Zebra Technologies ZM400 User manual

Category
Label printers
Type
User manual

This manual is also suitable for

ZM400/ZM600
Product Guide - EMEA 1 May 2007
Z Series
ZM400
/ZM600
Thermal Bar Code Printer
Product Guide
ZM400/ZM600
Product Guide - EMEA 2 May 2007
© 2007 ZIH Corp.
This document and the information contained therein is the confidential and
proprietary information of Zebra, and may not be distributed without the express
written permission of Zebra.
ZebraLink and all product names and numbers are trademarks. Zebra, the Zebra
Head logo, ZPL, ZPL II, Stripe, Z Series are registered trademarks of ZIH Corp.
All rights reserved worldwide.
Product and company names mentioned in this document may be trademarks of
their respective owners.
All competitor product information is gathered from public sources at the time of
publication. It has not been verified or tested by Zebra.
ZM400/ZM600
Table of Contents
Product Guide - EMEA 3 May 2007
ZM400/ZM600 Thermal Bar Code Printer
Product Guide
Table of Contents
May 2007
I. INTRODUCTION........................................................................................................... 4
Positioning Summary....................................................................................................... 5
II. TARGET MARKETS AND APPLICATIONS............................................................. 6
III. PRINTER TOUR WITH KEY BENEFITS................................................................. 8
IV. TYPICAL USER/HOW TO SELL........................................................................... 12
V. INTERNAL COMPARISON ..................................................................................... 15
ZM400 vs. Stripe S600.................................................................................................. 15
ZM400 vs. 2746e............................................................................................................ 16
ZM400 vs. S4M............................................................................................................... 17
ZM400 vs. Z4Mplus ....................................................................................................... 18
ZM400 vs. 110XiIIIPlus ................................................................................................. 19
ZM600 vs. Z6Mplus ....................................................................................................... 20
ZM600 vs. 170XiIIIPlus ................................................................................................. 21
VI. ZEBRA ADVANTAGE.............................................................................................. 22
VII. Q & A......................................................................................................................... 24
VIII. APPENDIX A (ZM400).......................................................................................... 26
IX. APPENDIX B (ZM600)............................................................................................ 30
ZM400/ZM600
Introduction
Product Guide - EMEA 4 May 2007
I. INTRODUCTION
The Best in Class Just Got Better
Price-competitive, rugged Z Series metal printers have always been the price-
performance leaders in their class. Offering 10-inches-per-second print speed,
fast throughput, and rugged reliability, these industrial/commercial workhorses
enhance productivity in a wide range of warehouse, manufacturing, and business
applications. Now, the ZM400™ and ZM600™ printers offer more options to
meet an even wider array of applications and needs.
Better Connected for a Connected World:
Better connected to your customer’s network—with a variety
of modern connectivity options for easy integration into any
network environment: USB 2.0, secure 802.11b/g wireless
LAN, or ZebraNet® 10/100 Print Server that allows
simultaneous parallel and Ethernet connectivity.
Better connected to your customer’s applications—with built-
in RFID Ready investment protection, choice of print
resolution including 600 dpi, ink side coated in or out ribbon
spindles, and XML-enabled printing.
Better connected to your customer’s needs—with easy setup
via a large, easy-to-read, operator friendly front panel that
includes Asian-language support; easy loading of supplies;
and easy maintenance with quick-changing printheads and
platens.
Versatile:
Paired with performance-matched Genuine Zebra Supplies for optimal printing
performance, the hardworking ZM400 and ZM600 are perfect for many industries
and applications, including:
Work in process Shipping/receiving
Order fulfillment Compliance labeling
Distribution Warehouse management
Transportation/Logistics Pharmacy/healthcare
ZM400/ZM600
Positioning Summary
Product Guide - EMEA 5 May 2007
Positioning Summary
Fast Print Speed and Quick Throughput: The ZM400/ZM600 printer’s ability
to print fast and print a lot of labels for a long time means these printers
can keep up with the needs of the fastest production lines.
Metal Frame and Case
: The rugged construction of the ZM400/ZM600 printer
makes it suitable for a variety of operating environments.
Multitude of Optional Features & Flexibility:
Connectivity: While parallel, serial and USB 2.0 connectivity are
standard, these printers also support internal 10/100 Ethernet and
802.11b/g wireless Ethernet. In addition, using Ethernet no longer
requires the sacrifice of the parallel port.
Media handling: These printers can be use in a variety of ways,
including tear-off, peel and present (with and without liner take-up),
full roll rewind for batch operations, and cut mode.
Programming Language, Memory & Fonts: Of course, these new
printers support Zebra’s ZPL programming language, which is
Unicode™ compliant, and with the addition of optional memory &
fonts, are ready for any global printing needs. The ZM400/ZM600
printers also support Zebra’s EPL programming language as well
as its XML programming solution. They also supports ZebraLink
APL technology, allowing the printer to adapt to legacy Intermec
environments (APL-I
) or Datamax environments (APL-D
).
Most Applications: Like its legacy replacements, the Z4Mplus and Z6Mplus
printers, the new ZM400/ZM600 printers are designed to fit into most
applications seamlessly and effortlessly.
Price-Performance Leaders
: The ZM400/ZM600 printers are backed with
many standard features as well. A large, easy-to-read LCD display that
handles 16 different languages (including Japanese, Chinese & Korean),
USB 2.0 connectivity, and RFID-Ready for future-proofing your
investment are just some of the many.
The ZM400 and ZM600 combine fast print speed, quick throughput and a
high duty cycle into a rugged full-sized metal printer designed to enhance
productivity. In addition, the Z Series printers’ multitude of optional
features and flexibility allow it to support most warehouse and business
applications. The Z Series Thermal Printers are commercial/industrial
workhorses that are the price-performance leaders in their class.
ZM400/ZM600
Applications and Target Markets
Product Guide - EMEA 6 May 2007
II. TARGET MARKETS AND APPLICATIONS
Given all the standard and optional features available on the ZM400 and ZM600
printers, they are well suited for most applications and vertical markets. Here are
just a few:
Market Segments Example Applications
Manufacturing
Automotive
Electronics
Aerospace
Commercial Products
Engineering/Industrial Design
Inventory Control
Shipping/Receiving
Order Entry
Part Labeling
Work in Progress
Document Identification
Logistics
Distribution
Warehousing
Third Party Logistics
Pallet/Carton/Product Labeling
Shipping/Receiving Labels
Inventory management
Shelf Labeling
Cross-docking labels
Shipping Labels
Transportation and Ticketing
Parcel Delivery
Public Transportation
Concert/Sporting Events
Trains/Airlines
Asset Tracking
Shipping/Receiving
Ticketing
Baggage Handling
Receipt Printing
ZM400/ZM600
Applications and Target Markets
Product Guide - EMEA 7 May 2007
Healthcare
Hospitals and Clinics
Laboratories
Pharmacies
Medical Instrument Suppliers/Service
Managed Care Facilities
Back Office
Patient ID
Blood Bag Labeling
Pharmaceutical Labels
Specimens Labelling
Document management
Patient File Labels
Prescription Labeling
Postal
Postal Tracking
Sorting
Parcel/Baggage/Package Route
Offices
Product/Services
Law Firms/Insurance Agencies
Lead Fulfillment/Mailroom
Satellite Office Locations
Document/Labor/Parcel Tracking
Record/Mailing Labels
Document Identification
Government
Defense
Vehicle Licensing
Law Enforcement
Police
Asset Tracking
Warehouses
Inventory Management
Document management
Driver Records
ZM400/ZM600
Applications and Target Markets
Product Guide - EMEA 8 May 2007
III. PRINTER TOUR WITH KEY BENEFITS
Feature Benefit
LCD Display
Large, easy-to-read display means less support
requirements with a quick setup time
Easy to make adjustments or to configure the printer
16 languages for truly global use
New support for Japanese, Chinese and Korean
10/8/4 ips Print
Speed
Industry leading print speed and throughput in its class
10 ips @ 203 dpi, 8 ips @ 300 dpi, and 4 ips @ 600 dpi
Print Resolution
Support for 203, 300 and 600 dpi
Flexibility to accommodate application needs
Field-changeable resolution options
4” 600dpi (available on ZM400 only)
Large Media
Window
Monitor ribbon and media minimizing downtime
Improves customer efficiency and productivity
Metal Enclosure
Low total cost of ownership
Reliability and dependability in various operating
environments
Zebra Reliable
Zebra Dependable
Reduced downtime means improved productivity
Lower cost of ownership
Easy-to-Use
Control
Panel
LCD
Display
10/8/4 ips
Print Speed
Metal
Enclosure
Large Media
Window
203, 300, 600 dpi
Print Resolution
ZM400/ZM600
Printer Tour with Key Benefits
Product Guide - EMEA 9 May 2007
Feature Benefit
Thermal Transfer
Ribbon Handling
System
Fits into both direct thermal and thermal transfer
applications
Produce more durable and longer lasting images on a
wide variety of thermal transfer media
450 Meter Ribbon
Supply
Reduces downtime by supporting a 3 to 1 media to
ribbon ratio
8” Roll Capacity
Reduces downtime by supporting full size media roll
Collapsible Take-Up
Spindle
Quick and easy ribbon change
No need to buy or save ribbon cores
Programming
Languages
Supported: ZPL,
EPL, APL-I, APL-D,
XML
No need to switch from existing language
Easy to convert to Zebra printer without changing code
XML Support for direct connect to popular ERP
systems such as Oracle WMS.
450 meter
Ribbon Supply
8” Roll
Capacity
Thermal
Transfer
Ribbon
Handling
System
Collapsible
Take-Up
Spindle
ZM400/ZM600
Printer Tour with Key Benefits
Product Guide - EMEA 10 May 2007
Feature Benefit
Movable transmissive
and a fixed reflective
sensor standard
Ability to sell into a wide variety of applications
Handles all types of gap, notch and black mark
media
Peel, Full Roll Rewind,
Liner Take-up and
Cutter options
Media handling options to meet most applications
Increase productivity
Side-loading design
with cantilevered
printhead
Media and ribbons are easy to load
Reduces training and support requirements
Auto-calibration
Automatically adjusts to any size label
Minimizes waste
Real Time Clock
Ability to add a date or time stamp when required
Fits into many applications
Quick Change Platen
Simplifies and reduces maintenance costs
Supports Ribbon
coated-in or coated-out
(Coated-in available on
ZM400 Only)
Can selected the type of spindle that matches
current supplies
Provides ideal “drop-in” compatibility with Datamax
Prodigy when used with Zebra’s APL-D.
RFID Ready
Adaptable to grow with changing application needs
Upgradeability provides initial investment protection
Movable Transmissive
Sensor and Fixed
Reflective Sensor
Quick Change
Platen
Side-loading design
with cantilevered
printhead
RFID Ready
Peel, Liner
Take-up,
Rewind and
Cutter Options
Spindles for
Ribbon ink side
in or ink side
out available
ZM400/ZM600
Printer Tour with Key Benefits
Product Guide - EMEA 11 May 2007
Feature Benefit
Fanfold Slot
Multiple media feed path options provide supplies
and application flexibility.
Parallel, USB 2.0 and
Serial Standard
Optional Internal 10/100
Ethernet and 802.11b/g
Wireless
Simultaneous use of
Parallel and Ethernet
Provides flexible connectivity options
Easy to integrate into a variety of
communications environments
Connect to multiple hosts or sources
Plug n’ Play compatibility
with Windows
Easy to set up the printer
ZebraLink™ Solutions
(ZPL Only)
User can control and monitor printer remotely
64 MB Flash Option
Improve performance with ability to store formats,
fonts and graphics directly on printer
DB-9 Serial port
802.11 b/g radio
slot (optional)
Power
Fanfold Slot
IEEE Parallel
Port
USB 2.0
10/100 Int. Ethernet
(optional)
ZM400/ZM600
Typical User/How to Sell
Product Guide - EMEA 12 May 2007
IV. TYPICAL USER/HOW TO SELL
When should I sell or recommend a ZM400 or ZM600 thermal printer?
When the user wants one or more of the following:
Minimal printer downtime
o Metal frame and case enclosure provide a rugged and reliable
printer with minimal downtime
o Quick and easy platen and printhead replacement
o Large LCD Screen for quick printer set-up
o Side-loading printhead design for quick and easy loading media
and ribbon
A thermal printer designed for world-wide applications
o Fully Unicode compliant
o LCD menu commands in 16 languages
o Compatible with ZebraNet Bridge Enterprise
The ability to easily adapt should your application needs change
o Cutter option
o Field changeable printhead resolutions (dpi)
o 8-inch diameter rewind
o RFID printer encoding
o 300dpi or 600dpi print resolution
o Peel-N-Present
o RFID printing and encoding
Variety of ways to connect to the host system
o USB 2.0
o 802.11 b/g wireless
o ZebraNet 10/100 PrintServer Ethernet
o Serial & Parallel Ports
Minimize time to print a single label
o Fast 10 inches-per-second print speed
o Fast throughput
o Parallel and Ethernet simultaneous connectivity
The printed image needs to last for months to years
o Variety of Zebra media and ribbons to meet application needs
o ZM400 and ZM600 are capable of handing most media types
To replace a Datamax Prodigy/Prodigy Plus or an Intermec 3400d without
changing formats by utilizing Zebra’s Alternative Programming Languages
To upgrade their desktop, Stripe S600, or S4M printer to a higher volume
printer with upgradeable options.
ZM400/ZM600
Typical User/How to Sell
Product Guide - EMEA 13 May 2007
How the ZM400 and ZM600 thermal printer compare to Zebra’s other printer
products.
Designed to enhance productivity, the versatile and cost effective ZM400
and ZM600 thermal printers provide the features, options, and performance that
make them suitable for all but the most demanding applications. Both are sturdy
full-size printers with rugged metal cases and frames that deliver fast print
speeds, rapid throughput, and high duty cycles. The ZM400 and ZM600
represent the price-performance leaders in their class. This combination makes
the ZM400 and ZM600 the ideal printers for most warehouse, industrial, and
business applications.
The inexpensive S4M is another robust 4-inch printer sporting a sturdy
metal frame and case. While the S4M offers the same durable construction as
the ZM400, its smaller feature and option set delivers slightly less performance
than the ZM400. The S4M represents the ideal low cost printer for many basic
industrial commercial printing applications.
With its practical basic feature set, precision operation, reputation for
reliability, and top-of-the-line all metal construction, the dependable 105SL
thermal printer is a stalwart commercial / industrial workhorse suitable for both
the precision printing of small labels as well as heavy duty industrial / commercial
printing in most common applications.
The full featured XilllPlus printers are Zebra’s flagship printers designed to
optimize high performance printing in all applications. The XilllPlus printers
feature all-metal construction throughout. The XiIIIPlus printers boast a full metal
case, frame, and precision machined metal spindles to deliver the ultimate in
durability and long life high speed printing precision. These designs consistently
deliver the highest reliability, performance, quality, and precision printing
available, even when positioned in the harshest of industrial environments. The
Xilllplus is able to hold tight registration on all types of media, including the slick
synthetic medias commonly found on electronic circuit boards. The XilllPlus are
totally uncompromised in their design and are perfectly positioned for 24/7 duty in
mission-critical environments.
ZM400/ZM600
Typical User/How to Sell
Product Guide - EMEA 14 May 2007
The following chart will help to qualify the ZM400/ZM600 printers as the
correct choice for a solution.
S4M ZM400/ZM600 XilllPlus
Metal
4” print width only
Metal
4” & 6” print width
Full-Metal
4”, 6” and 8” print
widths
6 ips Max Print Speed
10 ips Max Print
Speed
12 ips Max Print Speed
Printing for many
applications
Printing for most
applications
Printing for all
applications
Wide Range of
Connectivity Options
Wide Range of
Connectivity Options
Wide Range of
Connectivity Options
No RFID
RFID Ready
RFID Ready
RFID Enabled
Outstanding value
printer for budget
minded consumers
Price-Performance
Leader delivering
application flexibility
Peak Performance
Printer for mission-
critical, 24/7
applications
ZM400/ZM600
Competitive Comparison
Product Guide - EMEA 15 May 2007
V. INTERNAL COMPARISON
ZM400™ Stripe® S600
Printer Features
Print Width, max. 4.09” (104mm) 4.09" (104mm)
Dots/Inch 203/300/600 203 dpi
Max Print Speed 10 ips (254mm/s) 6 ips (152mm/s)
Standard RAM 16MB 2 MB
STD Flash Memory 8MB 1 MB
Media Features
Label Width, max. 4.5” (114mm) 4.5” (114mm)
Label Width, min. 1.0” (25.4mm) 0.75” (19.4mm)
Label Length, max 39.0” (991mm) 39” (991mm)
Label Length min.
0.5” (12.7mm)
Tear/Peel/Rewind,
1.0” (25.4mm) Cut.
0.63” (16.0mm) Tear
1.0” (25.4mm) Peel
Roll Size, O.D. & Mounting 8.0” (203mm) 8.0" (203mm)
Max Ribbon Length 1476’ (450m) 1476’ (450m)
Interface
Serial Std Std
Parallel Std Std
Ethernet 10/100 Opt N/A
USB 2.0 Interface Std N/A
Wireless 802.11b/g Opt N/A
Other
Ribbon Coated Inside or Outside Outside
Media and Ribbon Window Std N/A
Field Upgradeable Printhead Yes N/A
RFID Ready Std N/A
Full Roll Rewind Opt Partial Only
Cutter Opt Opt
Media Supply Spindle No No
Quick Change Platen Roller Std No
Real Time Clock Std N/A
Printer Languages
ZPL, EPL, APL-I,
APL-D, XML
ZPL
LCD Display 240 x 128 (pixels) None
Weight 32.4lbs (15kg) 17lbs (7.7kg)
Size (H x W x L)
13.3” x 10.9” x
18.7” (338mm x
278mm x 475mm)
13” x 8.2” x 17”
(330mm x 210mm x
432mm)
ZM400 vs. Stripe S600
While the S600 printer is
made entirely of plastic,
the ZM400 printer is
more robust containing
a metal frame and case
ideally suited for many
applications, including
product ID, receiving,
shipping, and
compliance labeling.
The ZM400 printer
offers a larger selection
of connectivity options
than the S600, including
internal Ethernet and
wireless.
The ZM400 printer has
a much faster print
speed and duty cycle
than the S600.
The footprint of the
ZM400 printer, while
slighter larger than the
S600 is still small
enough to be a good fit
for certain space
constrained
environments such as
mobile carts.
The ZM400 printer’s
LCD and quick change
platen offer quicker
setup time and easy
maintenance resulting in
more time to print labels
and be productive.
ZM400/ZM600
Internal Comparison
Product Guide - EMEA 16 May 2007
ZM400™ 2746e
Printer Features
Print Width, max. 4.09” (104mm) 4.09" (104mm)
Dots/Inch 203/300/600 203 dpi
Max Print Speed 10 ips (254mm/s) 6 ips (152mm/s)
Standard RAM 16MB 512KB
STD Flash Memory 8MB 1MB
Media Features
Label Width, max. 4.5” (114mm) 4.5" (114mm)
Label Width, min. 1.0” (25.4mm) 1.12" (29mm)
Label Length, max 39.0” (991mm) 22" (559mm)
Label Length min.
0.5” (12.7mm)
Tear/Peel/Rewind,
1.0” (25.4mm) Cut.
.38” (9.7mm) Tear
.5” (12.5mm) Peel
1.0” (25.4mm) Cutter
Roll Size, O.D. & Mounting 8.0” (203mm) 8.0" (203mm)
Max Ribbon Length 1476’ (450m) 1160' (360m)
Interface
Serial Std Std
Parallel Std Std
Ethernet 10/100 Opt 10 Base-T Opt
USB 2.0 Interface Std USB v1.1
Wireless 802.11b/g Opt None
Other
Ribbon Coated Inside or Outside Outside
Media and Ribbon Window Std Std
Field Upgradeable Printhead Yes No
RFID Ready Std No
Full Roll Rewind Opt
Std Liner Take-up
only
Cutter Opt Opt
Media Supply Spindle No No
Quick Change Platen Roller Std No
Real Time Clock Std Opt
Printer Languages
ZPL, EPL, APL-I,
APL-D, XML
EPL
LCD Display 240 x 128 (pixels) None
Weight 32.4lbs (15kg) 28.6 lbs (13 kg)
Size (H x W x L)
13.3” x 10.9” x
18.7” (338mm x
278mm x 475mm)
12.38" x 9.5" 16.75"
(314mm x 241mm x
425 mm)
ZM400 vs. 2746e
The ZM400 printer’s front
control panel features a
streamlined menu for
simple navigation, while
its proven side-loading
design eliminates label
and ribbon threading for
quick, easy loading.
Built with the ruggedness
of a metal enclosure and
die-cast frame, the ZM400
offers Zebra quality and
reliability at a competitive
price.
The ZM400 printer offers
much faster print speed
and throughput than the
2746e (10 ips vs. 6 ips).
The ZM400 printer offers
a larger selection of
connectivity options than
the 2746e, including
wireless.
The ZM400 printer is easy
to integrate in existing
applications as it operates
in EPL, as well as ZPL,
APL-D and APL-I.
ZM400/ZM600
Internal Comparison
Product Guide - EMEA 17 May 2007
ZM400™ S4M
Printer Features
Print Width, max. 4.09” (104mm) 4.1" (104mm)
Dots/Inch 203/300/600 203/300 dpi
Max Print Speed 10 ips (254mm) 6 ips (152mm)
Standard RAM 16MB 8MB
STD Flash Memory 8MB 4MB
Media Features
Label Width, max. 4.5” (114mm) 4.5" (114mm)
Label Width, min. 1.0” (25.4mm) 0.75" (19.4mm)
Label Length, max 39.0” (991mm) 39" (991mm)
Label Length min.
0.5” (12.7mm)
Tear/Peel/Rewind,
1.0” (25.4mm)Cutter
0.7" (17.8mm) Tear,
0.5" (12.7mm) Peel.
Roll Size, O.D. & Mounting 8.0” (203mm) 8" (203mm)
Max Ribbon Length 1476’ (450m) 1476' (450m)
Interface
Serial Std Std
Parallel Std Std
Ethernet 10/100 Opt 10/100 Opt
USB 2.0 Interface Std USB v1.1 Std
Wireless 802.11b/g Opt 802.11b/g Opt
Other
Ribbon Coated Inside or Outside Outside
Media and Ribbon Window Std Std
Field Upgradeable Printhead Yes Yes
RFID Ready Std No
Full Roll Rewind Opt No
Cutter Opt No
Media Supply Spindle No No
Quick Change Platen Roller Std No
Real Time Clock Std Opt
Printer Languages
ZPL, EPL, APL-I,
APL-D, XML
ZPL, EPL, APL-I,
APL-D,
LCD Display 240 x 128 (pixels) 2 x 14
Weight 32.4lbs (15kg) 27.2 lbs (12.4 kg)
Size (H x W x L)
13.3” x 10.9” x 18.7”
(338mm x 278mm x
475mm)
11.7" x 10.7" x 18.8"
(295mm x 272mm x
477mm)
ZM400 vs. S4M
Both the ZM400 and the
S4M printer are reliable,
metal printers ideally
suited for many
applications, including
product ID, receiving,
shipping and compliance
labeling.
While both printers offer
setup via an LCD display,
the display on the ZM400
is larger, easier to read
and offers Asian language
support.
The S4M printer has a
lower duty cycle than the
ZM400, but much higher
than that of a LP/TLP
2844. The S4M is the
ideal printer for
applications that need
more than a desktop yet
don’t need the
horsepower of a ZM400.
The ZM400 printer offers
significantly faster print
speeds and thus faster
throughput for batch
printing and other high
speed applications.
The ZM400 printer offers
greater application
flexibility with regard to
Media handling and
resolution, supporting
options such liner take-up,
full media rewind, cutter
and 600 dpi.
ZM400/ZM600
Internal Comparison
Product Guide - EMEA 18 May 2007
ZM400™ Z4Mplus
Printer Features
Print Width, max. 4.09” (104mm) 4.09" (104mm)
Dots/Inch 203/300/600 203/300 dpi
Max Print Speed 10 ips (254mm) 10 ips (254mm)
Standard RAM 16MB 8MB
STD Flash Memory 8MB 4MB
Media Features
Label Width, max. 4.5” (114mm) 4.5" (114mm)
Label Width, min. 1.0” (25.4mm) 1.0" (25.4mm)
Label Length, max 39.0” (991mm) 39.0" (991mm)
Label Length min.
0.5” (12.7mm)
Tear/Peel/Rewind,
1.0” (25.4mm)Cutter
0.5” (12.7mm)
Tear/Peel/Rewind,
1.0” (25.4mm)Cutter
Roll Size, O.D. & Mounting 8.0” (203mm) 8.0" (203mm)
Max Ribbon Length 1476’ (450m) 1476' (450m)
Interface
Serial Std Std
Parallel Std Std
Ethernet 10/100 Opt 10/100 Opt
USB 2.0 Interface Std No
Wireless 802.11b/g Opt 802.11b Opt
Other
Ribbon Coated Inside or Outside Outside
Media and Ribbon Window Std Std
Field Upgradeable Printhead Yes Std
RFID Ready Std No
Full Roll Rewind Opt Opt
Cutter Opt Opt
Media Supply Spindle No No
Quick Change Platen Roller Std No
Real Time Clock Std Std
Printer Languages
ZPL, EPL, APL-I,
APL-D, XML
ZPL, APL-I, APL-D,
XML
LCD Display 240 x 128 (pixels) 2 X 16)
Weight 32.4lbs (15kg) 32.4lbs (15kg
Size (H x W x L)
13.3” x 10.9” x 18.7”
(338mm x 278mm x
475mm)
13.3” x 10.9” x 18.7”
(338mm x 278mm x
475mm)
ZM400 vs. Z4Mplus
The ZM400 is the next
generation of 4” Z Series
printers, offering
everything that Z4Mplus
offers and more. The best
in class just got better.
While both printers offer
setup via an LCD display,
the display on the ZM400
is larger, easier to read
and offers Asian language
support.
The ZM400 offers a higher
print speed at 300 dpi (8
ips vs. 6 ips.) and a true 4”
600 dpi print solution.
Ethernet support has been
greatly enhanced.
Internal 10/100 Ethernet
no longer requires
sacrificing the parallel
port. Additional wireless
support is offered via the
WirelessPlus PrintServer.
RFID-Ready on the
ZM400 offers investment
protection for when you
are ready to upgrade to
RFID.
An optional ribbon spindle
supporting ribbon coated
ink-side in allows better
“drop in” compatibility with
Datamax Prodigy
replacements when used
with APL-D.
ZM400/ZM600
Internal Comparison
Product Guide - EMEA 19 May 2007
ZM400™ 110 XilllPlus
Printer Features
Print Width, max. 4.09” (104mm) 4.01" (103mm)
Dots/Inch 203/300/600 203/300/600
Max Print Speed 10 ips (254mm) 10 ips (254mm)
Standard RAM 16MB 16MB
STD Flash Memory 8MB 4MB
Media Features
Label Width, max. 4.5” (114mm) 4.5" (114mm)
Label Width, min. 1.0” (25.4mm) 0.79" (25.4mm)
Label Length, max 39.0” (991mm) 39" (991mm)
Label Length min.
0.5” (12.7mm)
Tear/Peel/Rewind,
1.0” (25.4mm)Cutter
0.7” (17.7mm) Tear,
0.5” (12.7mm) Peel,
0.25”(6.4mm)Rewind,
1.5”(57.2mm) Cutter.
Roll Size, O.D. & Mounting 8.0” (203mm) 8" (203mm)
Max Ribbon Length 1476’ (450m) 1476' (450m)
Interface
Serial Std Std
Parallel Std Std
Ethernet 10/100 Opt Opt
USB 2.0 Interface Std Std
Wireless 802.11b/g Opt 802.11b/g Opt
Other
Ribbon Coated Inside or Outside Outside
Media and Ribbon Window Std Std
Field Upgradeable
Printhead
Yes No
RFID Ready Std Opt
Full Roll Rewind Opt Opt
Cutter Opt Opt
Media Supply Spindle No Opt
Quick Change Platen Roller Std No
Real Time Clock Std Std
Printer Languages
ZPL, EPL, APL-I,
APL-D, XML
ZPL, APL-I, APL-D,
XML
LCD Display 240 x 128 (pixels) 2X16
Weight 32.4lbs (15kg) 50lbs (23kg)
Size (H x W x L)
13.3” x 10.9” x 18.7”
(338mm x 278mm x
475mm)
15.5" x 10.4" x 19.5"
(394mm x 264mm x
495mm)
ZM400 vs. 110XiIIIPlus
While the ZM400 offers a
4” 600 dpi print width vs.
the 110XiIIIPlus 3.2” 600
dpi print width, the min
label length of the
110XiIIIPlus is smaller,
offering a better solution
for small electronic labels
The 110XiIIIPlus is all
metal, including spindles,
gears, etc. offering a
heavy duty construction
capable of lasting in the
most abusive
environments.
While the print speed of
both printers is
comparable, the
110XiIIIPlus offers a
higher duty cycle making it
more appropriate for 24/7
mission critical
applications.
The 110XiIIIPlus printer’s
optional media spindle
allows unique mounting
possibilities not offered by
the ZM400.
By providing media back
tension, the 110XiIIIPlus
printer’s media spindle
can also help provide
tighter registration when
printing on tiny labels.
The 110XiIIIPlus printer’s
adjustable print
mechanism allows users
to precisely “dial-in” a print
line position for the best
print quality possible.
ZM400/ZM600
Internal Comparison
Product Guide - EMEA 20 May 2007
ZM600™ Z6Mplus™
Printer Features
Print Width, max. 6.60” (168mm) 6.60" (168mm)
Dots/Inch 203/300 203/300
Max Print Speed 10 ips (254mm) 10 ips (254mm)
Standard RAM 16MB 8MB
STD Flash Memory 8MB 4MB
Media Features
Label Width, max. 7.0” (178mm) 7.0" (178mm)
Label Width, min. 2.0” (51mm) 2.0" ( 51mm)
Label Length, max 39.0” (991mm) 39.0" (991mm)
Label Length Min.
0.5” (12.7mm)
Tear/Peel/Rewind,
1.0” (25.4mm)Cutter
.5" (12.7mm) / 1.0"
(25.4mm)
Roll Size, O.D. & Mounting 8.0” (203mm) 8" (203mm)
Max Ribbon Length 1476’ (450m) 1476' (450m)
Interface
Serial Std Std
Parallel Std Std
Ethernet 10/100 Opt Optional
USB 2.0 Interface Std N/A
Wireless 802.11b/g Opt 802.11b Optional
Other N/A
Ribbon Coated Inside or Outside Outside
Media and Ribbon Window Std Std
Field Upgradeable
Printhead
Yes Yes
RFID Ready Std No
Full Roll Rewind Opt Opt
Cutter Opt Opt
Media Supply Spindle No No
Quick Change Platen Roller Std No
Real Time Clock Std Std
Printer Languages
ZPL, ELP, APL-I, APL-
D, XML
ZPL, APL-I, APL-D,
XML
LCD Display 240 x 128 (pixels) 2X16 Char
Weight 34.7lbs (16kg) 34.7lbs (16kg)
Size (H x W x L)
13.3” x 13.4” x 18.7”
(338mm x 441mm x
475mm)
13.3” x 13.4” x 18.7”
(338mm x 441mm x
475mm)
ZM600 vs. Z6Mplus
The ZM600 is the next
generation of 6” Z Series
printers, offering
everything that Z6Mplus
offers and more. The best
in class just got better.
While both printers offer
setup via an LCD display,
the display on the ZM600
is larger, easier to read
and offers Asian language
support.
The ZM600 offers a higher
print speed at 300 dpi (8
ips vs. 6 ips.).
Ethernet support has been
greatly enhanced.
Internal 10/100 Ethernet
no longer requires
sacrificing the parallel
port. Additional wireless
support is offered via the
WirelessPlus PrintServer.
RFID-Ready on the
ZM600 offers investment
protection for when you
are ready to upgrade to
RFID.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33

Zebra Technologies ZM400 User manual

Category
Label printers
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI