GM Lighting LD-EDWP-UNV30 User manual

Type
User manual
LineDRIVE™ LD-EDWP-UNV30/60/90
Wet Location Power Supply
Installation Instructions
FIG. 1
®
NOTE: DO NOT INSTALL IN AN APPLICATION THAT
IS OUTSIDE OF THE PRODUCTS LISTED AMBIENT
TEMPERATURE OR IN AN AREA THAT IS NOT
EASILY ACCESSIBLE FOR SERVICE
REQUIREMENTS.
THIS IS A WET LOCATION POWER SUPPLY. DO NOT
SUBMERGE IN WATER.
REFER TO DIAGRAMS AT RIGHT FOR COMPONENT
IDENTIFICATION AND PROPER MOUNTING AND
CONNECTING TO 24V LIGHTING FIXTURES.
1. MOUNTING. Remove Knock-Outs and
use wet-rated fittings (by others). Mount
LD-EDWP Power Supply Horizontally, a
minimum of 12” from the ground. (FIG. 1)
2. CONNECTING TO 24V LED TAPE OR
OTHER 24V FIXTURES. Connect Red and
Black leads coming from power supply to
Red and Black leads coming from tape.
Use wire nuts (by others) or GM Lighting
SureTite™ connectors to insure a reliable
connection. (FIG. 2).
3. CONNECTING TO LINE VOLTAGE. Use
white for hot, black for negative and green
for ground to connect power supply to
120V/277V power. (FIG. 3).
MOUNT TAPE OR FIXTURES ACCORDING TO
MANUFACTURERS SPECIFICATIONS.
BEFORE YOU START:
• Please check local electrical codes before beginning
Turn power off before installing
• Make sure to use properly rated wire
©2022 GM Lighting
Specifications are subject to change
without notice.
18700 Ridgeland Ave.
Tinley Park, IL 60477
Toll-Free: (866) 671-0811
FAX: (708) 478-2640
www.gmlighting.net
LD-EDWP-UNV30-60-90_041522
“Lighting Enhanced by Design”
®
DIM
WET
24
VOLT
Mount Horizontally
Cover with
Mounting Screws (4)
To 120V
or 277V Power
Black
Green
White
1/2” Knock-Outs (3)
Wet-Rated Fittings (by others)
Required
Water-Proof Gasket
1/2” Knock-Outs (3)
Wet-Rated Fittings (by others)
Required
To 24V LED Tape
or Other Fixture
Red
Black
-OUTDOOR RATED
LD-EDWP-UNV30-24
3
4
Outdoor, Wet Location Use
0.35A
120V / 277V Tape
Wire Nuts (by others)
24V Tape (Wet Location)
120V / 277V
FIG. 2
FIG. 3
  • Page 1 1

GM Lighting LD-EDWP-UNV30 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI