2. Computers & electronics
  3. TVs & monitors
  4. Wall & ceiling mounts accessories
  5. Toro
  6. Front Weight Kit, Zero-Turn-Radius Riding Mower

Toro Front Weight Kit, Zero-Turn-Radius Riding Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Front Weight Kit, Zero-Turn-Radius Riding Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3435-911RevA
FrontWeightKit
Zero-Turn-RadiusRidingMower
ModelNo.140-2050
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
–
Preparethemachine.
2
Nopartsrequired
–
Removetheguards(machinesequipped
withMyRideonly).
Bolt(3/8x1inch)
4
Locknut(3/8inch)
6
Leftweight-mountingbracket
1
Rightweight-mountingbracket1
Washer2
Bolt(5/8x2-3/4inches)
2
3
Suitcaseweight
8
Installtheweights.
4
Nopartsrequired
–
Installtheguards(machinesequipped
withMyRideonly).
1
PreparingtheMachine
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurface.
2.Disengagetheblade-controlswitch.
3.Movethemotion-controlleversoutwardtothe
NEUTRAL-LOCKpositiontoengagetheparking
brake.
4.Shutofftheengineandremovethekey.
©2019—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3435-911*A
2
RemovingtheGuards
MachinesEquippedwithMyRide
®
Only
NoPartsRequired
Procedure
Note:Retainallremovedpartsforlaterinstallation.
1.Removetheboltssecuringtheguardsonthe
sidesoftheframe.
2.Removetheguardsonbothsidesoftheframe
(Figure1).
g308507
Figure1
3
InstallingtheWeights
Partsneededforthisprocedure:
4
Bolt(3/8x1inch)
6
Locknut(3/8inch)
1
Leftweight-mountingbracket
1Rightweight-mountingbracket
2Washer
2
Bolt(5/8x2-3/4inches)
8
Suitcaseweight
Procedure
CAUTION
Thebaggerchangestheweightdistributionof
themachine.Operatingthemachinewithout
thefrontweightsmaycauseanunstable
condition,whichcouldresultinalossof
control.
Ensurethefrontweightsareproperlyinstalled
beforeoperatingthemachinewiththebagger
attachment.
1.Installtheweight-mountingbracketstotheunder
sideoftheframeusing2bolts(3/8x1inch),
and2locknuts(3/8inch)asshowninFigure2.
2.Installsuitcaseweightstotheweightmounting
bracketsusing2bolts(5/8x2-3/4inches),2
washers,and2locknuts(3/8inch)asfollows:
•Ifyourmachinehasa42-inchstampeddeck,
install8suitcaseweights.
•Ifyourmachinehasanyothercuttingdeck,
install6suitcaseweights(Figure3).
3.Onceyouhaveinstalledalltheweightsand
brackets,ensurethatallthefastenersaretight.
Tightenasnecessary.
Important:Wheneveryouremovethe
baggerattachment,remembertoremovethe
frontweightstoreturntheproperstability
tothemachine.
2
g299192
Figure2
Castorforkandwheelnotshownforclarity.
1.Frontrightcaster4.Rightmountingbracket
2.Forwardhole(rightside
shown)
5.Bolts(3/8x1inch)
3.Locknut(3/8inch)
g299244
Figure3
1.Spacer
3.Suitcaseweights
2.Locknut(3/8inch)4.Bolts(5/8x2-3/4inches)
4
InstallingtheGuards
MachinesEquippedwithMyRide
Only
NoPartsRequired
Procedure
1.Insertthetopoftheguardunderthedeck;tiltthe
guardsothatitslidesundertheframeandtthe
guardintothenotches(Figure4).
g308505
g308526
Figure4
1.Notch
2.Securetheguardstotheframeusingthebolts
removedin2RemovingtheGuards(page2)
asshowninFigure1.
3
/