2. CMP
  3. 25606-000-000 Insert Inlet Eyeball

CMP 25606-000-000 Insert Inlet Eyeball Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the CMP 25606-000-000 Insert Inlet Eyeball Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
3/4" 3-1/4"
7/8"
EYEBALL
INTEGRALLY MOLDED
PRESSURE TEST
MEMBRANE. KNOCK OUT
AFTER TEST.
FACEPLATE
BODY
45
1-1/4" I.P.S.
4-27/32"
DIAMETER
1-1/2"
I.P.S.
1"
DIAMETER
12" to 36"
45 MAX.
PLASTER
EYEBALL
WALL INLET
POOL
WALL
1
2
3
4
5
6
7
8
9
3
10
3/16"
1/2"
3/4"
Right
Angle
Variable Orifice Nozzles
1 - Body
2 - Shield
3 - Ball/Face Plate Kit
4 - 3/16" Nozzle
5 - 1/2" Nozzle
6 - 3/4" Nozzle
7 - Right Angle Nozzle
8 - Eyeball
9 - Face Plate
10- 8-32 Screw x 1/2"
CMP 25606-000-000
INLET EYEBALL FITTINGS
WITH VARIABLE ORIFICE
®
Use of this fitting as a suction outlet is extremely hazardous. Risk of hair or body
entrapment, drowning or disembowelment. Do not use this fitting on any suction or
outlet fitting. Use only as an eyeball inlet fitting.
WARNING
TYPICAL INLET LOCATIONS
1113sb CUSTOM MOLDED PRODUCTS | 36 HERRING ROAD, NEWNAN, GA 30265 | WWW.C-M-P.COM
/