Toro Front Weight Kit, Zero-Turn-Radius Riding Mower Installation guide
- Category
- Wall & ceiling mounts accessories
- Type
- Installation guide
FormNo.3435-911RevA
FrontWeightKit
Zero-Turn-RadiusRidingMower
ModelNo.140-2050
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
–
Preparethemachine.
2
Nopartsrequired
–
Removetheguards(machinesequipped
withMyRideonly).
Bolt(3/8x1inch)
4
Locknut(3/8inch)
6
Leftweight-mountingbracket
1
Rightweight-mountingbracket1
Washer2
Bolt(5/8x2-3/4inches)
2
3
Suitcaseweight
8
Installtheweights.
4
Nopartsrequired
–
Installtheguards(machinesequipped
withMyRideonly).
1
PreparingtheMachine
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurface.
2.Disengagetheblade-controlswitch.
3.Movethemotion-controlleversoutwardtothe
NEUTRAL-LOCKpositiontoengagetheparking
brake.
4.Shutofftheengineandremovethekey.
©2019—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3435-911*A
2
RemovingtheGuards
MachinesEquippedwithMyRide
®
Only
NoPartsRequired
Procedure
Note:Retainallremovedpartsforlaterinstallation.
1.Removetheboltssecuringtheguardsonthe
sidesoftheframe.
2.Removetheguardsonbothsidesoftheframe
(Figure1).
g308507
Figure1
3
InstallingtheWeights
Partsneededforthisprocedure:
4
Bolt(3/8x1inch)
6
Locknut(3/8inch)
1
Leftweight-mountingbracket
1Rightweight-mountingbracket
2Washer
2
Bolt(5/8x2-3/4inches)
8
Suitcaseweight
Procedure
CAUTION
Thebaggerchangestheweightdistributionof
themachine.Operatingthemachinewithout
thefrontweightsmaycauseanunstable
condition,whichcouldresultinalossof
control.
Ensurethefrontweightsareproperlyinstalled
beforeoperatingthemachinewiththebagger
attachment.
1.Installtheweight-mountingbracketstotheunder
sideoftheframeusing2bolts(3/8x1inch),
and2locknuts(3/8inch)asshowninFigure2.
2.Installsuitcaseweightstotheweightmounting
bracketsusing2bolts(5/8x2-3/4inches),2
washers,and2locknuts(3/8inch)asfollows:
•Ifyourmachinehasa42-inchstampeddeck,
install8suitcaseweights.
•Ifyourmachinehasanyothercuttingdeck,
install6suitcaseweights(Figure3).
3.Onceyouhaveinstalledalltheweightsand
brackets,ensurethatallthefastenersaretight.
Tightenasnecessary.
Important:Wheneveryouremovethe
baggerattachment,remembertoremovethe
frontweightstoreturntheproperstability
tothemachine.
2
g299192
Figure2
Castorforkandwheelnotshownforclarity.
1.Frontrightcaster4.Rightmountingbracket
2.Forwardhole(rightside
shown)
5.Bolts(3/8x1inch)
3.Locknut(3/8inch)
g299244
Figure3
1.Spacer
3.Suitcaseweights
2.Locknut(3/8inch)4.Bolts(5/8x2-3/4inches)
4
InstallingtheGuards
MachinesEquippedwithMyRide
Only
NoPartsRequired
Procedure
1.Insertthetopoftheguardunderthedeck;tiltthe
guardsothatitslidesundertheframeandtthe
guardintothenotches(Figure4).
g308505
g308526
Figure4
1.Notch
2.Securetheguardstotheframeusingthebolts
removedin2RemovingtheGuards(page2)
asshowninFigure1.
3
-
1
-
2
-
3
-
4
Toro Front Weight Kit, Zero-Turn-Radius Riding Mower Installation guide
- Category
- Wall & ceiling mounts accessories
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Toro ROPS Kit, TimeCutter Riding Mower Installation guide
-
-
-
-
Toro 60in E-Z Vac Triple Bagging System, Z Master G3 Mower User manual
-
Toro 60in E-Z Vac DFS Collection System, Z Master G3 Mower User manual
-
-
-
Toro E-Z Vac Complete Twin Bagger, TITAN Zero-Turn-Radius Riding Mower User manual
-
