2. Concept2
  3. Model D
Model D

Concept2 Model D Reboxing Instructions

  • Hello! I've reviewed the instructions for reboxing the Concept2 C and D Indoor Rowers. The document provides a step-by-step guide on how to disassemble and package your rower using foam blocks for safe transport. I'm here to help answer any specific questions you may have about this process!
  • What tools are needed for reboxing?
    What should be done with the framelock pieces and screws?
    Where should the framelock bag be placed?
REBOXING MODEL C AND D INDOOR ROWER
concept2.com | 800.245.5676 0415
TOOLS NEEDED: 6 lobe driver, packing tape
1
2
3
Remove and disassemble the front legs and the framelock. Package framelock pieces and
screws together in a bag. Place legs as directed and framelock bag inside the foot support
foam block #3 in STEP 4.
Flywheel foam block #1
Foot support
foam block #2
Front foot assembly
Front legs
Cross foam block #4
Foot support foam block #3
Front end and Monorail assemblies
nested together
4
Applies to all Model Cs and Model Ds built before July 31, 2006.
/