Dorel DA1010-1C User manual

Type
User manual
INSTRUCTION MANUAL
TWIN / TWIN BUNK BED
Model No:
DA1010-CU (WHITE)
DA1010-1C / DA1010-2C (WHITE)
DA1010G-CU (GRAY)
DA1010G-1C / DA1010G-2C (GRAY)
Lot number:
UPC CODE:
0-65857-17960-6 (WHITE)
0-65857-17958-3 / 0-65857-17959-0 (WHITE)
0-65857-17963-7 (GRAY)
0-65857-17961-3 / 0-65857-17962-0 (GRAY)
NOTE:
(TAKEN FROM CARTON)
______________________________
Date of purchase:
______ / ______ / ______
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer
service department. We will replace the part
FREE of charge.
Tel #: 1-800-295-1980
Fax #: 514-353-7819
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
WARNING
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product
model number, color and a detailed description of the part.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada, H1G 3L1
*
*
*
*
*
*
*
*
Check bolts/screws periodically and tighten them if necessary.
Dorel warrants its product to be free from defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 1 year from the date of original purchase. This
warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair
or replacement of defective furniture components and no assembly labor is included. This
warranty does not apply to any product which has been improperly assembled, subjected to
misuse or abuse or which has been altered or repaired in any way. This warranty gives you
specific legal rights and you may also have other rights which vary from State to State
WARNING: Should this product
become damaged, and/or components
are broken or missing, DO NOT USE.
MAINTENANCE
LIMITED WARRANTY
CARE AND CLEANING
Dust regularly with a soft, dry cloth. We do not recommend the use of chemical cleaners or wax
on our lacquered furniture as it may damage the finish. Keep solvents, alcohol, nail polish and
polish removers away from your hardwood furniture surfaces.
NOTES
1 2
3 4
5 6
7 8
9 10
11.8mm x 15mm
WOOD DOWEL
14 PCS
10mm x 50mm
4mm x 35mm
ALLEN KEY
1 PC
CAP
4 PCS
4mm x 30mm
BARREL NUT
16 PCS
6.5mm x 100mm
FLAT HEAD WOOD SCREW
6 PCS
FLAT HEAD WOOD SCREW
20 PCS
WOOD DOWEL
4 PCS
19mm x 95mm
WOOD JOINT CONNECTOR (4mm HEX HEAD)
6 PCS
HARDWARE LIST
TWIN / TWIN BUNK BED
JOINT CONNECTOR (4mm HEX HEAD)
16 PCS
WOOD JOINT CONNECTOR (4mm HEX HEAD)
14 PCS
1/4" x 100mm
6.5mm x 48mm
A B C
TWIN / TWIN BUNK BED
LEFT HEADBOARD
2 PCS
RIGHT HEADBOARD
1 PC
FOOTBOARD
2 PCS
PARTS LIST
D E F
G H I
J K L
M N
TWIN / TWIN BUNK BED
PARTS LIST
TOP SIDE RAIL
(WITH 3 HOLES)
1 PC
BOTTOM SIDE RAIL
(WITH 2 HOLES)
1 PC
TOP SIDE RAIL
(WITH 1 HOLES)
1 PC
BOTTOM SIDE RAIL
(WITH NO HOLES)
1 PC
SLAT
2 PCS
LONG GUARDRAIL
2 PCS
SHORT GUARDRAIL
2 PCS
LONG LADDER END
1 PC
GUARDRAIL LEG
2 PCS
SHORT LADDER END
1 PC
LADDER STEP
4 PCS
TWIN / TWIN BUNK BED
Attach footboards (C) to the bottom side rails (E and G) using joint connectors (1) and
barrel nuts (8) as shown.
Use Allen key (9) to tighten all joint connectors.
Note: This is the lower bunk.
STEP 1
I
K
Holes
1
1
9
8
8
8
8
I
K
Holes
1
1
9
8
8
8
8
STEP 2
Insert wood dowels (7) into each end of the long guardrails (I). Attach two long
guardrails (I) and two top side rails (D and F) to the headboards (A and B) as shown.
Fasten top side rails (D and F) with joint connectors (1) and barrel nuts (8). Fasten long
guardrails (I) with wood joint connectors (3) .
Use Allen key (9) to tighten all joint connectors.
This is the upper bunk.
TWIN / TWIN BUNK BED
3
M
3
M
3
M
STEP 3
Attach slats (H) to side rails (D and F) of the upper bunk and (E and G) of the lower bunk
with flat head wood screws (4) using a Phillips head screwdriver (not included).
TWIN / TWIN BUNK BED
STEP 4
Insert wood dowels (7) in the ends of short guardrails (J). Attach short guardrails (J) to left
headboard (A) with wood joint connectors (3). Attach the guardrail leg (N) to the short
guardrails (J) and top side rail (D) with flat head wood screws (5). Attach another guardrail
leg (N) to long guard rails (I) and top side rail (F) with flat head wood screws (5).
Use a Phillps head screwdriver (not included) to install screws (5).
TWIN / TWIN BUNK BED
STEP 5
Place four wood dowels (6) into the holes in the bottom posts (C). Stack the top bunk
onto the bottom bunk with the help of another person.
TWIN / TWIN BUNK BED
STEP 6
To assemble the ladder, insert wood dowels (7) into the end of the ladder steps (M).
Attach long ladder end (K) and short ladder end (L) to ladder steps (M) with wood joint
connectors (2) and Allen key (9).
TWIN / TWIN BUNK BED
8 PCS
2
7
8 PCS
STEP 7
Attach the ladder to the short guardrails (J), the top side rail (D) and bottom side rail (E)
with wood joint connectors (2) as shown.
NOTE: If slats (H) are covering the ladder mounting holes, remove slats (H) and replace
them after the ladder is attached.
TWIN / TWIN BUNK BED
N
H
I
2
6PCS
2
2. Remove the top bunk from the lower bunk with another person.
Note: Switching the headboards will allow the two single beds to be identical (the headboards
will have taller posts and the footboards will have the shorter posts).
TWIN / TWIN BUNK BED
4.Re-assemble the headboards (with tall posts) and footboards (with short posts) to side rails.
3. Disassemble the side rails from all headboards (top and lower bunks).
1. Remove the ladder and all the guardrails.
Instructions for converting the bunk bed into two single beds
To be used as
the headboard
for single bed
To be used as
the footboard
for single bed
To be used as
the headboard
for single bed
To be used as
the footboard
for single bed
footboard
headboard
headboard
headboard
footboard
footboard
Caps (10)- 4 pcs
That's it! You've finished assembling your bunk bed.
TWIN / TWIN BUNK BED
CAUTION: This unit is intended for use only with the products
and/or maximum weights indicated. Use with other products and/or
products heavier than the maximum weights indicated may result in
instability or cause possible injury.
DO NOT ALLOW HORSEPLAY
ON OR UNDER THE BED AND
PROHIBIT JUMPING ON THE
DO NOT ALLOW CHILDREN UNDER 6
YEARS OF AGE TO USE THE UPPER
BUNK. BED IS DESIGNED FOR
CHILDREN RANGING FROM 6 YEARS
OF AGE TO YOUNG TEENAGERS.
USE ONLY COIL SPRING
MATTRESSES ON BOTH
THE UPPER AND LOWER
BUNKS. FAILURE TO DO
SO CAN RESULT IN
USE ONLY MATTRESSES WHICH ARE 74"-75" LONG AND 37 1/2" - 38 1/2" WIDE
ON UPPER AND ON LOWER BUNKS. ENSURE THICKNESS OF MATTRESS DOES
NOT EXCEED 6".
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer
service department. We will replace the part FREE of
charge.
Tel #: 1-800-295-1980
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
MAXIMUM WEIGHT
CAPACITY: 165 LBS
(75KGS) PER LEVEL.
MODEL #: DA1010-1 / DA1010-2/ DA1010G-1C / DA1010G-2C
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity: (Please be sure to list model number or SKN number)
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Customer Service
Customer Service Phone Number 1-800-295-1980
Customer Service Fax Number 514-353-7819
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Dorel DA1010-1C User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI