Aleratec 350126 Quick start guide

Aleratec
Brand
Aleratec
Model
350126
Type
Quick start guide

This manual is also suitable for

Quick Start Guide
Welcome!
Congratulations on your purchase of an Aleratec
HDD Copy Cruiser High-Speed, considered by
industry experts to be one of the nest Hard Drive
duplicators and sanitizers available.
The entire Aleratec team is committed to
providing you with courteous service. Our
knowledgeable staff will strive to make owning
and operating your new Aleratec HDD Copy
Cruiser High-Speed a pleasant experience.
This Quick Start Guide will lead you step-by step
through the basic operation procedures of your
HDD Copy Cruiser High-Speed.
For more detailed information on conguring the
HDD Copy Cruiser High-Speed and applying
it’s various capabilities, please refer to the User
Guide on the CD included.
We at Aleratec appreciate your selection of
our product, and wish you great success and
enjoyment of your new HDD Copy Cruiser High-
Speed.
Product Features
• Modelstoduplicateupto24HardDiskDrives
simultaneouslyatspeedsupto120MB/s
• Modelstosanitizeupto25HardDiskDrives
simultaneouslywithSecureEraseoryourchoice
of3Overwriteoptions:
▪ OnePass
▪ ThreePasswithVerify
▪ DOD5220.22-M7-Pass
• StandAloneOperation
• LockableQuickLoadDriveDoors
• Supports3.5”SATAHDDsandSolidStateDrives(SSDs)
• Supports2.5”SATAHDDsandSSDswithoptional
Aleratecadapters(P/N350106),notincluded
Key Items on the HDD Cruiser High-Speed
1:5 HDD Copy Cruiser High-Speed
™
Part Number: 350125
1:11 HDD Copy Cruiser High-Speed
™
Part Number: 350126
1:16 HDD Copy Cruiser High-Speed
™
Part Number: 350127
1:24 HDD Copy Cruiser High-Speed
™
Part Number: 350128
Controller:
LCD Display
OK is used to execute a
function, or enter a menu
ESC is used to cancel a
function, or exit a menu
UP arrow is used to scroll
backward through functions
or menus
DOWN arrow is used to
scroll forward through
functions or menus
Controller
Drive LEDs
Display
Panel
Drive Bay
Handle/Tab
Target
Drives
Warning: This product has a manually switchable
power supply. Make sure that the power supply
is set to the proper voltage for your region.
Source
Drive
Drive Bay
Lock
Included Items
•HDDCopyCruiserHigh-Speed™
•QuickStartGuide(thisdocument)
•HDDBayKeys
•PowerCord
•UserGuideCD
•RegistrationCard
•StandComponents(350126only)-6pieceswithscrews
See instructions on page 6 of the User Guide.
(350126 shown)
© 2013 Aleratec, Inc. 9851 Owensmouth Avenue / Chatsworth, CA 91311 U.S.A. Document Number: 350125-350128_ENG_QSG_Rev_A
Specifications subject to change without notice.
Technical Support Addresses and Phone Numbers
• Bye-mail:[email protected] – Skype:support.aleratec.com
• ByTelephone:1-818-678-0484 – FAXat:1-818-678-0483
• TechnicalSupportGroupcanbereached8:00AMto5:00PM,PacificTime,MondaythroughFriday,excludingU.S.holidays.
Pleasetrytocallfromaphonenearyourcomputersystem.
Accessisavailable24hoursaday,365daysayear,viaTheWorldWideWebat:www.aleratec.com
Getting Started
Loading the Hard Drives
1. Openthedrivetraydoorsbyliftingthetabontheleftsideofeachdrivebayyouwishtouse.
2. TaketheHardDiscDrive(HDD)andalignthedrive’sSATAplugtothelowerrighthandsideofthedrivebay.
3. SlidetheHDDintothedrivebayuntilitstops.Thedrivewillstillbeabout1inchoutsideofthebay.Whenthedoorisclosedit
willpushandplugtheHDDintotheduplicator.
4. Swingthedrivebaydoorclosedandpresstheleftsideofthedooruntilthetablatches.Whenitlatches,aclickcanbefeltand
heard.
Note:Ifyouareduplicating,thesourceharddiskdrivegoesinthetopbay.
Copy HDD
The“Copy”functionperformsacopyfromasourceHDDtooneormoretargetHDDs.ThetargetHDDsmustbeatleastaslarge
asthesource.TheHDDCopyCruiserHigh-SpeedwillcopyeveryblockofcapacityonthesourceHDD.
1. LoadthesourceHDDandthetargetHDDsintotheHDDCopy
CruiserHigh-Speed.Thesystemwillauto-detectthehard
drives.Afterthedriveshavebeendetected,ascreensimilar
totheonetotherightwillbedisplayed.
Note:BeforecopyingbesurethatthecapacityofthetargetHDDisequaltoorlargerthanthesourceharddrive.
2. PressOKtostartcopying.Thesystemwillauto-detecttheharddrives.Thefollowinginformationwillbedisplayed.
3. DuringthecopyprocesstheHDDCopyCruiserHigh-Speed
willdisplayprogressinformation.
Note: Thecopyingspeed,capacityanddurationmayvary
fromoneharddrivetoanother.
4. Onceduplicationiscomplete,ajobstatusscreenwillbe
displayed.

Please refer to the User Guide found on
the disc for more detailed information.
ESC
OK
Aleratec
1. Copy
ESC
OK
Detect Drives
Please wait...
ESC
OK
Searching Source
ESC
OK
Analyzing Source
ESC
OK
Copy 50.9 G
1 Target Ready
ESC
OK
Copy 16 50.9 G
7:35 26% 13.5 G
ESC
OK
Pass: 1 Fail: 0
Time: 20:18
Page is loading ...
© 2013 Aleratec, Inc. 9851 Owensmouth Avenue / Chatsworth, CA 91311 U.S.A. Numéro de Document : 350125-350128_ENG_QSG_Rev_A
Les spécifications sont sujettes à changement sans préavis.
Mise en route
Chargement des disques durs
1. Ouvrezlestrappesdesbaiesdedisquedurensoulevantlalanguettesurlecôtégauchedechaquebaiequevousvoulezutiliser.
2. PrenezledisqueduretalignezsonconnecteurSATAsurlapartieinférieuredroitedelabaie.
3. Faitesglisserledisquedurdanslabaiejusqu’àlabutée.Ledisquedurressortiraalorsencoreunpeudelabaie.Lorsquevous
refermerezlatrappe,celle-cipousseraetenclencheraledisquedurdansleduplicateur.
4. Refermezlatrappedelabaiededisqueduretappuyezsurlecôtégauchedelatrappejusqu’àcequ’ellesoitparfaitement
verrouillée.Aumomentduverrouillage,undéclicseferaentendreetsentir.
Remarque :
sivousprocédezàuneduplication,insérezledisquedursourcedanslabaiesupérieure.
Copy HDD (Copie du disque dur)
Lafonction“CopyHDD”effectueunecopieréelledudisquedursourceversunouplusieursdisquesdurscible.Lesdisquesdurscible
doiventavoirunecapacitéaumoinségaleàcelledudisquesource.LeduplicateurHDDCopyCruiserHigh-Speedcopierachaquebloc
dudisquedursource.
1. Chargezledisquedursourceetlesdisquesdurscibledans
leduplicateurHDDCopyCruiserHigh-Speed.Lesystème
détecteraautomatiquementlesdisquesdurs.Unefoisles
disquesdétectés,unécransimilaireàceluidedroiteapparaîtra
Remarque :lavitessedecopie,lacapacitéetladurée
peuventvarierd’undisqueduràunautre.
2. AppuyezsurlatoucheOKpourdémarrerlacopie.Lesystèmedétecteraautomatiquementlesdisquesdurs.
3. Pendantleprocessusdecopie,leduplicateurHDDCopy
CruiserHigh-Speedafficheralesinformationsdeprogression.

Remarque :
lavitessedecopie,lacapacitéetladurée
peuventvarierd’undisqueduràunautre.
4. Unefoisladuplicationterminée,unécrand’étatdela
tâcheapparaîtra.

Pour plus de détails, veuillez vous reporter au
manuel d’utilisation figurant sur le CD inclus.
ESC
OK
Aleratec
1. Copy
ESC
OK
Detect Drives
Please wait...
ESC
OK
Searching Source
ESC
OK
Analyzing Source
ESC
OK
Copy 50.9 G
1 Target Ready
ESC
OK
Copy 16 50.9 G
7:35 26% 13.5 G
ESC
OK
Pass: 1 Fail: 0
Time: 20:18
Adresses Et Numéros de Téléphone du Support Technique
• Courriel:[email protected] – Skype: support.aleratec.com
• Téléphone:1-818-678-0484 – Fax: 1-818-678-0483
Legroupedusupporttechniquepeutêtrejointentre08:00AMet17:00PMheureduPacifique,dulundiauvendredihors
joursfériésaméricains.Veuillezappelerdepréférencedepuisuntéléphoneàproximitédevotresystèmeinformatique.
• Vouspouvezaccéder24heures/jour,365joursparanau:Web:www.aleratec.com
Page is loading ...
© 2013 Aleratec, Inc. 9851 Owensmouth Avenue / Chatsworth, CA 91311 U.S.A. Número de Documento : 350125-350128_ENG_QSG_Rev_A
Las especificaciones pueden sufrir cambios sin previo aviso.
Introducción
Carga de los discos duros
1. Abralastrampillasdelasbahíasdediscodurolevantandolalengüetadelaizquierdadecadabahíaquequiereutilizar.
2. CojaeldiscoduroyalineesuconectorSATAconelladoinferiorderechodelabahíadedisco.
3. Desliceeldiscoduroenlabahíahastaquesedetenga.Eldiscoduroseguiráestandounoscentímetrosfueradelabahía.Cuandola
trampillasecierre,empujaráyconectaráeldiscoduroenelduplicador.
4. Cierrelatrampilladelabahíadediscoypresioneelladoizquierdodelatrampillahastaquecierrelalengüeta.Cuandolohaga,
podrásentiryoírunclic.
Nota: Sivaaduplicar,eldiscoduroquevaacopiarsedebecolocarenlabahíasuperior.
Copy HDD (Copia del disco duro)
Lafunción“CopyHDD”realizaunacopiarealdeldiscoduroorigenenunoomásdiscosdurosdestino.Lacapacidaddelosdiscos
durosdestinotienequeseralmenosigualqueladelorigen.ElduplicadorHDDCopyCruiserHigh-Speedcopiarácadabloquede
capacidaddeldiscoduroorigen.
1. Cargueeldiscoorigenylosdiscosdestinoenelduplicador
HDDCopyCruiserHigh-Speed.Elsistemadetectará
automáticamentelosdiscos.Unavezquesedetectanlos
discos,apareceráunapantallasimilaraladederecha.
Nota:Antesdecopiar,asegúresedequelacapacidaddeldiscodestinoseaigualomayorqueladeldiscoorigen.
2. PulseOKparainiciarlacopia.Elsistemadetectaráautomáticamentelosdiscos.
3. DuranteelprocesodecopiaelduplicadorHDDCopy
CruiserHigh-Speedmostraráinformacióndelprogreso.
Nota: lavelocidaddelacopia,lacapacidadyladuración
puedenvariardeundiscoduroaotro.
4. Alfinalizarladuplicaciónapareceráunapantalladeestado
deltrabajo.

Para obtener información más detallada,
consulte la Guía del usuario en el CD incluido.
ESC
OK
Aleratec
1. Copy
ESC
OK
Detect Drives
Please wait...
ESC
OK
Searching Source
ESC
OK
Analyzing Source
ESC
OK
Copy 50.9 G
1 Target Ready
ESC
OK
Copy 16 50.9 G
7:35 26% 13.5 G
ESC
OK
Pass: 1 Fail: 0
Time: 20:18
Contactos del Soporte Técnico
• Bye-mail:support@aleratec.com – Skype: support.aleratec.com
• Teléfono:1-818-678-0484 – FAX:1-818-678-0483
SepuedecontactarconelGrupodesoportetécnicode08:00a17:00,horadelPacífico,delunesaviernes,
exceptolosdíasfestivosdeEE.UU.Intentellamardesdeunteléfonoqueestécercadesuordenador..
• Accesodisponible24horasaldía,365díasalaño:Páginaweb:www.aleratec.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Aleratec 350126 Quick start guide

Aleratec
Brand
Aleratec
Model
350126
Type
Quick start guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents