C2-2855/2755/2655
Quick Start Guide
tvONE USA
2791 Circleport Drive
Erlanger, KY 41018
USA
Tel 859-282-7303
Fax 859-282-8225
tvONE Latin America
6991 NW 82 Avenue #8
Miami, FL 33166
USA
Tel 305-396-6275
Fax 305-418-9306
tvONE Asia
16F-4, No.75, Sec. 1
Xintai 5th Rd, Xizhi Dist
New Taipei City 22101
Taiwan R.O.C.
Tel +886 2 2698-2296
Fax +886 2 2698-2297
tvONE Europe
Continental Approach
Westwood Industrial Estate
Margate, Kent CT9 4JG, UK
Tel +44 (0)1843 873311
Fax +44 (0)1843 873312
tvONE Mercosur
Av Diaz Velez 3965 PB
Capital Federal (1200)
Buenos Aires, Argentina
Tel +54 11 5917-2525
Fax +54 11 4032-0281
tvONE China
Rm. 1007 Golden Peach Bldg.
No.1900 Shangcheng Road
Pudong, Shanghai
China 200120
Tel +86 21 5830-2960
Fax +86 21 5851-7949
www.tvone.com
The OLED display shows the
location within the menu
structure and current unit setup.
Status indicators show
the current unit setup.
Back button navigates back through menu.
Buttons to navigate and select menu items.
Valid selections are illuminated. Hold ‘ok’ button to save system settings
Buttons 1 - 6 for
Source selection,
Menu items and
recalling Presets
Press and hold
power button
to turn o & on
Toggle to access buttons 7 - 12.
Press and Hold for Shortcuts.
Preset Button
used to toggle
Preset mode
Current Menu
Location.
Active
Selection.
Current Menu Navigation Position.
2
Connect your unit
1 x tvONE C2 device, 1 x 12V DC Power Supply Unit + 1 x IEC cable, 1 x USB Pen Drive (contains the user manual & software), 4 x Rubber Feet, 1 x Safety Information Sheet
1 x Product Registration Card
1
Unpack the contents of the box:
Connect your A/V input devices
and output devices
. Optionally, connect to your network via Ethernet or a local PC via RS232 (required for remote operation, stills and
logo management and firmware updating)
. Finally plug in the locking power supply and apply power to the unit
. The unit will power on automatically.
NB. Your unit may be dierent to the unit illustrated
depending upon the version you have purchased.
PC/HD IN
HDMI IN DVI-U IN
YC IN
YC OUT
HDMI OUTDVI-U OUT
3.5mm
SDI IN
OUT
AUDIO STEREO
A1 A2 A3
SDI OUT
CV IN
CV OUT
ETHERNET12V DC
RS 232
+
-
INPUT CONNECTIONS:
PC/HD (HD15), YC (Mini DIN), CV (BNC), AUDIO (3.5mm & Phoenix Connectors),
HDMI, DVI-U (DVI-D, DVI-A + via adapters HDMI, PC/HD, CV & YC), 3G/HD/SD-SDI (BNC)
SCALED OUTPUT CONNECTIONS:
AUDIO (Phoenix Connectors), CV (BNC),
YC (Mini DIN) DVI-U (DVI-D, DVI-A + via adapters
HDMI, PC/HD, CV & YC), HDMI, 3G/HD/SD-SDI (BNC),
CONTROL & UPLOAD
CONNECTIONS:
ETHERNET, RS232
LOCKING 12V POWER
CONNECTION
Navigation Hints.
Setup
• System
• Sources/Outputs
• Presets
• Layers
• Transitions
Live
• Preset Control
• Source Selection
Your unit can control layering of Logos, Primary & Background video and a Back Color. This adds great
flexibility to simply control layering and external referencing. The Primary Layer can have Scaling, Keying and
Aspect Ratio Correction (ARC) applied.
7
Layering Control
Logos can be imported
using the CORIOcontrol
Software. Logos are
always in front of other
layers. They can be
positioned and their
opacity can be changed.
They cannot be scaled.
Primary Layer can be any input or
still image. This layer can be scaled,
keyed and have Aspect Ratio
Correction applied.
Background Layer can be any video input.
The Back Color is a user
defined RGB color that is
always behind the other
layers. It is always present
but is hidden if other layers
are selected full screen.
Primary Layer
Full Screen
Picture-in-Picture
Hidden
Full Screen & Genlocked*
Hidden & Genlocked*
Hidden & Framelocked†
Logo visible
Primary Freeze on
Keying on
None (Scaler)
Background Layer
7
Status Indicators
8
Genlock* - Output is automatically
set to match the exact Background
Source Width, Height & Frame Rate.
Framelock† - Output is set to a user
defined resolution which must
exactly match the frame rate of the
Background Source (only supported
by some resolutions – see manual)
Live Menu Map
Information on the Setup Menu settings is contained in the manual.
710
6
Changing Output Resolutions
From the HOME menu on the display. Use the cursors to
highlight the ‘Setup’ menu and select it with ‘ok’. Use the
same buttons to navigate to the “Output,” “Video”, and
then “Resolution” menu. Press ‘ok’ to allow you to change
the resolution. Use the and to select the resolution
you require. Press ‘ok’ to confirm your selection.
The factory default is 1280x720p 60Hz.
Note: Setting the Output Resolution only works when
Live\Background\View Mode is set to “None (Scaler)”.
3
4
Switching Sources
From the HOME menu on the display. Use the cursors to
highlight the ‘Live’ menu and select it with ‘ok’. Use the
same method to navigate into either the “Primary” or
“Background” menus.
Select your video
source using either
the ,
and
‘ok’ buttons or the
accelerator buttons 1-6.
Press to navigate
back up the menu tree.
5
Changing View Mode
From the HOME menu on the display. Use the cursors to
highlight the ‘Live’ menu and select it with ‘ok’. Use the
same method to navigate into either the “Primary” or
“Background” and then “View” menu. The Primary source
can be either Full Screen (default), PIP (Picture-In-Picture)
or Hidden.
The Background source can be Full Screen, Hidden
- note this effects the output resolution, or None
meaning the unit operates as a Scaler.
Menu Overiew
Your C2 unit has 3 sets of Menus:
LIVE
The LIVE menu set provides operator functionality and is
used for Preset Recall, Source Selection, Picture-in-Picture
(PIP) Control, Swapping Layers, Keying, Audio Routing,
Logo Selection, Image Freezing, Transition Selection.
SETUP
This menu set is used to configure System settings,
Inputs, Outputs, Layers, Presets and Transitions.
SHORTCUT
This menu is used to access all operational shortcuts.
Presets
To Recall a Preset press then press a “1 - 6” button.
To Capture a Preset press then press & hold a “1 - 6” button.
To Delete a Preset press , then press & hold a “1 - 6” button for longer than Capture.
To Load the Default Preset press & hold the Preset Button
To Access Presets 7 - 12 toggle the ALT button and use buttons “1 - 6”
Navigation
To exit a menu press the Back Button
Saving
To Save Current Settings, press & hold the ‘ok’ button until the unit acknowledges
with “Settings Saved”.
Reset
To Reset Settings press the ‘ok’, Back & Power buttons
together for 5 seconds. Reset Settings does not affect
Presets, Still images or Logos already saved to the unit.
Panel Lock
To Lock/Unlock the Panel press and together.
Shortcut Menu
The Shortcut Menu accesses frequently used menu items either through the menu or
numeric pad. To go to it press & hold the ALT button .
Shortcut options are: 1 - Views, 2 - Keying, 3 - Freeze, 4 - Logos, 5 - Source and 6 - Audio.
9
Panel Shortcuts
Live - Primary - View - Fullscreen
• • - PIP
• • - Hidden
• - DVI-U
• - HDMI
• - SDI
• - PC/HD
• - YC
• - CV
• - Still #1 - #5
- Background - View - Fullscreen (Genlock)
• • - Hidden - Framelock
• • • - Genlock
• • - None (Scaler)
• - DVI-U
• - HDMI
• - SDI
• - PC/HD
• - YC
• - CV
- Audio - DVI-U
• - HDMI
• - SDI
• - Follow Primary
• - Follow Background
• - Mute
• - A1
• - A2
• - A3
• - 3.5mm
- Layer Order - P/B (Primary in front of Background)
• - B/P (Background in front of Primary)
- Keying - On
• - Off
- Freeze - On
• - Off
- Presets - Load Default
• - None
• - #1 - #12
- Logo - None
• - #1 - #5
- Transition - <choose effect>
Shortcut
• View
• Keying
• Freeze
• Logos
• Source
• Audio
-
1
-
2
tvONE C2-2855 Quick start guide
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
TV One MX-3141PCA User manual
-
TV One C2-1000 Series Specification
-
TV One 1T-C2-100 Specification
-
Analog way Saphyr-H User manual
-
-
-
-
AV TOOL AP-411 User manual
-
TV One 1T-VS-558 User manual
-
Barco E2-Tri-Combo User guide
