Rest Rite HD35320DB Operating instructions

Type
Operating instructions

This manual is also suitable for

PARTS AND HARDWARE LIST
A
(Continued on back)
A.
Headboard
(1 pc)
B.
Footboard
(1 pc)
C. Frame
(1 pc)
D.
Decorative
Top Piece
(4 pcs)
E.
Corner Leg
(4 pcs)
Set the Frame (Part C) on its side and unfold it.
STEP 1
ASSEMBLY INSTRUCTIONS
Platform Bed
Contains One (1) Bed and Hardware
IMPORTANT NOTE:
Carefully remove all the parts from the box. Arrange on a at
surface and verify you have all of the following parts and hardware.
Attach the Headboard (Part A) and the Footboard (Part B) to
the Frame (Part C) by sliding the bolts on the ends of the
frame into the slots on the Headboard and Footboard.
STEP 2 STEP 3
STEP 4 STEP 5
ASSEMBLY INSTRUCTIONS (CONTINUED)
A
Install the Decorative Top Pieces (Part D) into the
Headboard (Part A) and Footboard (Part B).
Your Platform Bed is now completely set up and
ready for use.
Insert the Corner Legs (Part E) into the Headboard (Part A)
and Footboard (Part B).
Rotate the two legs (one at the head of the bed and one at
the foot of the bed) until they lock into place. Note that these
two legs will be slightly o the oor to allow for uneven
oors. Set the frame up with the legs resting on the oor.
  • Page 1 1
  • Page 2 2

Rest Rite HD35320DB Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI