QUICK START GUIDE
Remote
Control
Please read these instructions completely
before operating this product.
Model: AHSS21
Home Security Anytime from Anywhere
Quick
Simple
Set Up
ACCESSORY
Compatible with ALC AHS613, AHS616, and
AHS629 Security Systems
Operation
u
When first turning on the app you will enter the Control Hub (or
System Name you gave) Selection window. Simply tap your
Control Hub to enter.
v
The Status screen will appear. Here
you can control the connected
devices as well as access the
Scenario, Event and Setting’s
screens.
w
To change the Remote button
operation: Tap the Remote Control
icon and then an icon below to
activate the respective function
corresponding to the buttons on
the remote control. Note that the
button operation can be changed,
see the owner’s manual.
SCAN
TO VIEW
COMPLETE
USER’S GUIDE
This Remote Control is an accessory to be used along with the
Connect series Control Hub Kit. For detailed installation and
setup and to view the ALC 1 Year Limited Warranty, please refer
to the complete Connect Series User’s Guide available on our
website: www.ALCWireless.com/support
Pairing Pairing
IMPORTANT: This device needs to be paired with the Control
Hub as follows.
x
Press and hold the Armed Stay
button on the Remote Control
until the blue LED blinks.
y
Tap Pair to start the Pairing
process. Follow the on screen
instructions.
At the final screen, enter the
sensor’s name and location
and tap Save.
u
Since this device is an added accessory,
you should have downloaded the Connect
App and installed the ALC Control Hub as
described in the Connect Series owner’s
manual.
v
At the Status screen, tap +.
w
Remove the insulating plastic tab, then tap Remote Control.
Trouble Pairing?
If it did not detect the remote, press and hold the Armed Stay
button again on the Remote Control until the blue LED blinks.
and then repeat step 5.
/
