Samsung SMT-C7200 Owner's manual

English

SMT-C7200/E

User Guide

The purpose of Safety Concerns is to ensure users' safety and to prevent property losses.

Please read this document carefully for proper use.

COPYRIGHT

TRADEMARKS

This guide is proprietary to SAMSUNG Electronics Co., Ltd. and is protected by copyright.

No information contained herein may be copied, translated, transcribed or duplicated for

any commercial purposes or disclosed to third parties in any from without the prior written

consent of SAMSUNG Electronics Co., Ltd.

This guide may be changed for product improvement, standardization or other technical reasons

without prior notice.

For further information on the updated guide or the contents contained in the guide,

please contact your Authorized Samsung Reseller.

Product names mentioned in this document may be trademarks and/or registered trademarks

of their respective companies.

English _1

SAFETY INSTRUCTIONS

The purpose of the Safety Concerns section is to ensure the safety of users and

prevent property damage. Please read this document carefully for proper use.

Usage

Warning

Provides information or instructions that you should follow in order to avoid

personal injury or fatality.

Caution

Provides information or instructions that you should follow in order to avoid a

failure or damage to your device.

Note

Indicates additional information for reference.

Checks

Provides checkpoints for stable system operation.

Symbols

Caution

Indication of a general caution.

Restriction

Indication prohibiting an action for a product.

Instruction

Indication directing a specifically required action.

2

_  SAMSUNG ELECTRONICS Co., Ltd.

Warning

Power

Insert the power plug firmly.

Do not connect multiple devices to a

single outlet simultaneously.

Do not touch the main body, power

cable, or power plug with moist hands.

If video/sound cable generates heat

after connection, pull out the power

plug and contact customer service

immediately.

Installation/Maintenance

Install the product in an area with good

ventilation.

Do not cover the top.

Do not place in humid or dusty areas, or

near heat sources.

Pull out the power plug during

thunderstorms or when not used for a

prolonged period of time.

Keep flammable substances and sprays

away from the device.

Pull out the power plug at once and

contact customer service if unusual

noise, smell, or smoke comes out.

Do not place heavy objects on this

product.

General

Check if the antenna cable is correctly

grounded before connecting to the

device.

This product complies with 21 CFR

Chapter 1, subchapter J.

Class 1 LED Product.

English _3

Caution

Power

Connect your TV after powering off the

TV and the device by pulling out the

power plugs.

The socket-outlet shall be installed near

the device and shall be easily

accessible.

Do not insert the power plug before

connecting the power cable to the

device.

Before connecting the power source,

permanent protective earth connection

to the cable distribution should be

made.

Installation/Maintenance

Install the product correctly complying

with the instructions in the user guide.

No connection to antenna.

Do not spray water directly on the

device and do not use chemical

solvents such as wax, mosquito spray,

alcohol or detergent.

Do not place any metal items such as

pins, paper clips or coins on top of the

device.

Do not place the device on unstable

surface.

Risk of electric shock, Do NOT OPEN.

Do not disassemble, repair or remodel.

Wipe the device with a soft and dry

cloth when cleaning.

Do not touch the Antenna Cable Tuner

as it may be hot during device

operation. Otherwise, it may result in a

burn injury.

Cautions regarding data loss (HDD management)

1. When handling, take care not to damage the data in the hard disk.

- Hard disks are vulnerable to problems caused by the external environment or to impact

during use, so take care not to damage the device.

- Take care not to move the device while the power is on, or to subject it to impact, as

this may damage the data.

2. Situations where the hard disk and data may be damaged

- The hard disk and data may be damaged if subjected to shock while moving the device

or during installation.

- The hard disk and data may be damaged when the device is reset (reconfigured) or

if there is a power outage while the hard disk is running.

- Data may be irrecoverable for a variety of reasons (e.g. a virus infection).

- The hard disk and data may be damaged by turning the power off while recording or

playing.

- Files may be damaged or bad sectors may result if the device is subjected to shock

or moved while the hard disk is operating.

4

_  SAMSUNG ELECTRONICS Co., Ltd.

TABLE OF CONTENTS

SAFETY INSTRUCTIONS 1



Usage ....................................................................................... 1

Symbols ................................................................................... 1

Warning .................................................................................... 2

Caution .................................................................................... 3

BEFORE USAGE 6



HD DVR Cable ......................................................................... 6

Key Functions of the SMT-C7200/E ...................................... 6

Package Contents .................................................................. 8

Names and Functions ............................................................ 9

Front Panel ...................................................................................... 9

Rear Panel..................................................................................... 11

Remote Control .................................................................... 12

TV Operation using a Remote Control ........................................ 13

INSTALLATION 15



Installation Environment ...................................................... 15

Peripheral Devices Connection .......................................... 16

Connection to a TV with an HDMI Port ....................................... 17

Connection to a TV with a SCART Port ....................................... 18

Connection to a VCR with a SCART Port ................................... 19

Connection to a TV or VCR with a Composite Port .................... 20

Connection to a Digital Audio Equipment ................................... 21

Connection to Antenna Socket (to the Cable Network).............. 22

Connection to a TV with an Antenna Cable ................................ 23

English _5

Connection to a Router ................................................................ 24

USB Port ....................................................................................... 25

HOW TO USE THE PRODUCT 26



Installation Wizard ............................................................... 26

Basic Operation ................................................................... 32

Using the Main Functions ................................................... 36

Main Menu ............................................................................ 39

Electronic Program Guide (EPG).................................................. 40

Recordings .................................................................................... 41

Vodafone Select ........................................................................... 45

Search ........................................................................................... 47

Settings ......................................................................................... 49

TROUBLESHOOTING 64



ANNEX 66



TV Manufacturer Number ................................................... 66

Product Specifications ........................................................ 74

Customer Support ............................................................... 75

Open Source Announcement ............................................. 76

6

_  SAMSUNG ELECTRONICS Co., Ltd.

BEFORE USAGE

HD DVR Cable

The SMT-C7200/E is a HD DVR (Digital Video Recorder), i.e. a hard disk recorder for

cable reception.

Key Functions of the SMT-C7200/E

HD Grade Image Display

Supports high-resolution video output of up to 1080i and offers you clear and

piercingly sharp images.

Dolby Digital Sound

Produces realistic digital sound by connecting the device to a receiver amplifier

through the SPDIF output port, which supports Dolby Digital.

Electronic Program Guide (EPG) Function

Use the EPG to check the program information and broadcast schedule of a desired

channel and schedule programs to watch. The EPG appears if you press the

‘Programm’ button on the remote control.

Recording Features

There are three possible operating modes.

- Live/Time Shift (time-lapsed viewing mode) + maximum of three simultaneous

recordings

- Playback + maximum of three simultaneous recordings

- Maximum of four simultaneous recordings

You can always pause, play, rewind and fast-forward.

Time Shift (time-lapse viewing mode)

The Time Shift function records live TV temporarily and allows you to easily navigate

through the program. As the channel you are watching live is recorded temporarily,

you can replay scenes you may have missed from live programs.

Time Shift starts when the user presses the Pause (

) button and stops

when the user presses the Stop (

) button.

The Time Shift function uses the Time Shift buffer on the hard disk for recording.

English _7

Instant Recording

Automatic recording of the program currently being watched. A temporary recording

starts when you change from the channel you are watching to another one and

stops when you change channels again. Note that when one temporary recording

stops, it is deleted and another one starts at the same time.

Recording

You can record TV or radio programs on the internal storage by pressing the

Rec (

) button on the RCU or front panel of the device or scheduling recording

of programs via the EPG for instance.

8

_  SAMSUNG ELECTRONICS Co., Ltd.

Package Contents

Please make sure the following items are included in your product packaging.

SMT-C7200/E

Power Cable Antenna Cable Standard HDMI Cable

Remote Control

(with 2 AAA Batteries)

User Guide LAN Cable

English _9

Names and Functions

This section describes the names and functions of the parts on the front and rear

panel of the device



Front Panel

This section describes the elements on the front and front panel



Name Description

Smartcard Slot Pull flap to insert Smartcard with chip facing down.

TV/Radio Toggle between TV and Radio services.

- Illuminates green in Radio mode

Menü (Menu) Display the main menu.

Zurück (Back) Go back to the previous screen or mode.

Navigation Move to select the menu and function.

OK Select the menu and function.

Stop Stop recording and Time Shift mode and go back to live TV.

Rewind Rewind the program or recording/Go back 24 hours in EPG.

- Flashes green when Rewind is active

Play/Pause Play or pause the program or recording. Start Time Shift mode.

- Illuminates green in Play mode

- Flashes green in Pause mode

Forward Fast-forward the program or recording. Move forward 24 hours in

EPG.

- Flashes green when Fast-Forward is active

10

_  SAMSUNG ELECTRONICS Co., Ltd.

Name Description

Record Record a currently showing program or schedule a recording.

Cancel recording if scheduled for recording.

- Illuminates red while recording is in progress

- Illuminates green while recording is scheduled

Standby Change the status of a device to standby or active mode.

- Illuminates red in standby mode

- Illuminates green in active mode

English _11

Rear Panel

This section describes the names and functions of the ports on the rear panel.

Name Description

Power Cable Port Port that connects to the power cable.

Power On/Off Switch Switch to turn the device power on/off. The device is

switched on when I at the top of the button is pushed.

Cable IN * Port that connects the device to an antenna jack through

an antenna cable.

Cable OUT * Port that connects the device to a TV through an antenna

cable.

VCR SCART Port that connects to a VCR with a SCART cable.

TV SCART Port that connects to a TV with a SCART cable.

Network Port that connects to a WLAN router with a LAN cable.

VIDEO Port that connects to a TV or VCR with a video cable.

ANALOG AUDIO (L, R) Port that connects to a TV, VCR or audio system with an

audio cable (L/R).

DIGITAL AUDIO (SPDIF) Port that connects to a digital audio system with an

optical cable.

USB Port that connects to external USB devices.

HDMI OUT Port that connects to a TV with an HDMI cable.

*

Do not touch the 3, 4 Antenna Cable Tuner as it may be hot during device

operation. Otherwise, it may result in a burn injury.

12

_  SAMSUNG ELECTRONICS Co., Ltd.

Remote Control

This section describes the functions of all buttons on a remote control.

Exit: Stop a screen/mode,

and go back to the last

channel watched, switch

from TV to the HD Digital

Video Recorder mode.

Rewind:

Rewind the program

/

recording/Go back 24 hours.

Play/Pause:

Play and pause

the program/recording

/Change to Time Shift mode.

Fast-Forward:

Fast-forward

the program/Move forward

24 hours in EPG.

TV: Switch to TV mode

and operate TV.

Programm:

Shows EPG

screen from any screen.

Select Video:

Access

V

odafone

Select.

Volume (V+/V-):

Adjust the

volume.

OK: Confirm a selection and

dis

p

la

y

the za

pp

in

g

banner.

Mute:

Turn vol ume on/off .

Record:

Record a program

showing currently or scheduled

for recording. Stop recording or

delete scheduled recording.

Opt:

Display window for

selection of Audio & Subtitle

language, as well as video

sub-channels.

Jump to prime time (8 pm)

on the EPG screen.

Standby: Power on/off.

Aufnahmen: Access

/

manage

recording list.

TV/Radio: Toggle between TV

and Radio services.

Menü: Navigates straight to Menu

screen of the HD Digital Video

Recorder from any screens.

Suche: Access the program search

feature.

Channel (P+/P-): Change the

channel, display next/previous

page in the EPG.

Info: Display the program information.

Stop: Stop playback. Stop Time

Shift mode.

Color: Select special functions.

Teletext: Display Teletext

pages if available.

Zurück: Go back to the previous

screen or mode.

Navigation: Move to menu,

zapping banner and other

selection screens.

0-9: Change channel by directly

entering the number. Direct

selection of menu items.

English _13

Inserting Batteries in the Remote Control

Alkaline batteries (not standard batteries) should be used for the remote control

to prolong its life span. Using standard batteries, may cause problems when

using the remote control.

- Two identical new batteries should be used for the remote control.

- Remove the batteries when a remote control is not used for a long time.

TV Operation using a Remote Control

You can operate a TV with the remote control 

- Standby/Wake up

- Turn volume up/down, Mute

- Change channels

- Navigation arrows, OK confirmation

- Access TV menu (

)

Programming the Universal Remote Control

1

Check the ‘TV manufacturer number’ section in the Appendix to find the

relevant 4-digit TV manufacturer number and turn on the TV.

2

Press and hold the TV (

) button and the Programm ( )

button together for a minimum of 3 seconds until the LED flashes twice.

3

Enter the 4-digit code for your TV or the 4-digit code universal code

number by pressing each digit button in sequence within 10 seconds of

releasing the previous button.

With the first 3 digits, the LED will flash briefly. On the 4th digit, the LED will

flash twice if the code entered is a valid code.

- If you cannot find your TV in the code list, please use code number 0000 in step 3 and

press the Standby button until the TV turns off. This will trigger a search through all

codes available in the remote irrespective of the brand and takes some time.

14

_  SAMSUNG ELECTRONICS Co., Ltd.

4

Press the Standby ( ) button continuously until the TV turns off.

When the TV turns off, release the Standby (

) button and press the

TV

(

)

button for 3 seconds to confirm the code.

5

Press the TV ( ) button to operate your TV.

Volume Setting

When a TV ID is programmed the volume control on the remote control regulates the

TV also in device mode. To control the device volume again, press the Exit ( )

button and Mute (

) button simultaneously for at least 3 seconds. The LED will

flash twice to confirm successful volume setting.

For controlling the TV volume once again in device mode, press the TV (

)

button and Mute ( ) button as described above. The LED will flash twice to

indicate setup has been successful.

Querying the Stored 4-Digit Code

You can check the 4-digit code stored on the remote control to control your TV set.

- On the remote control, press the 1 (

) button and Info ( ) button

simultaneously.

The LED will flash as many times as the first number stored.

(No flash means the digit is 0.)

- Press the 2 (

) button and Info ( ) button simultaneously for the second

digit.

- Press the 3 ( ) button and Info ( ) button simultaneously for the third digit.

- Press the 4 (

) button and Info ( ) button simultaneously for the last digit.

Resetting the Universal Remote Control

- On the remote control, press the Menü ( ) button, Teletext ( ) button

and Standby ( ) button simultaneously for at least 3 seconds until the LED

flashes twice.

- The remote control deletes all codes stored. Once reset to its default factory

settings, the LED flashes twice again.

English _15

INSTALLATION

This section describes how to install the device (SMT-C7200/E).

Installation Environment

The table below includes details on the installation environment for the device



Parameter Description

Operating Temperature 0-40°C

Operating Humidity 20–80% (40°C)

Rated Voltage, Frequency AC 230 V +/- 15%, 50 Hz

Rated Power Consumption Max. 28 W

Broadcasting Rx Frequency 47~862 MHz

When Using and Installing the Product

The product must be used under the specified environment.

Otherwise, it may damage or shorten its life span.

Connecting the device to Peripheral Devices

- Please check whether the power supply to the TV or VCR to which the device is

connected is properly earthed. Otherwise, there is risk of fire hazard.

- If excessive heat is produced from cables after connecting the video/audio

cables, contact your service center. Such situations may cause a fire.

16

_  SAMSUNG ELECTRONICS Co., Ltd.

Peripheral Devices Connection

This section describes how to connect the cable and each peripheral device to the

device.

(The product image may differ from the actual product.)

English _17

Connection to a TV with an HDMI Port

This section describes how to connect the device to a TV with an HDMI port.



Connect the HDMI port on the rear of the device to the HDMI port of the TV using

an HDMI cable.

High Definition Multimedia Interface (HDMI)

SMT-C7200/E incorporates HDMI technology.

The HDMI port is an integrated video-audio port to provide high-definition

images by connecting the device to a HD TV. Connect the device to the HDMI

port of your HD TV.

When Connecting to TV

When connecting the device to a TV, power off both the TV and the device, pull

out their power plugs and then connect. You can easily connect it by referring to

the ‘TV User Manual’.

- If you connect/disconnect the HDMI cable without powering off both the TV

and device, the TV may not display video.

18

_  SAMSUNG ELECTRONICS Co., Ltd.

Connection to a TV with a SCART Port

This section describes how to connect the device to a TV with a SCART port.

Connect the TV SCART port on the rear of the device to the SCART port of the TV

using a SCART cable (not provided).

Please note that to enjoy HD-TV a connection via HDMI is mandatory.

Page is loading ...

Samsung SMT-C7200 Owner's manual

Samsung SMT-C7200 Owner's manual

Related papers

Other documents