEL

(12) INTO ASSEMBLED UNIT IN THE

STEP 7.

TORRES HUTCH

Assembly Instructions

Figure 9

INSERT CAM LOCKS(C) INTO

PREDRILLED HOLES ON

ASSEMBLED UNIT IN THE STEP 8.

SCREW CAM BOLT(A) INTO

PREDRILLED HOLES ON TOP PANEL

(1). ATTACH TOP PANEL (1) TO

ASSEMBLED UNIT IN THE STEP 8 BY

SLIPPING WOOD DOWEL(B) & CAM

BOLT(A) INTO CORRESPONDING

PREDRILLED HOLES UNTIL TOP

PANEL (1) & ASSEMBLED UNIT IN

THE STEP 5 MEET.

SECURE BY ROTATING CAM LOCK (C)

COUNTERCLOCKWISE WITH

PHILLIPS SCREWDRIVER.

STICK COVERS (F) TO THE CAM

LOCKS (C) SURFACE.

USE CONNECTION PLATES (D) & FLAT

HEAD SCREWS (E) CONNECT HUTCH

& DESK TOGETHER.

TORRES HUTCH

Assembly Instructions

D

Figure 10

Figure 11

NOW YOUR NEW DESK READY TO

USE.

Figure 12

ATTACH BRACKET(I) TO THETOP

PANEL(1) WITH SCREW(J) FOR

BRACKET

DRILL 1/4 PILOT HOLES IN NEAR

PROXIMITY OF THE BRACKET(I)

ATTACHED TO THE TOP PANEL(1)AND

TAP THE PLASTIC ANCHOR(G) INTO

WALL.

FASTEN BRACKET(I) USING

SCREW(K) FOR WALL INTO THE

PLASTIC ANCHOR(G).

Figure 13

MOVE THIS ITEM TO THE FASTENED

WALL BRACKET(I) AND

TIE IN

BOTH BRACKET(I) WITH PLASTIC

CHAIN(H) AS SHOWN IN DIAGRAM.

TORRES HUTCH

Assembly Instructions

J

I

H

Wal l

Please immediately examine this product carefully. Any request for missing parts or damage replacement must

be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this

time frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying

product(s) and we are not responsible for any damages due to product modification(s).

If damages or missing

parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement

merchandise.

Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central

time if you have product issues or email us at service@seidal.com. Please ask for customer service

representative for issues involving damages or replacement parts. Please ask for technical assistance

representative for any issues with product and assembly/construction.

Please contact the retailer that you purchased from for returns.

Customer Information

Name

Address

City/State/Zip Code

Phone Number

Please indicate where you purchased this item: Store/Website/Catalog

Please indicate color/size/style number:

Style No Parts Letter Parts Description Quantity Needed

Parts Replacement Form

Customer Service 1-800-633-5096

service@seidal.com

Southern Enterprises, Inc.

600 Freeport Parkway, Suite 200

Coppell, Texas 75019

CAUTION

Max weight capacity for the hutch is 20 lb.

DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the

weights indicated may result in instability causing possible injury.

This unit contains a permanent warning sticker located on under side of top shelf.

Do not allow children under 16 years to move the cart.

Model: HO270600TX

TORRES HUTCH

Southern Enterprises, Inc

600 Freeport Parkway, Suite 200

Coppell, Texas, 75019

Manufacture Date:

SEI TORRES HUTCH HO270600TX Assembly Instructions Manual

SEI TORRES HUTCH HO270600TX Assembly Instructions Manual

Related papers

Other documents