NEC N8405-044F User guide

Read this guide carefully before using this product.

Always keep this guide handy so that you can refer to it when necessary.

Safety Precautions

Refer to the User’s Guides of the equipment that uses this product.

CAUTION / WARNING Labels

The caution / warning label is attached to components with possible danger or

their vicinity in your product to inform the user that a hazardous situation may arise

when operating the product. (Do not intentionally remove or damage any of the

labels.) Refer to the User’s Guides of the equipment that uses this product for

details.

1. Components

The package contains the components listed in the table below. Make sure that all the

components are provided. If you find any missing or damaged component, contact your sales

representative.

Name

Qty.

Remarks

Power Unit

User’s Guide

This guide

2. Installation

Refer to the User’s Guides of the equipment that uses this product.

Insert this product slowly into the blade enclosure.

IMPORTANT

 This product can only be installed on N8405-040F: the blade

enclosure (SIGMABLADE-Hv2).

3. Cleaning/Maintenance, Repair, Transfer to a Third Party and Disposal

Refer to the User’s Guides of the equipment that uses this product.

N8405-044F Power Unit

User’s Guide

*855- 900724- - A9*

456-01784-000

PN# 456-01784-000