2. Shine Company
  3. 5616BA

Shine Company 5616BA, 5616RW, 5616VG, 5618BA, 5618VG Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Shine Company 5616BA Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
L
R
LR
LR
1 PC Short
Machine Thread
(6 x 50 m/m)
& 1 Nut
1 PC Short
Machine Thread
(6 x 50 m/m) & 1 Nut
Seat
A
Front Leg
B
Rear Armrest
Support
C
Arm Rest
D
E
Back Rest
8 PC
Short
Machine
Thread
(6 x 50 m/m)
4 PC
Lag Bolts
(6 x 60 m/m)
4 PC
Wood
Screws
(3.5 x 40 m/m)
4 PC
Barrels
10 PC
Nuts
PARTS INCLUDED:
2 PC
Long
Machine
Thread
(6 x 60 m/m)
Step 2:
Place Seat in upright position.
Screw Rear Armrest Support with
one Short Machine Thread (6 x 50 m/m)
and one Nut to Seat so that it is
perpendicular to the floor.
Repeat on the other side.
NOTE: Lightly screw the bolts of
Rear Armrest Support to properly
attach to Armrest in the next step.
A
C
A
C
D
How To Assemble Your Adirondack Chair
TOOLS NEEDED: Philips screwdriver, power drill optional
CAUTION: When assembling chair, DO NOT completely tighten the bolts and nuts until all the parts
& holes are properly aligned.
Step 1:
Place Seat on its side and
screw Front Leg with three
Short Machine Thread (6 x 50 m/m)
and three Nuts.
Repeat on the other side.
A
B
3 PC Short
Machine Thread
(6 x 50 m/m)
& 3 Nuts
3 PC Short
Machine Thread
(6 x 50 m/m)
& 3 Nuts
(REV. 9/2016)
/