Page is loading ...
PARTS AND HARDWARE LIST
A
(Continued on back)
A.
Headboard
(1 pc)
B.
Footboard
(1 pc)
C. Frame
(1 pc)
D.
Decorative Top Piece
(4 pcs)
E.
Headboard Leg
(2 pcs)
Set the Frame (Part C) on its side and unfold it.
STEP 1 STEP 2
ASSEMBLY INSTRUCTIONS
P
latform Bed
Contains One (1) Bed and Hardware
IMPORTANT NOTE:
Carefully remove all the parts from the box. Arrange on a at
surface and verify you have all of the following parts and hardware.
Rotate the two legs (one at the head of the bed and one at
the foot of the bed) until they lock into place. Note that these
two legs will be slightly o the oor to allow for uneven
oors. Set the frame up with the legs resting on the oor.
C
C
STEP 3 STEP 4
STEP 5
ASSEMBLY INSTRUCTIONS (CONTINUED)
A
Attach the Headboard (Part A) and the Footboard (Part B) to the Frame (Part C) by sliding the bolts on the ends of the frame
into the slots on the Headboard and Footboard. Your Platform Bed is now set up.
Install the Decorative Top Pieces (Part D) into the Headboard
(Part A) and Footboard (Part B) by turning the top pieces
until they are secured tightly.
Insert the Headboard Legs (Part E) into the Headboard
(Part A). Brackets on the legs should be facing the center
of the bed.
A
A
A
E
C
E
D
D
B
B
D
D
/
