NEC N8405-051 User guide

Page is loading ...

11

Keep this User's Guide handy for quick reference when necessary.

N8405-051 Front Bezel

User's Guide

855-900694- A

456-01782-000

1st Edition, July 2008

Preface

Congratulations for your purchase of the N8405-051 Front Bezel.

The User’s Guide is intended to allow you to install the N8405-051 Front Bezel (called the bezel hereafter)

correctly and safely. Read this guide thoroughly before handling the bezel. In addition, refer to this guide

whenever you want to know how to use the bezel or some malfunction occurs. Always keep this guide

handy so that you can refer to it when necessary. Refer to the User’s Guides of the equipment that uses

this product for more information.

Read "Notes on Use" carefully before handling the bezel.

NOTE:

Read this manual carefully before using the unit. Keep this manual nearby as a handy reference and refer

to the “CAUTION” and “WARNING” statements whenever necessary. Read this guide carefully before using

this product.

12

NOTES ON USE - Always read the Notes -

The following includes information necessary for proper and safe operation of the bezel.

Observe the following precautions to use the Front Bezel correctly and safely. For safety symbols, refer to

the User's Guide of the Blade Enclosure.

WARNING

N8405-051 Front Bezel is an option dedicated to N8405-040 SIGMABLADE-Hv2.

Do not install this bezel to any other enclosure.

Failure to follow this instruction may cause a personal injury or damages of

surrounding devices to occur.

Pay attention for personal injury when installing the bezel to Blade Enclosure.

Never attempt to disassemble, repair, or alter this bezel on any occasion. Failure to

follow this instruction may cause a personal injury as well as damages of this bezel

and surrounding devices.

About This Manual

This guide describes how to install N8405-051 Front Bezel correctly. Read this guide thoroughly before

using the bezel, and store it in a safe place for future reference. When transferring the bezel, always attach

this guide to the bezel.

Text Conventions

The following conventions are used throughout this User's Guide. For safety symbols, refer to the User's

Guide of the Blade Enclosure.

Notice

Items to be observed or points to be

noted when handling the bezel

Tips

Information useful or convenient for

you

Check

Items to be checked when handling

the bezel

13

In the Package

The shipping carton contains various accessories, as well as the bezel itself. See "1. Components" to make

sure that you have everything and that individual components are not damaged. If you find any component

missing or damaged, contact your service representative.

Transfer to Third Party

Make sure to provide this guide and all the accessories along with the product to a third party.

Transportation

To transport the product, remove the product from the Blade Enclosure and put it in the shipping carton

along with accessories according to "1. Components" described later.

Disposal

Follow the ordinances -recycling and waste disposal- by your local government when you are disposing the

card. Contact the local government for more information.

Notes

(1) No part of this manual may be reproduced in any form without prior written permission of NEC

Corporation

(2) This manual might be revised without any announcement in the near future.

(3) The contents of this manual shall not be copied or altered without prior written permission of NEC

Corporation

(4) All efforts have been made to ensure the accuracy of all information in this manual. If you find any part

unclear, incorrect, or omitted in this manual, contact the sales representative where you purchased this

product.

(5) NEC assumes no liability arising from the use of this product, nor any liability for incidental or

consequential damage arising from the use of this manual regardless of (4) above. Contact NEC sales

representative before disposal, collection or recycle of the device.

14

1. Components

The package contains the components listed in the table below. Make sure that all the components are

provided. If you find any component missing or damaged, contact your service representative.

Name

Qty

Remarks

Front Bezel

1

User's Guide

1

This guide

Fixing screw (M3)

10

Screws to secure the bezel to Blade Enclosure

(including spares)

Security key

2

Guide bracket

1

Hinge cover

1

Hook

1

Cover(right)

1

Cover(left)

1

Warranty

1

This warranty is available only for using in Japan.

Do not use it in any other country than Japan.

15

2. Installation

Follow these steps to install the bezel on the Blade Enclosure.

１. Install the left and right covers on the Blade Enclosure with screws. (two each on the right

and left sides, total four)

Cover （left）

Cover （right）

2 screws

(Fix on cover (left))

Close-up (left)

Close-up (right)

2 screws

(Fix on cover (right))

16

２. Install the hinge cover on the Blade Enclosure by using four fixing screws (M3).

Hinge cover

4 fixing screws (M3)

17

３. Install the Front Bezel on the Blade Enclosure by using two screws.

2 screws

(Fix on hinge cover)

Front Bezel

18

４. Install the guide bracket and the hook on the Blade Enclosure by using each two fixing screws (M3).

Guide bracket

Close-up

See this illustration to check

the locations and directions

they should be installed.

Hook

2 fixing screws (M3)

19

５. Lock the Front Bezel with the security key, if you need.

Notice

Keep the security key in safe place.

N8405-051

Front Bezel User’s Guide

F

Unlock

Lock

*855- 900694- - AF*

456-01782-000

PN# 456-01782-000

NEC N8405-051 User guide

NEC N8405-051 User guide

in other languages

Related papers

Other documents