CMP 25513-4XX Operating instructions

0621sb CUSTOM MOLDED PRODUCTS | 36 HERRING ROAD, NEWNAN, GA 30265 | 770-632-7112 | WWW.C-M-P.COM

CERTIFICATE OF COMPLIANCE

DATE OF MANUFACTURE

ALL LISTED ABOVE ARE IAPMO LISTED UNLESS NOTED OTHERWISE

25513-4XX

25516-4XX

25516-5XX

The following products have been tested to ANSI/APSP - 16 2017 per Section 1404 of the Virginia

Graeme Baker Pool and Safety Act (VGBA-2017) and safety regulations set forth by the CPSC.

These products are manufactured by Custom Molded Products, Inc. in Shanghai, China and

certified by Underwriters Laboratories, Inc., at 2929 E. Imperial Highway, Suite 100, Brea, CA 92821

(ph: 714-223-3600) or IAPMO R&T Lab at 5001 E. Philadelphia Street, Ontario, CA 91761

(ph: 909-472-4100). A copy of the test results may be found at www.ul.com or www.pld.iapmo.org.

For CMP compliance inquiries please contact:

Kyle Trepp, pr[email protected], 770-755-5891, 36 Herring Road Newnan, GA 30265

Date of compliance testing:

December 1, 2020 to August 3, 2021

CMP - VGBA 2017 - NOVA POOL SUCTIONS

VGBA TESTED & CERTIFIED

ANSI-APSP 16 | CPSC TM

8.6 inch

217 mm