2. Coemar
  3. How to use a standard clamp

Coemar How to use a standard clamp Instructions Manual

  • Hello, I've reviewed the user manual for the MiniLEDko Portable clamp. I understand that it details how to change the screw to use a standard clamp. I'm ready to answer your questions about this procedure or any other aspect of the device.
  • What kind of screw is needed to use a standard clamp with the MiniLEDko Portable?
    Do I need to modify the MiniLEDko Portable to use a standard clamp?
    How long should the screw be?
How to use a standard clamp
with the MiniLEDko Portable
To use a standard clamp you need to change the screw in order to match it with the MiniLEDko.
As shown in the photos below pull away the screw and replace it with a screw M8 with a length
of 24 mm (0.95 in)
VIA CARPENEDOLO, 90
46043, CASTIGLIONE DELLE STIVIERE (MN) – ITALY
PH. +39 0376 1514412 – FAX.+ 39 0376 1514380
M8
24 mm
/