2. Computers & electronics
  3. Data storage
  4. Data storage devices
  5. Media duplicators
  6. Aleratec
  7. 350104

Aleratec 350104 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Aleratec 350104 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Quick Start Guide
Welcome!
Congratulations on your purchase of an Aleratec
1:5 HDD Cruiser, considered by industry experts
to be one of the nest Hard Drive duplicators and
sanitizers available.
The entire Aleratec team is committed to
providing you with courteous service. Our
knowledgeable staff will strive to make owning
and operating your new Aleratec 1:5 HDD Cruiser
a pleasant experience.
This Quick Start Guide will lead you step-by step
through the basic operation procedures of your
1:5 HDD Cruiser.
For more detailed information on conguring
the 1:5 HDD Cruiser and applying it’s various
capabilities, please refer to the User Guide on the
CD included.
We at Aleratec appreciate your selection of
our product, and wish you great success and
enjoyment of your new 1:5 HDD Cruiser.
Included Items
• 1:5HDDCruiser
• PowerCord
• UserGuideCD
• QuickStartGuide(thisdocument)
• AleratecRegistrationCard
Product Features
The1:5HDDCruiserisaHardDiskDriveDuplicatorand
HardDiskDriveSanitizer.
• Sanitizes/Wipesupto6drivescleanwithSecure
EraseorthechoiceofthreeOverwritepatterns:
▪ OnePass
▪ ThreePasswithVerify
▪ SevenPassperDoD5220.22M
• Duplicates/Makesupto5HDDcopiesatonce
• Quickloaddrivebays
• Supports3.5”SATAHDDs
Optional2.5”SATAHDDAdapteravailable(Aleratec
PartNumber350105)
Key Items on the 1:5 HDD Cruiser
1:5 HDD Cruiser™
Hard Drive Duplicator and Sanitizer Part No. 350104
Controller:
ENT
HDD Cruiser
1-5 ver:
ESC
LCD Display
ENT is used to execute a
function, or enter a menu
ESC is used to cancel a
function, or exit a menu
UP arrow is used to scroll
backward through functions
or menus
DOWN arrow is used to
scroll forward through
functions or menus
Controller
Drive LEDs
Power Switch
Display Panel
Drive Bay
Handle/Tab
Drive Bays (6)
Warning: This product has a manually switchable
power supply. Make sure that the power supply
is set to the proper voltage for your region.
© 2013 Aleratec, Inc. 9851 Owensmouth Avenue / Chatsworth, CA 91311 U.S.A. Document Number: 9299056_ENG_Rev_D
Specifications subject to change without notice.
Technical Support Addresses and Phone Numbers
• Bye-mail:[email protected]
• ByTelephone:1-818-678-0484 – Skype:support.aleratec.com
TechnicalSupportGroupcanbereached8:00AMto5:00PM,PacificTime,MondaythroughFriday,excludingU.S.
holidays.
Pleasetrytocallfromaphonenearyourcomputersystem.
• Accessisavailable24hoursaday,365daysayear,via:
TheWorldWideWebat:www.aleratec.com
FAXat:1-818-678-0483
Summary of Operation
Loading the Hard Drives
1. Openthedrivetraydoorsbyliftingthetabontheleftsideofeachdrivebayyouwishtouse.
2. TaketheHardDiscDrive(HDD)andalignthedrive’sSATAplugtothelowerrighthandsideofthedrivebay.
3. SlidetheHDDintothedrivebayuntilitstops.Thedrivewillstillbeabout1inchoutsideofthebay.Whenthedooris
closeditwillpushandplugtheHDDintotheduplicator.
4. Swingthedrivebaydoorclosedandpresstheleftsideofthedooruntilthetablatches.Whenitlatches,aclickcanbe
feltandheard.
Note:Ifyouareduplicating,thesourceharddiskdrivegoesinthetopbay.
Copy HDD
The“CopyHDD”functionperformsanactualcopyfromasourceHDDtooneormoretargetHDDs.ThetargetHDDsmustbe
atleastaslargeasthesource.The1:5HDDCruiserwillcopyeveryblockofcapacityonthesourceHDD.
1. LoadthesourceHDDandthetargetHDDsintothe1:5HDDCruiser.Thesystemwillauto-detecttheharddrives.
Note:BeforecopyingbesurethatthecapacityofthetargetHDDisequaltoorlargerthanthesourceharddrive.
2. PressENTtostartcopying.Thesystemwillauto-detecttheharddrives.
3. Duringthecopyprocessthe1:5HDDCruiserwilldisplayprogressinformation.
Theamountofdataremainingtobetransferred(showningigabytes),andtimewillbedisplayedindecreasing
incrementsasthepercentageofcompletionincreases.
Note:Thecopyingspeed,capacityanddurationmayvaryfromonesourceharddrivetoanother.
4. Onceduplicationiscomplete,ajobstatusscreenwillbedisplayed.
ENT ESC
Copy- 36MB/s 0%
235.7GB 1:48
ENT ESC
1. Copy HDD
OK:1 Fail: 0
/