tvONE C2-2755 User manual

tvONE
Brand
tvONE
Model
C2-2755
Category
Video switches
Type
User manual

This manual is also suitable for

C2-2855 Universal Scaler PLUS
C2-2755 Video Scaler PLUS
C2-2655 Scan Converter PLUS
User Manual
V1.14
PDF-UG-C2-2X55
2 | P a g e
Contents
1 DISCLAIMER ............................................................................................................................... 5
Regulatory Agency Acceptance ..........................................................................................................................5
European ‘CE’ Mark Statement ............................................................................................................................... 5
FCC Statement ......................................................................................................................................................... 5
Manual Copyright Notice ....................................................................................................................................6
2 SAFETY INSTRUCTIONS ....................................................................................................... 7
3 UNPACKING AND INSTALLATION ..................................................................................... 12
3.1
Shipping Carton ................................................................................................................................ 12
3.2
Important Safety Instructions ............................................................................................................ 12
3.3
Initial Operation Check Using Factory Default Settings ................................................................... 12
4 QUICK START ........................................................................................................................... 13
4.1
Overview ........................................................................................................................................... 13
4.1.1
Input/Output Connectivity ................................................................................................................. 13
4.1.2
Output Resolution Support ............................................................................................................... 13
4.2
Box Contents .................................................................................................................................... 14
4.3
C2-2x55 Connections ....................................................................................................................... 14
4.4
Menu Overview ................................................................................................................................ 15
4.5
Setting an Output Resolution ........................................................................................................... 15
4.6
Switching .......................................................................................................................................... 15
4.7
C2-2x55 Architecture ........................................................................................................................ 15
4.8
Inputs/Outputs .................................................................................................................................. 16
4.8.1
Universal DVI ................................................................................................................................... 16
5 PANEL INTERFACE ............................................................................................................. 18
5.1
Panel Overview ................................................................................................................................ 18
5.2
Using the C2-2x55 ............................................................................................................................ 18
5.3
OLED Panel Overview ..................................................................................................................... 19
5.4
Primary/Background Indicators ........................................................................................................ 19
6 MENU OVERVIEW .................................................................................................................... 20
6.1
Layering Control ............................................................................................................................... 20
6.2
Swapping Layers .............................................................................................................................. 21
6.3
Genlock & Framelock & Hiding ........................................................................................................ 21
6.4
Scaling Overview .............................................................................................................................. 22
6.5
Aspect Ratio Conversion .................................................................................................................. 22
6.6
Importing Logos ................................................................................................................................ 22
6.7
Importing Items ................................................................................................................................. 23
7 BUTTON NAVIGATION ........................................................................................................ 24
7.1.1
Powering Up ..................................................................................................................................... 24
7.1.2
Button Colors .................................................................................................................................... 24
7.1.3
Menu Navigation .............................................................................................................................. 24
7.1.4
Source Selection & Loading Presets ................................................................................................ 24
7.1.5
Other Useful Selections .................................................................................................................... 25
8 SHORTCUT & LIVE MENUS ................................................................................................ 27
8.1
Overview ........................................................................................................................................... 27
8.2
Shortcuts & Live Menu Map ............................................................................................................. 28
8.2.1
Shortcuts .......................................................................................................................................... 28
8.2.2
Live Menu ......................................................................................................................................... 29
8.2.3
Primary ............................................................................................................................................. 29
8.3
Background ...................................................................................................................................... 29
8.4
Audio ................................................................................................................................................ 29
8.5
Layer Order ...................................................................................................................................... 30
3 | P a g e
8.7
Freeze .............................................................................................................................................. 31
8.8
Preset ............................................................................................................................................... 31
8.9
Logo .................................................................................................................................................. 31
8.10
Transition .......................................................................................................................................... 31
9 POPULAR TASKS ..................................................................................................................... 32
9.1
Setting up Sources and Outputs....................................................................................................... 32
9.1.1
Source Set up ................................................................................................................................... 32
9.1.2
Output Set Up ................................................................................................................................... 32
9.2
Switching Sources ............................................................................................................................ 32
9.3
Customizing Transitions ................................................................................................................... 32
9.4
Creating a picture in picture effect .................................................................................................... 33
9.4.1
Resizing the Primary Layer .............................................................................................................. 33
9.4.2
Adding a Background ....................................................................................................................... 33
9.5
Adding a Color Field as a Background ............................................................................................. 33
9.6
Adding a Still Image as a Background.............................................................................................. 34
9.7
Adding a logo to a presentation ........................................................................................................ 35
9.8
Creating a lower third ....................................................................................................................... 35
9.9
Using audio from alternative sources ............................................................................................... 36
10 SETUP MENU ....................................................................................................................... 37
10.1
Initial Set Up ..................................................................................................................................... 37
10.2
Connections ..................................................................................................................................... 37
10.2.1
HDMI ................................................................................................................................................ 38
10.2.2
Universal DVI ................................................................................................................................... 39
10.2.3
3G/HD/SD-SDI ................................................................................................................................. 39
10.2.4
PC/HD .............................................................................................................................................. 39
10.2.5
YC/CV .............................................................................................................................................. 39
10.2.6
Audio Connections ........................................................................................................................... 40
10.2.7
Phoenix Audio .................................................................................................................................. 40
10.2.8
3.5mm Audio Input ........................................................................................................................... 40
10.3
Setup Menu ...................................................................................................................................... 41
10.3.1
Setup Menu Map .............................................................................................................................. 41
10.3.2
System .............................................................................................................................................. 41
10.3.3
Sources ............................................................................................................................................ 42
10.3.4
Audio Source .................................................................................................................................... 42
10.3.5
Input Type......................................................................................................................................... 42
10.3.6
RGB Settings .................................................................................................................................... 43
10.3.7
YUV Settings .................................................................................................................................... 43
10.3.8
Aspect Ratio ..................................................................................................................................... 43
10.3.9
Align .................................................................................................................................................. 43
10.3.10
On Source Loss ................................................................................................................................ 43
10.3.11
De-Interlace ...................................................................................................................................... 43
10.3.12
Diagonal Interpolate ......................................................................................................................... 44
10.3.13
Noise Reduction ............................................................................................................................... 44
10.3.14
Field Swap ........................................................................................................................................ 44
10.3.15
Field Offset ....................................................................................................................................... 44
10.3.16
Procamp ........................................................................................................................................... 44
10.3.17
EDID ................................................................................................................................................. 44
10.3.18
HDCP ............................................................................................................................................... 45
10.4
Outputs ............................................................................................................................................. 46
10.4.1
Connectors ....................................................................................................................................... 46
10.4.2
Video ................................................................................................................................................ 46
10.4.3
Audio ................................................................................................................................................ 47
10.5
Preset ............................................................................................................................................... 47
10.6
Layers ............................................................................................................................................... 47
10.7
Back Color ........................................................................................................................................ 47
10.8
Genlocking your unit ......................................................................................................................... 48
10.9
Layer Order ...................................................................................................................................... 48
4 | P a g e
10.11
Presets ............................................................................................................................................. 49
10.12
Transitions ........................................................................................................................................ 49
11 TROUBLESHOOTING AND TECHNICAL SUPPORT ........................................................... 50
12 FREQUENTLY ASKED QUESTIONS ................................................................................... 51
12.1
There is no picture on the Output. .................................................................................................... 51
12.2
There is excessive flicker on the Output. ......................................................................................... 51
12.3
The Output image is distorted .......................................................................................................... 51
12.4
Some colors appear to be incorrect on the CV/YC output ............................................................... 51
12.5
How can I reduce color smearing on CV connections? .................................................................... 51
12.6
I can no longer adjust the Output image resolution. ......................................................................... 51
12.7
The picture on the video display is black and white. ........................................................................ 51
12.8
The picture on the video display is green. ........................................................................................ 51
12.9
The RGB input is selected but the image is rolling or pink ............................................................... 52
12.10
The video signal from my DVD player does not appear to work ...................................................... 52
12.11
Image is flashing, snow is present, or source image does not appear ............................................. 52
13 RETURN PROCEDURE ............................................................................................................ 53
13.1
Trouble Shooting .............................................................................................................................. 53
13.2
To return a unit for repair .................................................................................................................. 53
14 WARRANTY POLICY ........................................................................................................... 54
14.1
Limited Warranty .............................................................................................................................. 54
14.2
Limitations ........................................................................................................................................ 54
5 | P a g e
1
Disclaimer
This product is intended for professional and/or home use. This product is not intended for use in a medical
environment and does not have the required certifications for such use. Similarly, use aboard any aircraft or
spacecraft while in flight or as an adjunct to any surface, airborne or marine navigation system or any
offshore marine activity, including control of any watercraft, or any use similar to those specifically herein
mentioned is prohibited. Use in the aforementioned circumstances would require additional testing and
certification.
You have not become the owner of any software - you have merely purchased the right to use the software.
You may make one copy of the software for your own use. Other copies will be deemed a breach of
copyright.
No warranty is made either expressed or implied including but not limited to any implied warranties of
merchantability or fitness for a particular purpose. In no event shall the supplier or manufacturer of this
product be liable for errors found within, or be liable for any direct, indirect or consequential damages or loss
in connection with the purchase or use of this hardware software or manual. The sole and exclusive liability
to the supplier and manufacturer regardless of the form of action shall not exceed the replacement cost of
the materials described herein.
By using this equipment you have indicated that you have agreed to the terms listed above. If you do not
wish to agree or the above terms are contrary to your conditions of purchase you may return the equipment,
unused, to your supplier. All trademarks and copyrights are acknowledged. E&OE.
Regulatory Agency Acceptance
European ‘CE’ Mark Statement
Emissions: BS EN 55103-1:2009+A1:2012 (Generic Emission Standard for all environments: E1-E5)
Immunity: BS EN 55103-2:2009 (Generic Immunity Standard for all environments: E1-E5)
FCC Statement
Class B Device: This equipment has been tested and found to comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide a reasonable protection
against harmful interference when the equipment is operated in all environments. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the Instruction
Manual, may cause harmful interference to radio communications.
This Class B Digital Apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet Appareil Numerique de la Classe B respecte toutes les exigencies du Reglemente Sur Le Material
Brouilleur Canada.
WARNING: An AC adapter with a ferrite core must be used for RF interference suppression.
To assure continued FCC Class B emission limit compliance, the user must only use shielded video cables
when connecting to external units. If the HDMI, DVI-U or PC/HD ports are to be used, they must be
connected by compatible shielded interface cables with two ferrite cores to avoid potential harmful
interference.
This equipment has more than one interface connector, do not leave cables connected to unused interfaces.
Any unauthorized changes or modifications to this equipment could void the user’s authority to operate it.
Direct all inquiries regarding FCC compliance to: tvONE
2791 Circleport Drive, Erlanger, KY 41018, USA
Phone: 859-282-7303 Fax: 859-282-8225 Email: tech.u[email protected]
6 | P a g e
Manual Copyright Notice
This Operation Manual is the intellectual property of tvONE, ©2014. No portion of this manual may be copied
or reproduced in any manner or by any means, including, but not limited to electronic and electro-
mechanical, without the express written permission of tvONE.
7 | P a g e
2
Safety Instructions
To insure the best from this product, please read this manual carefully. Keep it in a safe place for future
reference.
To reduce the risk of electric shock, do not remove the cover from the unit.
No user serviceable parts inside. Refer servicing to qualified personnel.
2.1 Power and connections
This unit is not disconnected from the AC power source as long as it is connected to the wall outlet. The off
state for this unit is called standby mode. In standby mode the unit is designed to consume a reduced
quantity of power compared to normal operating modes.
When not using the unit for a long period of time, insure that the AC power cord is disconnected from the
wall outlet.
The AC wall outlet should be installed near to the unit and be easily accessible.
Do not plug in or attempt to operate an obviously damaged unit.
2.2 Water and moisture
To reduce the risk of fire and personal injury, operation of this device outdoors and/or exposure to rain, water
or excessive moisture is expressly prohibited.
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
2.3 General care
Do not force switches or external connections.
When moving the unit, disconnect the serial port connections first then the power cable and finally the
interconnecting cables to other devices.
Do not attempt to clean the unit with chemical solvents or aerosol cleaners, as this may damage the unit.
Use a clean dry cloth.
2.4 Location
Installation of this unit should be in a cool dry place, away from sources of excessive heat, vibration, dust,
moisture and cold.
2.5 Ventilation
Slots and openings in the sides of the unit are provided for ventilation. To ensure reliable operation, avoid
obstruction of these openings and ensure the unit is installed in a well-ventilated area.
2.6 Intellectual property
Some IC chips in this product include confidential and/or trade secret property. Therefore you may not copy,
modify, adapt, translate, distribute, reverse engineer, reverse assemble or decompile the contents thereof.
8 | P a g e
2.0 IMPORTANT: CONSIGNES DE SECURITE
Afin de tirer le meilleur de ce produit, merci de lire attentivement ce manuel. Gardez-le dans un endroit sûr
pour pouvoir le consulter à nouveau.
Afin de réduire le risque de choc électrique, ne retirez pas l’unité de sa protection.
Aucune pièce réparable par l’utilisateur à l’intérieur. Référez-vous à des personnes qualifiées.
2.1 Alimentation électrique et connexions
Cette unité n’est pas déconnectée de la source de courant électrique tant qu’elle est connectée à la prise
murale. Le mode éteint de cette unité est appelé mode de veille. En mode de veille, cette unité est conçue
pour consommer une quantité réduite de courant par rapport aux modes normaux d’utilisation.
Lorsque vous n’utilisez pas l’unité pendant une longue période, assurez-vous que le câble d’alimentation
électrique est déconnecté de la prise murale.
La prise murale de courant doit être installée près de l’unité et aisément accessible.
Ne branchez pas et n’essayez pas d’utiliser une unité visiblement endommagée.
2.2 Eau et humidité
Pour réduire les risques d’incendie et de dommages corporels, l’utilisation de cet appareil à l’extérieur et/ou
son exposition à la pluie, l’eau ou une humidité excessive est expressément interdite.
L’appareil ne doit pas être exposé aux gouttes ou aux éclaboussures et aucun objet contenant de l’eau,
comme par exemple un vase, ne doit être posé sur l’appareil.
2.3 Entretien général
Ne forcez pas les boutons ou connexions externes.
Lorsque vous déplacez l’unité, déconnectez d’abord les connexions de ports en série puis le câble
d’alimentation et enfin les câbles de connexion avec d’autres appareils.
N’essayez pas de nettoyer l’unité avec des dissolvants chimiques ou des produits nettoyants en aérosol, car
cela peut endommager l’unité. Utilisez un chiffon propre et sec.
2.4 Emplacement
L’installation de cette unité doit se faire dans un endroit frais et sec, éloigné de sources excessives de
chaleur, de vibrations, de poussière, d’humidité et de froid.
2.5 Aération
Les rainures et les ouvertures sur les cotés de l’unité servent à l’aérer. Pour permettre une utilisation sûre,
évitez d’obstruer ces ouvertures et assurez-vous que l’unité est installée dans un endroit bien aéré.
2.6 Propriété intellectuelle
Certaines puces IC dans ce produit contiennent des éléments propriétaires confidentiels et/ou des secrets
commerciaux. Vous ne devez donc pas copier, modifier, adapter, traduire, distribuer, démonter,
désassembler, ou décomposer leur contenu.
9 | P a g e
2.0 INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Para sacar el mejor provecho de este producto, léase este manual con detenimiento. Guárdelo en un lugar
seguro para poder hacerle referencia en el futuro.
Para reducir el riesgo de calambre, no quite la cubierta del aparato.
No hay piezas utilizables dentro. Remítase todo mantenimiento a personal cualificado.
2.1 Corriente y conexiones
Mientras esté conectada a una toma de electricidad, el aparato seguirá conectado a la fuente de corriente
CA. A la posición de «off» de este aparato se le denomina posición de espera. En la posición de espera, el
aparato está diseñado a consumir una cantidad reducida de electricidad en comparación con los modos de
operación normales.
Asegúrese de desconectar el cable de corriente CA de la toma de la pared cuando no va a utilizar el aparato
por un periodo largo de tiempo.
La toma CA de la pared ha de estar instalada cerca del aparato y debe ser fácilmente accesible.
No enchufe ni intente operar un aparato que esté evidentemente dañado.
2.2 Agua y humedad
Para reducir el riesgo de fuego o de daños personales, se prohíbe la utilización de este aparato en el
exterior y/o su exposición a la lluvia, al agua o a atmósferas de excesiva humedad.
El aparato no debe situarse cerca de zonas en las que haya riesgo de goteo o salpicaduras. Tampoco
deben colocarse objetos que contengan agua (jarrones, por ejemplo) en el mismo.
2.3 Cuidado general
No forzar interruptores o conexiones externas.
Al mover el aparato, desconecte las conexiones del puerto en serie primero, luego el cable de electricidad y
finalmente los cables interconectados a otros aparatos.
No intente limpiar el aparato con disolventes químicos o productos de limpieza aerosol, ya que podrían
dañar el aparato. Utiliza un paño limpio y seco.
2.4 Ubicación
Este aparato se debe instalar en un lugar seco y fresco, lejos de fuentes de calor excesivas, la vibración, el
polvo, la humedad y el frío.
2.5 Ventilación
El aparato viene provisto de ranuras y agujeros en los lados para la ventilación.
Para asegurar una operación eficaz, se debe evitar la obstrucción de estos agujeros y también asegurar que
el aparato se instale en una zona con adecuada ventilación.
2.6 Propiedad intelectual
Algunos chips con circuito integrado de este producto incluyen propiedad confidencial y/o propiedad de
secreto comercial. Por lo tanto queda prohibido copiar, modificar, adaptar, traducir, distribuir, usar técnicas
retroactivas, desmontar, o recopilar los contenidos del mismo.
10 | P a g e
2.0 WICHTIGE SICHERHEITSVORSCHRIFTEN
Lesen Sie diese Bedienungsanleitung bitte sorgfältig, um Ihr Produkt optimal nützen zu können, und
bewahren Sie sie zum späteren Nachschlagen an einem sicheren Ort auf.
Entfernen Sie bitte keinesfalls die Abdeckung, um der Gefahr eines Stromschlags vorzubeugen.
Im Inneren des Geräts befinden sich keine Teile, die vom Benutzer gewartet werden können. Lassen Sie
Wartungsarbeiten nur von Fachpersonal durchführen.
2.1 Stromversorgung und anschlüsse
Solange das Gerät mit einer Steckdose verbunden ist, bleibt die Stromversorgung aufrecht. Der
Ausschaltzustand des Geräts wird als Standbymodus bezeichnet. Im Standbymodus verbraucht das Gerät
weniger Strom als in den üblichen Betriebsarten.
Wird das Gerät über einen längeren Zeitraum hinweg nicht verwendet, ziehen Sie bitte das Stromkabel aus
der Steckdose.
Die Steckdose sollte sich in der Nähe des Geräts befinden und leicht zugänglich sein.
Verbinden Sie ein offensichtlich beschädigtes Gerät keinesfalls mit einer Steckdose und versuchen Sie auch
nicht, es zu bedienen.
2.2 Wasser und feuchtigkeit
Um die Gefahr eines Brandes oder einer Körperverletzung zu verringern, ist es ausdrücklich verboten,
dieses Gerät im Freien in Betrieb zu nehmen und/oder es Regen, Wasser oder hoher Feuchtigkeit
auszusetzen.
Das Gerät darf keinen Tropfen oder Spritzern ausgesetzt werden und es dürfen keine mit Flüssigkeiten
gefüllte Behälter, wie Vasen, auf das Gerät gestellt werden.
2.3 Allgemeine pflege
Wenden Sie bei der Handhabung von Schaltern und Anschlüssen keine Gewalt an.
Beim Umstellen des Geräts entfernen Sie zuerst die seriellen Anschlüsse, dann das Stromkabel und zum
Schluss die Verbindungskabel zu anderen Geräten.
Versuchen Sie keinesfalls, das Gerät mit chemischen Lösungsmitteln oder Sprayreinigern zu reinigen, da
dies das Gerät beschädigen könnte. Verwenden Sie ein sauberes, trockenes Tuch.
2.4 Aufstellung
Das Gerät sollte an einem kühlen, trockenen Ort aufgestellt werden, fern von übermäßiger Wärme,
Vibrationen, Staub, Feuchtigkeit und Kälte.
2.5 Belüftung
Seitliche Schlitze und Öffnungen sorgen für die Belüftung des Geräts. Um die ordnungsgemäße Belüftung
zu gewährleisten, dürfen diese Öffnungen nicht verdeckt werden. Sorgen Sie außerdem dafür, dass das
Gerät an einem gut belüfteten Ort aufgestellt wird.
2.6 Gewerbliches eigentum
Einige integrierte Schaltkreise in diesem Produkt enthalten vertrauliche
Informationen und/oder Betriebsgeheimnisse. Sie dürfen daher diese Inhalte nicht kopieren, modifizieren,
adaptieren, übersetzen, verteilen, rückentwickeln, rückassemblieren oder dekompilieren.
11 | P a g e
2.0 BELANGRIJKE VEILIGHEIDSINSTRUCTIES
Lees deze handleiding zorgvuldig door om het beste uit uw product te halen. Bewaar het op een veilige plek
voor raadpleging in de toekomst.
Haal nooit het omhulsel van de eenheid af, dit om de kans op een elektrische schok te verminderen. Maak
het apparaat nooit open: er bevinden zich geen door de gebruiker in te stellen onderdelen in het apparaat.
Laat service en onderhoud over aan een gekwalificeerde technicus.
2.1 Elektriciteit en aansluiting
Deze eenheid is niet van de wisselstroom voedingsbron gescheiden wanneer de stekker nog in het
stopcontact zit. Wanneer de eenheid uitstaat, staat deze nog in de stand-by modus. In de stand-by modus
vergt de eenheid minder stroom dan in de normale "aan" modus.
Wanneer u de eenheid voor langere tijd niet gebruikt, zorg er dan voor dat de stekker van het
wisselstroomsnoer uit het stopcontact is getrokken.
Het wisselstroom stopcontact moet dichtbij de eenheid geïnstalleerd worden en makkelijk toegankelijk zijn.
Als de eenheid duidelijk beschadigd is moet u deze nooit op het lichtnet aansluiten of bedienen.
2.2 Water en vocht
Om het risiko op brand en persoonlijk letsel te beperken is het gebruik van dit apparaat buiten en/of
blootstelling aan regen, water of overdadige hoeveelheden vocht uitdrukkelijk verboden.
Het apparaat mag niet worden blootgesteld aan druppels of bespatting en er mogen geen objecten die
gevuld zijn met vloeistoffen, zoals vazen, op het apparaat geplaatst worden.
2.3 Algemeen onderhoud
Forceer schakelaars of externe aansluitingen nooit.
Bij verplaatsing van de eenheid, de seriële poortaansluitingen eerst loskoppelen, dan de voedingskabel en
als laatste de snoeren naar andere apparaten.
Probeer de eenheid nooit met chemische oplosmiddelen of schoonmaakmiddelen in een spuitbus schoon te
maken, omdat dit de eenheid kan beschadigen. Gebruik een schone droge doek.
2.4 Plaatsing
Deze eenheid moet geïnstalleerd worden op een koele droge plaats, uit de buurt van bronnen van extreme
hitte, vibraties, stof, vocht en kou.
2.5 Ventilatie
De sleuven en openingen aan de zijkant van de eenheid zijn voor ventilatie. Zorg er voor dat de eenheid op
een goed geventileerde plek geïnstalleerd wordt zodat deze betrouwbaar werkt.
2.6 Intellectueel eigendom
Sommige IC chips in dit product bevatten vertrouwelijke informatie en/of fabrieksgeheimen. U mag daarom
de inhoud hiervan niet kopiëren, wijzigen, aanpassen, vertalen, verspreiden, nabouwen, of decompileren
12 | P a g e
3
UNPACKING AND INSTALLATION
3.1 Shipping Carton
Your unit will arrive boxed with internal foam inserts for maximum protection during
shipping. You are encouraged to retain the box and all packing material so the unit can be
returned in the unlikely event that repairs should ever become necessary.
3.2 Important Safety Instructions
The AC power cable furnished with the unit should conform to the type in use in your
country. Please compare the plug on your cable with the power socket where the unit will
be installed.
If you did not receive the correct cable, DO NOT attempt to modify it. Instead, immediately
contact your dealer or contact TV One at the sales office nearest to your geographic
location and request the proper cable.
Installation should be made such that the system vents are not blocked by other pieces of
equipment.
3.3 Initial Operation Check Using Factory Default Settings
This product can be operated via multiple methods, but for the purposes of initially
acquainting you with the operation of the unit, this manual will address the operation using
the front panel.
If you have problems using the unit as described below, see the ‘Firmware Update’
description.
13 | P a g e
4
Quick Start
4.1 Overview
Thank you for choosing a tvONE C2 Product. This manual applies to all members of the
C2-2x55 family of products. Depending on the unit you have purchased, you may find that
some of the functionality and I/O connectivity is not supported on the model you have
purchased.
The C2-2855 is a Six Input Universal Scaler/Switcher with an advanced user interface
together with support for a Still Images and a Logo Layer. The C2-2855 has six video
inputs, five video outputs, together with audio in and out via Phoenix connectors and a
3.5mm Line Input.
The tables below illustrate the key differences between the models in the range. The C2-
2855 supports all functionality discussed in this manual, the C2-2655 and C2-2755 support
less I/O connections and less output resolutions.
4.1.1 Input/Output Connectivity
Model
HDMI
In
DVI
-
U
In
YC
In
CV
In
SDI
In
PC/HD
In
HDMI
Out
DVI
-
U
Out
CV
Out
SDI
Out
C2-2855
Universal Scaler PLUS
C2-2755
Video Scaler PLUS
DVI-I
only
C2-2655
Scan Converter PLUS
4.1.2 Output Resolution Support
Model
NTSC
525i
PAL
625i
640x480
60Hz
640x480
67Hz
640x480
72Hz
640x480
75Hz
640x480
85Hz
640x480
117Hz
720x480
59.94Hz
720x576
50Hz
800x600
56Hz
800x600
60Hz
800x600
72Hz
800x600
75Hz
800x600
85Hz
800x600
95Hz
800x600
112Hz
C2-2855
Universal Scaler PLUS
C2-2755
Video Scaler PLUS
C2-2655
Scan Converter PLUS
14 | P a g e
1024x768
59.94Hz
1024x768
60Hz
1024x768
70Hz
1024x768
75Hz
1024x768
85Hz
1024x768
89Hz
1280x720
23.98Hz
1280x720
24Hz
1280x720
29.97Hz
1280x720
30Hz
1280x720
50Hz
1280x720
59.94Hz
1280x720
60Hz
1280x768
60Hz
Rb
1280x768
60Hz
1280x768
75Hz
1280x768
85Hz
C2-2855
Universal Scaler PLUS
C2-2755
Video Scaler PLUS
C2-2655
Scan Converter PLUS
1280x800
60Hz
Rb
1280x800
60Hz
1280x800
75Hz
1280x800
85Hz
1280x960
60Hz
1280x960
72Hz
1280x960
85Hz
1280x1024
60Hz
1280x1024
75Hz
1280x1024
85Hz
1360x768
60Hz
1365x1024
75Hz
1400x900
60Hz
1400x1050
60Hz
Rb
1400x1050
60Hz
1400x1050
75Hz
1600x1200
60Hz
C2-2855
Universal Scaler PLUS
C2-2755
Video Scaler PLUS
C2-2655
Scan Converter PLUS
1680x1050
60Hz
1920x1080i
47.96Hz
1920x1080i
48Hz
1920x1080i
50Hz
1920x1080i
59.94Hz
1920x1080i
60Hz
1920x1080
23.98Hz
1920x1080
24Hz
1920x1080
29.97Hz
1920x1080
30Hz
1920x1080
50Hz
1920x1080
59.94Hz
1920x1080
60Hz
1920x1200
50Hz
Rb
1920x1200
60Hz
Rb
C2-2855
Universal Scaler PLUS
C2-2755
Video Scaler PLUS
C2-2655
Scan Converter PLUS
4.2 Box Contents
1 x tvONE C2-2x55 unit
1 x 12V DC Power Supply Unit and IEC Cable
1 x USB Pen Drive (Contains the user manual and software)
4 x Rubber Feet
1 x Safety Registration Sheet
1 x Product Registration Card
Please upgrade your C2-2x55 with the latest software which can be downloaded from
www.tvone.com/support.
4.3 C2-2x55 Connections
To prepare your unit for first use, plug in the locking Power Supply and connect your
inputs, outputs and (optional) control PC.
15 | P a g e
Note; The unit shown is the C2-2855 – depending on the model you have purchased, some I/O connections may be
missing.
4.4 Menu Overview
The C2-2x55 has three sets of menus:-
Live
Provides end user functionality
Presets, Source Switching
Shortcuts
Provides quick access to user settings
Picture In Picture (PIP) control, Keying,
Freeze, Logo Selection, Source Selection,
Audio Selection
Setup
Used to configure the system settings
Inputs, Outputs, Layers, Presets and
Transitions.
4.5 Setting an Output Resolution
It is possible to select from many output resolutions depending on your model – to access
the output resolution of your choice select it from the Setup/Outputs/Video/Resolution
menu.
4.6 Switching
In normal use the C2-2x55 is controlled using Presets and Source Switching:-
Presets – Pressing the Preset front panel put the C2-
2x55 into Preset Mode. Then press the relevant buttons
marked “1-6” to switch between the Presets.
Sources – Pressing the back arrow in any menu will take
you to the top level menu on the OLED display. Then
navigate to the Live/Primary or Live/Background menu
and press the relevant buttons marked “1-6” to switch
between the sources.
4.7 C2-2x55 Architecture
The C2-2x55 range uses CORIO™ 2.5 technology at its core for control of Inputs, Outputs,
Scaling, Layering, Audio Management, Still Images and Logo Layering.
16 | P a g e
The six video inputs are spread across three gateways into the scaler together with three
output gateways to manage the five video outputs. Using the Universal DVI (DVI-U) Input
and Output additional connectivity is possible directly for DVI-D, DVI-A and via Dongle for
HDMI, PC/HD, CV & YC connection.
Note;
C2-2655 does not support SDI Input. The C2-2755 only supports DVI-I output and does not support SDI, YC and CV
outputs.
Audio Input is possible via Phoenix Connectors (3 x stereo) and also via a 3.5mm Line
Input (1 x Stereo). Audio Output is via Phoenix Connectors (1 x Stereo) or on any format
supporting embedded audio (HDMI, DVI-D + SDI).
Within the CORO 2.5 Scaler it is possible to add Still Images and Logos together with
defining a Back Color.
4.8 Inputs/Outputs
Input
Output
Remarks
HDMI
Yes
Yes
Universal DVI
Yes
Yes
Natively for DVI-D, DVI-A & via Dongle for HDMI, PC/HD, CV & YC*
3G/HD/SD-SDI
Yes
Yes
BNC connector for Broadcast SDI
PC/HD
Yes
No
Connection using HD15 connectors
YC
Yes
Yes
Supports RGB, YUV & YPbPr
CV
Yes
Yes
Phoenix Audio
Yes
Yes
3 Stereo inputs & 1 stereo output (centre pin is Ground)
3.5mm Audio
Yes
No
Stereo line in
* Supports RGB, YUV & YPbPr
4.8.1 Universal DVI
Universal DVI (DVI-U) is a tvONE led standard that uses a series of DVI adaptors to
connect to a wide range of digital and analog signals even those with embedded audio.
17 | P a g e
This gives great flexibility for end users and gives you instant access to additional inputs
and outputs:
Digital: HDMI, DVI-D, DVI-A
Analogue: RGBHV, RGBs, YUV, YPbPr, CV and Y/C
HDMI
Composite Video
PC/HD (RGBHV, RGBs, YUV)
S-Video
Y/C
YPbPr
18 | P a g e
5
Panel Interface
5.1 Panel Overview
The front panel uses a powerful combination of coordinated menus and colored backlit
buttons to immediately indicate the unit state.
All modes can be accessed using the context sensitive, front panel buttons. The buttons
can be used for multiple functions and light up in different colors to indicate the current unit
state.
5.2 Using the C2-2x55
The C2-2x55 is designed to be commissioned using the Setup menus and then used in
Live mode.
In Live mode the numbered buttons are used to select the various
sources.
Alternatively if the Preset button is toggled, the same buttons can be
used to recall Presets.
By pressing and holding the ‘Alt’ Selection button you can quickly access
a Shortcuts menu where the most frequently used menu items can be
easily accessed by the numeric keypad.
The six options are:
1:
Views…
Select the Primary and Background sources, Fullscreen/Picture in
Picture Settings, Genlock, Framelock, Zoom, Size, Opacity, Crop,
Border & Opacity.
2:
Keying
Enables keying as per the Live menu keying settings.
3:
Freeze
Freezes the Primary Video.
4:
Logos…
Enabling Logo layering, Logo Positioning, Opacity, Logo Border.
5:
Source…
Used to change the Primary and Background Sources.
6:
Audio…
Selects the audio input to be embedded on the video output.
19 | P a g e
5.3 OLED Panel Overview
The OLED displayed menu displays a host of useful information on its four line display.
The OLED display shows where you are within the menu
structure and the current set up of the unit.
The current menu position is shown as a dynamic menu tree
with the selected menu shown on the left.
The status indicators shows the current set up of the unit
including layering control, Keying, Freeze and Logo
selection.
When navigating through menus, menus are displayed on
black, light grey or dark grey:
Current Selection
Current menu navigation position
Not selected
5.4 Primary/Background Indicators
On the OLED display there are a number of useful indicators that show the current set up of the
Primary and Background layers.
The current state of the settings on the Primary and
Secondary layers are indicated in the display:
Primary Video Layer Background Video Layer
Full Screen Full Screen & Genlocked
Picture-in-Picture
Hidden & Genlocked
Hidden
Hidden & Frame Locked
Hidden
Light Grey
Dark Grey
Black
20 | P a g e
6
Menu Overview
The system has been designed with a Setup, Live and Shortcut menus.
The Setup menu is typically used by the unit Installer to configure the system settings,
while the Shortcuts and Live menus provide operator functionality:-
Menu
Functions
Setup
System Settings, Inputs, Outputs, Layers, Presets
and Transitions
Live
Preset Recall, Source Selection, Picture-in-Picture
(PIP) Control, Swapping Layers, Audio Routing,
Logo Selection, Image Freezing and Fade to Black.
Shortcuts
Quick access to Views, Keying on/off, Freeze on/off,
Logos, video Source Selection and Audio sources
More information on the menus can be found in later chapters of this manual.
6.1 Layering Control
The C2-2x55 can control
layering of Logo’s, Primary &
Background video and a Color
Field. This adds great flexibility
to simple control of layering and
external referencing.
The Primary Layer can have
Scaling, keying and Aspect
Ratio Correction (ARC) applied.
Using the available layers it is possible use Layer Swapping and Scaling to make changes
using a variety of sources:
Layer
Sources
Layer
Scaling
Visibility
Remarks
Logo
Imported
Logo
Always in front of
other layers
None
available
Either On or Off
Logo imported using
supplied Control Software.
It can be Keyed, Opacity
changed and positioned.
Primary
All Inputs
& Stills
Can be swapped
with Background
Available
Can be Hidden or
Visible
Still images imported using
supplied Control Software.
Can only be displayed in
Primary Layer.
Background
All Inputs
Can be swapped
with Primary
None
Can be Hidden or
Visible
Color Field
User
defined
RGB
Color
Always behind
other layers
None
Always present
but is not seen if
other layers are
selected full frame
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54

tvONE C2-2755 User manual

tvONE
Brand
tvONE
Model
C2-2755
Category
Video switches
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents