2. CMP
  3. LED Bubbler Fountain Accessory

CMP LED Bubbler Fountain Accessory Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the CMP LED Bubbler Fountain Accessory Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
CUSTOM MOLDED PRODUCTS | 36 HERRING ROAD, NEWNAN, GA 30265 | WWW.C-M-P.COMjh1014
®
LED BUBBLER FOUNTAIN ACCESSORIES
CMP 25503-9XX-000
INSTALLATION
1. Remove Eyeball Cap by unscrewing it counterclockwise (it is
recommended to use CMP Eyeball Cap Removal Tool: 25503-
999-998). Remove Eyeball and Eyeball Reducer.
2. Screw in the Bubbler Union Attachment into same socket that
the Eyeball was removed from.
NOTE: The 5-1/2” Bubbler Three Tier Attachment (25503-930-
000) does not include the Bubbler Union Attachment, but it
screws into the Bubbler Lens the same way as the Bubbler
Union Attachment.
3. FOR DECORATION ONLY. NOT A TOY. NO
DIVING, JUMPING, SWIMMING, OR PLAYING NEAR FOUNTAIN
ACCESSORY WHEN INSTALLED. UNINSTALL FROM BATHING
AREA BEFORE SWIMMING IS ALLOWED. FAILURE TO COMPLY
WITH WARNING MAY RESULT IS SERIOUS BODILY INJURY.
These instruction apply too all of these great LED Bubbler Fountain Accessories from CMP!
Three Tier Fountain Attachment
25503-930-000
25503-931-000
25503-932-000
25503-933-000
25503-934-000
Water Ball Attachment
25503-910-000
25503-911-000
25503-912-000
25503-913-000
25503-914-000
Water Column Attachment
25503-920-000
25503-921-000
25503-922-000
25503-923-000
25503-924-000
WARNING
!
/