Shine Company 4212GS Operating instructions

Shine Company
Brand
Shine Company
Model
4212GS
Type
Operating instructions
PARTS INCLUDED:
How To Assemble Your Bench
TOOLS NEEDED: Philips screwdriver, power drill optional
CAUTION: When assembling bench, DO NOT completely tighten the bolts and nuts
until all the parts & holes are properly aligned.
(REV. 9/2016)
6 PCS
Lag Bolts
(6 x 60 m/m)
6 PCS
Barrels
Right Armrest
A
Left Armrest
B
B
B
B
B
Seat Back
C
C
C
Seat
D
D
D
D
Step 2:
Attach Left Armrest to Seat Back.
Step 3:
Repeat same on the other side.
Step 1:
Attach Left Armrest to Seat.
Step 4:
Place 2 barrels into holes found on the Seat Back. Remove any debris from holes.
Step 6:
Place 4 barrels into holes found under the Seat. Remove any debris from holes.
B
B
C
C
C
C
D
D
D
D
A
A
A
A
Left
Left
Right
Right
1 PC Lag Bolt
(6 x 60 m/m)
1 PC Lag Bolt
(6 x 60 m/m)
1 PC Lag Bolt
(6 x 60 m/m)
1 PC Lag Bolt
(6 x 60 m/m)
1 PC Lag Bolt
(6 x 60 m/m)
1 PC Lag Bolt
(6 x 60 m/m)
1 PC Barrel
Barrel
Barrel
1 PC Barrel
Barrel
Step 7:
Use 2 PCS of Lag Bolts (6 x 60 m/m) to attach Right Armrest into Seat.
Repeat same on the other side. Tighten all bolts into barrels.
Step 5:
Use 1 PC Lag Bolt (6 x 60 m/m) to attach Right Armrest into Seat Back.
Do not tighten. Repeat same on the other side.
  • Page 1 1
  • Page 2 2

Shine Company 4212GS Operating instructions

Shine Company
Brand
Shine Company
Model
4212GS
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents