Quick Start Guide

Welcome!

Congratulations on your purchase of an Aleratec

HDD Copy Cruiser IDE/SATA High-Speed WL,

considered by industry experts to be one of

the nest Hard Drive duplicators and sanitizers

available.

The entire Aleratec team is committed to providing

you with courteous service. Our knowledgeable

For more detailed information on conguring the

HDD Copy Cruiser IDE/SATA High-Speed WL and

applying it’s various capabilities, please refer to the

User Guide on the CD included.

We at Aleratec appreciate your selection of

our product, and wish you great success and

enjoyment of your new HDD Copy Cruiser IDE/

SATA High-Speed WL.

Product Features

• Quicklyclonesupto24orthoroughlysanitizesupto25

• Third-partycertified7-Passwipesanitizationfunction;

SecureErase,1-Passor3-PasswithVerify

• LEDindicatorsoneachHDDbaythatvisuallyconfirm

successfulcompletionfortheharddrive

• Supports3.5”IDEHDDsand3.5”/2.5”SATAHDDs

• Supports2.5”IDEHDDswithoptionalAleratecadapters

(P/N350116),notincluded

Key Items on the HDD Copy Cruiser IDE/SATA High-Speed WL

1:5 HDD Copy Cruiser IDE/SATA High-Speed WL

™

Part Number: 350140

•SATAHardDriveTrays

•StandComponents(350141only)-

6pieceswithscrews

•USB2.0Cable

•UserGuideCD

•RegistrationCard

Getting Started

1. Openthedrivetraydoorsbyliftingthetabontheleftsideofeachdrivebayyouwishtouse.

2. TaketheHardDiscDrive(HDD)andalignthedrive’sIDEplugtothelowerrighthandsideofthedrivebay.

3. SlidetheHDDintothedrivebayuntilitstops.Thedrivewillstillbeabout1inchoutsideofthebay.Whenthedoorisclosedit

willpushandplugtheHDDintotheduplicator.

4. Swingthedrivebaydoorclosedandpresstheleftsideofthedooruntilthetablatches.Whenitlatches,aclickcanbefeltand

CruiserIDE/SATAHigh-SpeedWL.Thesystemwillauto-detect

theharddrives.Afterthedriveshavebeendetected,ascreen

similartotheonetotherightwillbedisplayed.

Note:BeforecopyingbesurethatthecapacityofthetargetHDDisequaltoorlargerthanthesourceharddrive.

2. PressOKtostartcopying.Thesystemwillauto-detecttheharddrives.Thefollowinginformationwillbedisplayed.











willdisplayprogressinformation.

Theamountofdataremainingtobetransferred(showningigabytes),

andtimewillbedisplayedasthepercentageofcompletionincreases.



Note: Thecopyingspeed,capacityanddurationmayvaryfromone

harddrivetoanother.

4. Onceduplicationiscomplete,ajobstatusscreenwillbedisplayed.



Please refer to the User Guide found on the disc for

more detailed information.

ESC

OK

ESC

OK